How to manage the high resolution of the images for 9860/9850 devices?

Similar Questions

• How to manage the threads for TCP communication?

  Hello

  I have a project to control two separate applications (C++ and LabView) and two of them are implemented as server. Another client program (C++) is used to control applications. Communication between them are implemented using TCP socket. The client program sends the message to start or stop tasks on servers. The client program also sends time (HH) with the message start and end to determine when to start or stop.

  Application in C++ (server): Listening to the request for the connection and when gets one, it creates a thread of communication allowing to manage this and listen again to another connection. Communication wire crossing of handles and messages when it receives a start or a stop message, it creates a thread of timer with the received time to trigger a task at the time specified. And after that he expects the client message. So, here, when the thread (communication, timer) is necessary, it is created.

  In LabView (server): I tried to create the same as the C++ server. But, in manual of LabView and other discussions of the forum, I got that LabView is multithreaded and it can be done with the help of the loop independent. So, I had to create four loops in a diagram:

  1. wait the new connection

  2 manage the communication for the already received connection

  3. start the timer

  4 stop the timer

  and they are executed at the beginning of execution and communication between them are managed using local variables. But, 2, 3 and 4th loop can handle only one connection and it can handle another if the current is closed. The C++ application can handle multiple connections by creating the thread when it is necessary, but not at the beginning of the application.

  Is there a better way to implement this in LabView?

  Is it possible to manage multiple connections and create the diagram node/block (such as a wire) dynamically as C++?

  Thank you.

  There are several ways to do so in modern LabVIEW and you should probably seek the Finder example for TCP examples. The classic is to transfer the refnum of connecting the listening loop in a communications loop that adds to an array of login credentials and then constantly iterates through this array to make the communication. He works on LabVIEW 4.0 perfectly for me even for applications with basic HTTP communication protocol. But you must make sure that the communication for a connection is not delaying his work for reasons that would delay the handling of other connections too, because they are really of course worked on sequentially. If you encounter an error, the connection ID is closed and removed from the table.

  The other is that create you a VI that makes your entire communication and ends on an error or when the order quite. Make this reentrant VI and then launch it through VI server as the instance home, passing the refnum of newly received connection form the listening loop. Then use the method to Run let start and operate as an independent thread.

  For all these, you should be able to find an example in the example Finder when searching for TCP.

• How to manage the image files used in PDF forms

  With LiveCycle, I created an interactive form for requests of Help Desk-type and the form works perfectly. I tested it and everything works. See the property. Hide, clear the fields. And all other behaviors I added with the Action Builder.

  As a final design feature, on my local machine at work, I've added a header image (which is in My Documents > my pictures). I have tested locally and downloaded the form in Sharepoint and tested from there, and from what I can remember, the form went well. The header was intact. So I assume that type of image has been incorporated somehow.

  Then I put the House file and opened it and - Voila! -No header image!

  That's happened?

  The image files need to be downloaded and the path relative to the location of the file? For me, it doesn't seem to be a huge problem. Something more. I can probably download the image to a location in Sharepoint, and then set the path to the image in the XML file.

  But I would like to hear the experiences of those who have used image files in their LiveCycle Forms.

  Post edited by: ashish gupta. to make the title more descriptive and added a few tags.

  In the palette object make sure you of incorporate Image data is checked.

• How to limit the bandwidth for each different devices connected to my router

  Hello

  Thanks in advance!

  Can you help me to limit bandwidth on perticular devices, I use NETGEAR (WNR1000v2 - N150 wireless router) and the version of the firmware of the V1.1.2.58, like almost 4 devices are connected to this router, I want to limit the speed of bandwidth to each device.

  I have not found the Qos in my Netgear.

  It might help if you provided in details with screenshots.

  Thank you

  Samira

  Not possible with this model of router

• How can I change the images for af:statusIndicator?

  The default icons (occupied and unoccupied) have a deep blue background, which is different from our background color selected for the application.
  
  According to the documentation of ADF for Section 16.6 Web development:
  
  "... you can use skins to change the actual image files in the component."
  
  Is there a code example on how to modify the image for af:statusIndicator?

  Hello

  You can check [this post | http://forums.oracle.com/forums/thread.jspa?threadID=615673] for some samples.

