How to save a copy of Windows XP that has been created by an image?

I used 'Image for Linux' to create an image of a PC with Windows XP, SP3.  With that done, I can copy the image to a new PC and it works fine (assuming that I stay within the limits of the PC HAL).

My problem is that I don't have to enter a new key of Windows XP when I installed the image on another PC. for example, I use a license of Windows XP on two PCs.  Since I want to be legitimate on my software license, I tried to activate Windows XP license to new PC - but the computer says that the license is already activated.  So it is logical that the new PC would react like that - I put the picture of an activated copy of Windows on a new PC, the new copy of Windows must also think that it is enabled.

All this brings me to my original question: how to save a copy of Windows XP that has been created by an image?

Advertisement

Hi RichardMatt,
 
I recommend you contact the customer service of Microsoft for queries on activation for clarity.
 
See the following article to do the same thing:

Tags: Windows

Similar Questions

  • How can I determine if the windows vista that has been deleted from my computer was a 32 or a 64-bit system? (I have windows product id number).

    I have the old and the new windows product ID number

    My computer is no longer available, so I can't get any information from the provider

    Hi LHarrison,

    You can get in touch with the Microsoft Customer Service to validate the product Key\ID and get more information about the product you are using.

    For more information, you can consult the following articles:

    Contact Microsoft

    How to identify, locate, and replace a product key

  • How to make a backup of the reports that has been created/generated on the grid

    Version grid = 10g
    Database version = 11g

    Reports was created inside the grid (report tablespace_usage), is there a way to do that effectively save? Now, I do it manually, by selecting each report and then saving them as a word document. I still have 200 reports to go. Any help would be appreciated.

    Concerning
    Dexter

    One possibility is to simply add another email address to the list of recipients for reports that goes to a read-only shared mailbox or a mail deposit box and leave the backup on the e-mail server to take care of it.

  • How to locate the owner of an iPhone that has been reported lost and deleted?

    How to locate the owner of an iPhone that has been reported lost and deleted?

    You return to the police or to the carrier the phone is bound to and let them deal with him. Privacy laws prevent Apple, or the carrier to disclose this information.

  • How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

    Mr President

    This is the page of the glassfish Server

    gfurl.png

    How to find the url of adf application that has been deployed to the glassfish Server? I try but? It is the image of the page.

    webapplink.png

    In the jdev web module are

    [11: 09:38] wrote the Web for F:\backup of AshCMS\AshCMS\ViewController\deploy\AshCMS_ViewController_webapp.war application Module

    [11: 10:33] wrote the Module Enterprise Application to F:\backup of AshCMS\AshCMS\deploy\AshCMS_Project1_AshCMS.ear

    [11: 10:33] Application deployment...

    [11: 14:24] Application deployed successfully.

    [11: 14:24] time to deployment: 8 minutes, 11 seconds

    [11: 14:24]-deployment is complete.  ----

    what url in the browser.

    Concerning

    Mr President.

    I run my application on built-in web logic server and get the url from there

    http://localhost:7101 / ViewController/faces/MainPage

    then simply change the localhost of 7101 to 8081 as below

    http://localhost: 8081, ViewController, faces, MainPage

    and it works

    Concerning

  • How can I recover data from a disk that has been done under windows xp with the new computer that is running windows 7?

    My drive has been created using a windows xp windows live care and my new computer works with windows 7. How can I get information on the new computer. When I tried to download the software of microsoft it would allow me to do. Any ideas?

    Hi Dorene33,

    ·         What exactly happens when you try to download the software?

    ·         You receive an error message?

    ·         You are able to access drive from devices and printers?

    ·         What happens exactly when you double click on the drive and try to open it?

    I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

    Hope this information helps.

  • How can I system recover my w500 tab that has been renovated

    How can I system recover my tab w500 which has been renovated and did not come with recovery CD/PARTITION. I got the runaround on this recovery info and no one wants to be responsible and to help me. So now I am subject to an acer store which says that I have no options for this product. When I emailed for help, it bounces invalid address. I paid a lot of money for this thing and I NEED HELP! SN: LERK602047118060BA6500.  I'm out!

    They are not on the site, because it is a Tablet, if you call - they can get it for you.

