How to manage the SAN relating to software, when we import machine which is connected to FC SAN?

Similar Questions

• How can change the end of thick disk when a virtual machine has been placed on the disk?

  After you have moved the virtual computer to another stage, chose the thin disk bad. Now, the virtual machine cannot start. the error message says that it must be thick for clustering. So, I need to change it back if possible. Then I moved it back and thick chosed. But, after that, I got a same error. So, after you move, the atatuse disk was not be changed. Is it a way not both directions? How can change the staus thin to thick?

  Thank you!

  George

  Hello George,.

  You can also convert virtual disks in eagerzeroedthick from the command line.

  vmkfstools-j VMname.vmdk allows to convert a thin disk in eagerzeroedthick

  vmkfstools k VMname.vmdk that will do it on a thick disk

  It can also work for a thin disk, click with the right button on the vmdk in browser data store, and then click 'inflate '.

  André

• How to manage the menu that is displayed when I right click and select "Edit In"?

  Currently, I have 17 programs/apps/plugins that appear in this menu.  I'll have to reinstall an earlier version of a program that I use a lot (OnOne) and which will add another items half a dozen to the list.  I only need one or two of the applications in the suite.  And then, I would add that another sequel, "Topaz" apps and which will still add to the confusion.

  All these 3rd party applications are connected to Lightroom via Plugins, but many of them do not appear in the list in the plugin Manager.

  Is it possible to manage this menu from Lightroom?

  -PS

  Hello

  CSN add you new applications in the externsl preferences editor.

• How to manage the padding issue & bytes - ordering when you change the resource (PiPL) file in windows?

  Hi all

  I just started programming sdk photoshop. I noticed that the resources provided by Adobe Guide recommends to develop dialogs using Mac ground language and converting it into window using the CNVTPIPL resource file. EXE. If you use a windows resource editor, padding and byte-ordered issue must be handled by the programmer himself. Since I'm not sure what is the architectural differences between a PC and a Mac, can someone explain to me exactly how padding and byte-ording problems are handled under the windows resource editor? It would be good if there is no concrete example.

  Thanks for any help!

  You really shouldn't edit resources directly if you can avoid it.

  Simply modify the .rc files or Betty and recompile.

  Macintosh, used to use the big-endian byte order, but didn't for several years because they switched to Intel processors.

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  I would like to know how to manage the ASN.1 encoding/decoding in LabView?

  Hello J,

  in the example given here , it looks like a format simple bytestream...

  You must read the byte stream, get the first and the second byte to decode the data type and length and then read & catalogued according to number of bytes. And then read 2 bytes and so on...

  Encoding will work the same but in reverse

• How to manage the tv after hdmi to hdmi connection

  I want to connect to my computer windows 7 with tv on my Vizio tv hd tuner. I intend to use the hdmi to hdmi connections. After that I made the connection how to manage the tv without going back to the computer. My TV is in another adjacent room to my computer, sbout 20 ft away. Can I use a wireless mouse to manage the tv? The monitor and tv both appear at the same time? What are other options? Thank you for taking my question and to meet others, I put in the forum. Donnie

  I guess that the xbox 360 is a must for my setup. Thanks for your reply, Donnie

• How to rebuild the registry key 'Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions '.

  How to rebuild the registry key 'Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions '.

  Hello

  Hkey_local_machine\software\microsoft\windows\currentversion\explorer\folderdescriptions

  Try to run the system restore.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run System Restore, you can consult the following link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Please can you tell me how to install the plug in Nik Software?

  Hello everyone, I have improved with some creative Photoshop clud.

  I opened the program and I have more ' Cap found in Silver Efex.

  Please can you tell me how to install the plug in Nik Software?

  See here:

  Installation of the Collection Nik in Photoshop CC - YouTube

• How to manage the SOAP response

  Hello (beginner vCO),

  I use the SOAP Plugin and trying to figure out how to manage the here, a host of SOAP response is the log I get the SOAP response

  [12:53:43.124 2014-05-09] [I] the settings...

  [12:53:43.135 2014-05-09] [I] the available settings:

  [12:53:43.136 2014-05-09] [I] + parameter name: "GetRequestStatusResult", value: "< response >

  < item >

  < ServiceRequestID > SR138917 < / ServiceRequestID >

  OS DEPLOYMENT < ServiceRequestStatus > < / ServiceRequestStatus >

  < ServiceRequestCreated > 09/05/2014-15:20:25 < / ServiceRequestCreated >

  < ServiceRequestCompleted > < / ServiceRequestCompleted >

  MA138921 < CurrentActivity > < / CurrentActivity >

  OS DEPLOYMENT < CurrentActivityTitle > < / CurrentActivityTitle >

  < ActivityStartUTC > 09/05/2014-15:32 < / ActivityStartUTC >

  < ActivityEndUTC > < / ActivityEndUTC >

  < DurationTotalSeconds > < / DurationTotalSeconds >

  < AverageDurationSeconds > < / AverageDurationSeconds >

  < SecondsOffAverage > < / SecondsOffAverage >

  < EstimatedCompletionUTC > < / EstimatedCompletionUTC >

  < / OutputParameters >

  < warning > < / warnings >

  < exceptions > < / Exceptions >

  < / response > '

  It will be better to try and parse text or try and use another method with vCO

  If you haven't done so already, take a look at the action of com.vmware.libarary.soap.processOutParameters.  It is the action that generated the log you have placed in us.  It generates an object Properties (key, value pairs) with the value for each setting that results.

  In your case, assuming that 'outProps' is the result of the above, you can use:

  var getRequestStatusResult = outProps.get ("GetRequestStatusResult");

  And to analyze the code XML with E4X as Ilian said.

• How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  How to remove the old key wifi Windows 7? It is automatically to connect to the old key... If I delete also the same old key is coming.

  Here you go:

  1. Control Panel
  2. Network and sharing Center
  3. Manage wireless networks.
  4. Right click on the wireless network unwanted.
  5. Delete

  Also note that since there is a network problem, a Forum that focuses on networking would be a better place to ask this question. This forum addresses issues of Windows security.

• How to make the top sites page appears when I open a new tab? Why have I not of "buttons" to pin a top site of the page tab?

  When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?

  Here is some additional information on the configuration of the new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:

  "3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions

  If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?

• Anyone know how to check the date of warranty until when?

  Anyone know how to check the date of warranty until when?

  https://checkcoverage.Apple.com/Jo/en/;JSESSIONID=9pJ0X9pFPJtNg3c44yDGCvk9pVpt5l QSgn4B60y4Skv1WfmnqMkF!-1840326800

• How reset you the app to drive zero when you have completed a workout?

  How reset you the app to drive zero when you have completed a workout?

  Hi Larry

  When you are ready to complete your workout, press firmly on the view > press end > turn the digital Crown to scroll the summary results > at the bottom of the summary, touch save or delete.

  More information:

  Use of the workout on your Apple Watch - Apple Support

• How to stop the red symbols to appear when I use the question mark, the apostrophe and slash keys. This only happens in my e-mail program.

  How to stop the red symbol to appear when I use the key question mark in my e-mail program.

  HI Julie Delany.

  1. for how long are you facing this problem?

  2. is there any changes made prior to this issue?

  3. may I know what mail client do you use?

  Disable the function key (lock) and then check