  Arun-

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• How to restore the configuration in new FireSIGHT (device RMA)?

  How to restore the configuration in new FireSIGHT (device RMA)?

  FireSIGHT need new license again or not?

  Licenses are issues associated with the license key of the management FireSIGHT pole. The key is a combination of the type platform (model) and the MAC address of the server.

  So, Yes, you will need more reissued. The case of the TAC which obtained you the RMA can serve as the basis for a request to the team of licensing for the reissue.

• How to reset the permission for application settings after installation?

  Hello

  One of my clients just sent me and she accidentally disabled (this refusal) "Geolocation" permission when you run the application for the first time.  She tried to uninstall and reinstall the app, but she says that the permissions screen is then short-circuited.  Does anyone know how to reset the settings for authorization for an application on the Playbook?

  see you soon

  Mark

  Unfortunately I still haven't a tablet to test this on, but looking at the screenshots of settings menu on the berryreview.com website, it seems that permissions can be managed in the Security tab.

• How to disable windows update auto update the driver for that particular device

  I have a MacBook air (13 inch, mid-2012)
  I had already used a thing of Apple called "bootcamp" to partition the hard drive. Boot camp also allows you to assign which os is used with starting the computer.

  Win 8 has been installed using an iso of Windows 8 and Microsoft Windows 7 USB DVD Tool to create a bootable USB key.
  That all worked. but there is no drivers as one might expect. If the video was VGA and there was no sound, etc.
  I downloaded a zip file containing all the drivers and an installer or install the program from apple.
  BootCamp5.0.5033.zip
  I ran the installer and everything was installed and worked. He couldn't believe my luck. I've now had about pain free installed win 8.

  But a frustrating problem has developed.

  Every day or so my external screen connected by a mini display port adapter stops working. I restore the
  pilot and it starts to work. So I guess that put automatic catch up and install a new driver. It does not work, I do this back and the cycle repeats. But... why...

  I see all over the internet means to stop windows auto update all together, but this isn't what I want.

  That is the question:
  Can someone help me to tell windows update doesn't auto not only the video driver?

  Here is some info in case it would be useful to you gurus
  This driver works:
  Graphics card Intel (r) HD 4000 (Microsoft Corporation - WDDM 1.2)
  Driver provider: Intel Corporation
  Driver date: 26/05/2012
  Driver version: 9.17.10. 2768
  Digital signer: Microsoft Windows

  This driver does NOT work:
  GPU Intel(r) HD 4000
  Driver provider: Intel Corporation
  Driver date: 12/12/2012
  Driver version: 9.17.10. 2932
  Digital signer: Microsoft Windows Hardware Compatibility Publisher
  Device Manager > display... > events tab

  A waste of time this as frustrating. Now how to force it to never automatically updated only the video driver.

  Hello

  You can not disable the automatic update to a specific device.

  However, you can take control and disable the AutoUpdate for all hardware devices, which is the best option.

  Press the Windows key + X to display the System menu , and then click Control Panel.

  Select devices and printers.

  In the top section, click on icon with the name of the computer and select the Settings of Installation of the device.

  In the settings window, select No, let me choose what to do and never install driver software from Windows Update.

  Click the save changes button.

  This will prevent the hardware drivers installed by Windows Update. You will receive still all the other updates to Windows as usual.

  If a piece of hardware should be updated in the future, you can just go the site of manufacturers of equipment and download/install the latest driver or reverse these options and get the driver from Windows Update.

  Concerning

• How to disable the image previews

  In the windows client there is an option to disable the image previews with

  Tools-> Options-> settings IM-> Show advanced options. Uncheck the option: "show images in conversations".

  In the client Mac there isn't this option. How to disable the image previews in a Mac client?

  OK, found the solution in another thread here: http://community.skype.com/t5/Mac/YouTube-thumbnails-amp-link-previews-Why-don ' t-I-see-them/m-p/39692...

  Menu bar-> display-> display Images-> uncheck

• How to disable the option for children to receive messages from my iPhone on their iPhones?

  How to disable the option for my children to receive my iPhone imesages on their iPhones?

  Do not share account iCloud with them. iCloud accounts are not meant to be shared.