  • Where to buy a key legitimate to correct a purchased copy of Windows 7 which has been hacked?

    I bought a copy of windows 7 ultimate at a private person, and he has proved to be a pirated version.  I am looking to buy a legal key.  No matter if I buy a full version or an upgrade key since my computer just asks me to enter a valid key?

    Hello

    I'm sorry to hear that you bought a pirated version.

    You can buy a key for the full version that you have nothing to upgrade.
    Also I suggest that you do a full reinstall as you never know if the pirated version has been tampered with.

    You can buy it here:

    http://Windows.Microsoft.com/en-us/Windows/shop/Windows-7

    Kind regards

    Joel

  • How can I remove photos in an album that has been shared with me on my iPhone and Mac without unsubscribing to the album?

    How can I delete pictures on my iPhone 6 s and Mac Pro from an album shared with me without unsubscring to the album?

    Whence the Album? This would help to diagnose. Normally, on film, you select the photos you want, remove them and the album goes.

    If the Album has been synchronized from your computer using iTunes, then make a new synchronization without the selected album.

  • How can I get an e-mail account that has been compromised? When I followed the steps need me just back in loop.

    My hotmail email has been compromised, I can't change the password, someone tried to enter into the account by using a password wrong too many times. The information takes me just round in a loop. I need to get my list of contacts of the compromised account so I can transfer to a new e-mail account. I had this account to hotmail for a long time and I really want this back, but with the security knowing that he has not been hacked. At the very least, I want to be able to get my contacts.

    Hello

    You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

    In addition, see:

    http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

    https://windowslivehelp.com/PasswordReset.aspx

  • OIM11gR2ps2 how to use OID - 11.1.1.6 Connector for updating a user that has been created through LDAPsync?

    Hello

    I have two connectors configuration, a database connector generic to an Oracle database that the provisions of a user account (it works fine). The second connector, I am still getting set up properly is a LDAP connector specifically OID - 11.1.1.6.0.

    Use case:

    A user creates an account through automatic recording and is created simultaneously in OUD ldap with the johnDoe1 username. johnDoe1 connects in IOM and asks an instance of application called DBAccount. They fill out the application in all there information (user ID, fname, lname, phone, address, title, etc.). Once they support demand goes through the necessary approvals and after that it's approved successfully the info is put in service to the database. Once this operation has been successful, I would like to provision an update a users ldap entry that was created in the custom attribute ldapsync is called OUDappusername, this attribute is an attribute with value mutli because if demand for the other apps, they will be updated in the OUD aswell. This OUDappusername will be generated by an event handler or to pre-populate the plugin and the format will be "app |" user name' where app is the app they ask and User_name is the user name they use to connect to the IOM, for example "DBAccount". johnDoe1. If they keep asking other apps they will be updated in the OUDappusername so that they may have DBAccount | johnDoe1 and ask another application called app2, then they will also have app2 | johnDoe1 and so on.

    Is this possible with the connector and how do I set it up to users update rather than set up a new account in the OUD?

    The question:

    I currently have the configuration of connector so whenever I have set up a user creates a new user rather than allow me to simply update a user. It is possible to configure the connector for updating existing users is born through ldapsync, rather than those created through the app instance configuration. I have found no documentation on that.

    Thanks in advance,

    J

    Edit #1 - I changed the wording and added more details.

    Edit #2 - I reworded my question to be more specific and focus on a single issue and changed the title to be more specific.

    Post edited by: 6d986dc3-6c9b-401d-9892-76032e7a1e05 on April, 07/04/2014

    Hello

    I just wanted to post what we found the answer. We did not use the connector, but what we did was we created a custom, adapter, which is a small and associated java class then new task in the process definition for the database resource in the console design and we made calls to jndi for the ldap Protocol to update this attribute multivalue. It was very quick and easy and could be tested before the implementation of the IOM. Thanks again for all the help and talk me through the procedures.

