Matching C20 with ISDN link question

Similar Questions

• matching codec c40 with ISDN link problem

  Hello world

  Would really appreciate if someone can help me with my problem.

  I have 2 sites. Each site has a c40 codec which is connected to a cisco ISDN link box. Each box contains 3 BRI connections. The system is essentially set up at the video-conference from one site to the other. C40 codecs have been paired with boxes of ISDN link manually due to the old firmware. Now that the firmware has been upgraded on all devices, I am trying to pair the codec with the ISDN link using the 'auto' mode so I can configure the ISDN codec c40 GUI link.

  The problem I have is that when I pair it in auto mode, the ISDN link is seen by the codec and matched succesffuly but I get an "error" and the reason for the error is "no sip registered to peripheral H320" or something of the sort. The rest of the configuration is the same, all im doing is pairing in auto mode. At this point, I can't do a video call-out. Can I make changes to the GUI hoewever c40 ISDN link and it shows as paired.

  When I change the sip profile out to 'off' in the sip codec c40 profile settings, now, there is no error. The sip profile in the ISDN link area is also set to off.

  Can someone help me what are the correct settings for outgoing SIP and the above error message please. It will be greatly appreciated.

  Thank you

  Hello

  Outgoing SIP should be turned off if you use the ISDN codec liaison, so please meke it took off.

  for the composition, should not use composition commnad complex that you scoop with TC 5.x and IT 1.0,

  With TC 6.x just enter number and select protocol H320.

  HTH

  Kind regards

  Dharmmesh

• SX20 with ISDN link and vcs

  Hi all

  I have sx20 quickset with device connection isdn with 4 Numéris.

  I want to register the sx20 VCS also.

  in sx20 there is no secondary network to connect the ISDN connection device.

  How can I configure the ISDN link for incoming and outgoing calls using ISDN link and also I need register sx20 VCS.

  my version of sx20 is 5.1.6 and 1.0.0

  Hello

  Don't you won't need a key for unlocking,

  Thank you

  Ravi kr.

• ISDN link and automatic matching IL1.1.3 and TC 7.2

  Hi all!

  I put the TC7.2.1 registry running on 10.5 CUCM implement Cisco MX700.

  I try to pair with this endpoint the ISDN link with the latest IL1.1.3.

  I followed the documentation that indicates endpoint and ISDN link should be in the same subnet, which is the case (both devices are on the same switch, same subnet, same vlan, no firewall).

  But when I try to manage the devices in order to discover the ISDN link, nothing, endpoint is not able to find it.

  I'll double check on the CLI of ISDN connection If pairing is in auto mode, which is the case.

  I would like to know if there is something missing?

  Thank you

  Gabriel

  Please make sure you have IPv6 enabled on endpoint and ISDNLink.

  Wayne
  --
  Remember the frequency response and to mark your question as answered as appropriate.

• Cisco Telepresence ISDN link with endpoint SX20

  Hello

  I have two SX20 and an ISDN connection.

  Knowing as ISDN link manage calls for an endpoint, how can route calls to Internet of endpoint connected to the ISDN link box?

  Is their any possibility to separate between ISDN and IP calls?

  Thanks and greetings

  Driss

  The ISDN link can be connected to both the ISDN services and your local network to make calls over IP or ISDN.  See the example of the C40 "Combining of ISDN and IP" in the link ISDN data sheet and the section on outbound calls in the Setup Guide.  These are also detailed in the Administrator's Guide.

  Wayne

  --

  Remember the frequency responses and mark your question as answered as appropriate.

• Of packet losses causing ISDN link

  Hi all

  I have a little more trouble with the ISDN link. Everything works perfectly now, I can make calls to 384 k ISDN.

  The problem now is that packet losses arises (not much,<1% total)="" when="" connected="" through="" the="" link="" into="" a="" lan.="" to="" clarify,="" the="" sx20="" needs="" to="" function="" over="" both="" isdn="" and="" ip="" (it's="" replaced="" an="" old="" tandberg="" edge).="" in="" lan="" calls,="" if="" i="" bypass="" the="" link="" completely="" and="" plug="" straight="" into="" the="" wall="" tap,="" the="" packet="" loss="" is="" at="" 0.0%.="" put="" it="" back="" in,="" packet="" loss="" is="" back="" up="" again.="" this="" is="" without="" changing="" any="" settings="" on="" either="">

  Any ideas what could be causing this? I'm just trying to use the ISDN link in which it is never intended?

  You do no way, it was not designed to be is supposed to work this way, allowing you to make IP or ISDN calls.  We have ours up and running in this way and it works well.

  One thing to check would be the network cables that you are using - good markets and bad cables can often cause problems when using a quality cable can solve the problem.

  Check your switch configuration to make sure that you are not forcing a setting the speed/duplex, which then is not being properly negotiated by the equipment then plug (or make sure that force you the settings the entire path if you need to do).

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• The upgrade of Cisco ISDN Link software

  Hi guys!

  Miss me something, when you try to download the software on the ISDN link. I have the connected to the PC via a serial cable, I can then go into the API with HyperTerminal and set the root password, but when I try to connect with WinSCP I just get the error ' gethostbyname: unknown error "." I need to enter the hostname of course, this is a silly question probably, but that is the same as the name of the system unit?

  I can't use the URL method since we have no internet connectivity for the device.

  Any ideas would be very welcome, it's probably something very simple that I'm missing. The current configuration is the default value of the plant besides the root password change.