    Thank you

    J

  • Backup need help to install a new version of windows xp that has been saved in my c: / my 053110 0240 pm backup

    I've accidentally done a system recovery for windows xp on an old record.  On the back of the screen it said that it would save my current version of windows xp on my drive c as c; /My Backup 053110 0240 pm.  It appears in my drive c currently but I can't understand how to reinstall it from there. I tried the system restore and it keeps only let me restore to the point that I put the old version in and nothing before.  How can I get my backup version to install from drive c. help, please

    Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Why Windows Explorer crash if I shift-delete a directory that has been created as part of the 'libraries' of in the Exporer in the pane hierarchy of directory on the left side of the Explorer?

    I just discovered a very basic bug in Windows 7 file Explorer:

    Open the folder "libraries." Select any item under 'Libraries', for example 'Documents '. In the hierarchy of folders in the 'Documents' left right click and select 'New'-> 'folder '. Select the directory newly created in the hierarchy of folders (always in the left frame of the Explorer). Right-click in the right frame and select 'New'-> 'text Document '. Open the newly created document, enter text and save it. Now, again select the new folder in the hierarchy of folders in the left frame and type + . An error message appears stating something like "C:\Users\Public\Documents\FOO refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »

    When you click OK in the window of the Explorer will crash and respan itself after a short period of time.

     
    What is the full error message?
    What changes were made before the grant took place?
    How long you have been facing this problem?
     
    You can use the following methods that can help you solve your problem:
    Method 1: try to make the SFC scan on the computer.
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833
    Method 2: If above method does not work, try to perform the clean boot and check for the issue:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

    Method 3: If that does not work, create a new user account and verify. If it works in a new user account, then probably your user account have been damaged and would need a fix.

    Create a user profile.
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Now search for the question.

    Follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Method 4: You can also use Event Viewer to search for information on the problem.

    Reference:

    The display of the error messages in the event viewer
    http://support.Microsoft.com/kb/947321

    You can check for more information about this at the time where it appeared and post this information here to help us narrow down where the focus.

  • How to recover the file from local file, that has been accidentally deleted

    I accidentally deleted a local folder in an e-mail message, how can I get it... If it is possible?

    Hi MARIEFREEMAN,

    Which email client you have installed?

    If you use Windows Live Mail, I recommend you to ask your question to the Windows Live Mail support for assistance.

    If you use Hotmail, I recommend you to ask your question in the support forum for Windows Live Hotmail for assistance.

    http://www.windowslivehelp.com/forums.aspx?ProductID=1

    Reference: Windows Live Hotmail Top issues and Support information

    Hope the helps of information.
    Please post back and we do know.

  • How to restore the HARD drive recovery partition that has been deleted?

    Hello

    due to the mistake, I deleted the recovery of HARD drive partition.
    So, now, I am unable to restore for example. The system state of a fe hours before.

    Is it possible to "' once more HDRecovery?

    I really liked the functionality of this tool, so it would be nice but - is it possible? And how?

    N ° there is nothing you can do, except new disc order under https://backupmedia.toshiba.eu/landing.aspx
    I'm sorry. :(

Maybe you are looking for

  • Crackling with Thunderbolt resident Audio interface

    Hello I just bought a new Macbook Pro 15 inch retina, installed with El Capitan 10.11.4 and Logic Pro X, with a new interface reside Audio T4 Thunderbolt, and there is a cracking and sound distortion, crossing the input string. The output is very goo

  • Updating the BIOS RNNAS516

    Hello I would like to know how to check the version of the bios of my readynas 516 of internet explore. Also how have updated it as soon as the "manipulaton" isn't easy? Thanks in advance

  • Assistant adding hardware can not find software for USB tether Samsung Galaxy S 4 G phone

    I followed the process of uploading a file for xp called "tetherxp" from t-mobile. Connect the phone, follow the steps to guide Wizard to the folder "tetherxp" and then says cannot find the software. I moved the entire file to see if Assistant would.

  • Printing fuzzy HP laserjet cp2025 number

    Hello So I got a hp cp2025 who had problems of grinding coming from the transfer belt. So I ordered a replacement transfer belt. installed the new transfer belt in and did some testing of color printing. Squeak has disappeared and the print quality h

  • Very fluctuating download speeds

    My laptop HP 2000-46DX is located right next to my MAC mini.  I constantly receive dowload speeds in the 1920s on the MAC, but I'm getting speeds ranging from 3-16 Mbps on the HP, with 3 being the most common range. We have a wireless system with Cox