  WinSCP requires that your ISDNLInk and your PC are both on the IP network, it is not copy on a serial connection, you are just using the connection set for call orders.  Similar to the TFTP method (what you can do on your own TFTP server, it cannot be the one on the Internet).

  Another option, which I think the best way to upgrade an ISDNLInk, is to do it via the web interface of the SX20 or some point of endpoints that you use with and you can download the file via your web browser.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• How to activate a part of an image with a link when creating emails?

  How to activate a part of an image with a link when creating emails?

  Hello. You can do this with an image map, but there are some questions that you need to consider before using a. Check out this blog for some thoughts on the subject:

  http://www.campaignmonitor.com/blog/post/3475/image-maps-in-HTML-email/

• How to send an email with the link that has the user id?

  Hello everyone, I'm trying to send an email with the link that includes the user id. After users click the link, they should be able to see the form with their information that has been previously fulfilled. So my question is after I have send email how and what is the best way to get information and show it to the user. What should be separate page with the cfquery limited on the id user or something else? If anyone has an idea of what is the best way to do it please let me know. I already have my code who send e-mails.

  You save all the fields submitted initially to a database?  If so, run a query and then convert them to the form field, query values. I don't know what looks like your data (or database), but a simplified version might look like this.

  SELECT FirstName

  OF SavedFormTable

  WHERE ID =

• At CS6 fixed the body with dynamic links AE slow render problems?

  I've got body with dynamic links AE slow render problems similar to those described in this thread:

  http://forums.Adobe.com/thread/904652?start=0 & tstart = 0

  As I understand (and I could well be wrong), if I made a project for which AE projects linked dynamically in (something simple lower thirds of the color adjustment), when rendering AE bits run as a service, which limits the EI bits single processor and actually stops made simultaneous multiple images. That's why I can get very high makes times (essentially no parallel processing), and why play with the number of units allowed for simultaneous frame rendering, or the amount of RAM said that processors can access, did little or no effect on the total render time.

  Supposedly some AE point would be changed as it has used Media Encoder to make it is made (even as Agency), thereby speeding up rendering for any project of which parties linked dynamically in AE.

  We did it in CS6? If not, any idea when that is scheduled to occur?

  It turns out that it is a 'feature '. A kind gent on the AE forum has pointed out to me a document that I have already read many times trying to understand that and has fact me understand it finally:

  http://help.Adobe.com/en_US/AfterEffects/CS/using/WS92A6319B-B1EB-4b49-A09A-9FFE83E6CD37.h tml

  And it's right there in print at the bottom: "Note: a linked After Effects composition will not support made simultaneous multiple images of multiprocessing"underlining.»

  So the answer to my question is no. Adobe that has not yet set. I really hope they do well. This is a killer of serious performance at the time of export. Large enough to allow a use AE for everything that affects all images (such as color grading, or denoising) completely useless to me. Sigh...

  And Yes, I did a feature on that request.

• Why can't I send an e-mail with youtube links

  I got two youtube links in an email and sent it to me as a test. He never came through. Logging of text through. Why not with the links?

  Then you should talk to your email provider.

• HELLO, I'M FACED WITH A PROBLEM WITH MY SECURITY QUESTIONS, I FORGOT THE ANSWERS AND NOW I CAN'T RESET, CAN YOU HELP ME?

  Hello

  I AM FACING A PROBLEM WITH MY SECURITY QUESTIONS.

  I FORGOT THE ANSWERS AND NOW I CAN'T RESET, CAN YOU HELP ME?

  Hello

  You will need to contact the Apple Support. (Nobody here can reset your security for you questions: it is a community based on the user, not the Apple Support).

  Contact information for the Apple Support:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  I can not open a new tab (empty) I change all the settings. However as I said well can I open a new tab with a link without a link, I can't open a new (empty) tab.

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• XIA Pixie-4: can I use it with MXI link?

  Dear colleagues!

  Please advice me can use digital Pixie-4 (from manufacturer of XIA) spectrometer with MXI link if I know that there is a special software for LabVIEW 8.5 kit?      This kit has been tested only on 8174 embedded plc and without having tested with MXI link.

  I heard somewhere, if the software package supports LabVIEW 8.5 then MXI link will also work.

  Current 93,

  How works MXI is that he essentially developed bus PCI/PCIe to your PC to allow additional devices working on it. Since it is an instrument of third parties, we cannot make any guarantees about the reliability of their products in some systems. There are some third-party products that can not handle operating systems 64-bit, as well as some computer manufacturers who are unable to manage bridge PCI expansion and this should take into consideration when you decide to use a MXI card in a PXI chassis. However, I believe that as long as your device Pixie-4 of XIA is compatible with the version of Windows and any software on this computer, then it should not cause problems with start-up and operation. Devices may also not appear in measurement and Automation Explorer because they are third-party devices, however, if you have software installed on the PXI-8184 controller, then the same software should work on the desktop PC that uses the MXI map as the same data to which are connected the 8174, is accessible by the MXI Board.

• How to interface a sensor with IO-Link

  Does anyone have experience interface LabView with IO-Link? I have a remote sensor that can be apparently programmed using IO-Link, but information on the IO-Link bus is rather sparse. I would be very happy if someone could share their experience/advice.

  Hi Dan,.

  Sorry, we do not have a simpler solution. I would like to know if you find a way to go on this.