Cannot access anything in the Start Menu.
Original title: problems with Start Menu...
Can Hi anyone help here please... I can access is more things in my Start menu, Control Panel, My Documents. My photos, my computer etc, etc, all died in the start menu. Whenever I click to open these things I just continue to get an error report, I scanned for virus etc but the sweep came clean... Thank you... Jon T.
Oh heck - here's what I'd do:
When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension. You can also see some errors of NAT (DEP, Data Execution Prevention). DEP errors are reported when XP will be threatened by a program and XP stops threatening program. XP should never feel threatened by the Explorer Windows (or Internet Explorer) to less that some add-on is the cause.
Those who would be the Explorer extensions that do not belong to Microsoft. This means that extensions that you have added. Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.
Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).
If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected. If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.
First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem. You can have a lot of extensions not installed Microsoft don't even know you about.
Download ShellExView here to see what Explorer extensions you have loaded:
http://www.NirSoft.NET/utils/shexview.html
ShellExView does not install anything on your computer, simply of runs and displays.
After you launch ShellExView (shexview.exe double click) and acknowledge the security warning, adjust the column widths, so you can see everything clearly. Under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems, which is a difficult color to see, so click on display, choose the columns and move up or move down in the column of Microsoft is narrower upwards (Mount) so you can see on your screen without having to scroll left and right.
Click on the header of column called Microsoft to sort display (by clicking on the column heading in Microsoft) then all the non Microsoft extensions are at the top and easy to see. They will say 'No' since they are not Microsoft extensions.
Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.
You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
You can Google something like:
You must complete your suspect on behalf of adds on. See what kind of search results hits you get and are looking for solutions or situations that sound like yours. I'm not a defender of trial and error, but I can't think of another way to do...
Right click and disable the non Microsoft extensions one at a time (or maybe in small groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary. Test your failure condition. If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.
If you recognize all the extensions that have been added or recently downloaded, start with these first.
Disabling the extension does not uninstall the extension - it is just disabled. You can always enable it later, so keep track of things by writing them down.
Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again. You have disabled the last extension would be suspicious.
You can also disable all non-Microsoft extensions, restart, test your fault condition and allow them one at a time until you find the one that generates the failure condition.
If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave. When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.
The hope is that you will find extensions that is causing the problem and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.
I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.
If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.
If you find the offending extension that's the problem, please let us know what it is that I can add to my list!
Tags: Windows
Similar Questions
-
Windows Explorer restarts when I use anything in the start menu.
Restart of Explorer
Windows Explorer restarts when I use anything in the start menu. I try to change the window update settings to automatically update drivers and can not access.
Also getting BSOD constantly.
Hi Jannie762,
· You receive an error message or error code with Windows Explorer, blue screen and update the drivers?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: Try the SFC (System File Checker) scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
It would be useful for us to identify the problem, if you could upload the dump file.
How i: post a screen shot on this forum?
Let us know the results.
-
Client VPN cannot access anything at the main Site
I am sure that this problem has been resolved in a million times more, but I can't get this to work. Can someone take a look at this quick config and tell me what is the problem?
The Cisco VPN client connects without problems but I can't access anything whatsoever.
ASA Version 8.4 (4)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
switchport access vlan 15
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.43.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address a.a.a.a 255.255.255.248
!
interface Vlan15
prior to interface Vlan1
nameif IPOffice
security-level 100
IP 192.168.42.254 255.255.255.0
!
boot system Disk0: / asa844 - k8.bin
passive FTP mode
network object obj - 192.168.43.0
192.168.43.0 subnet 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the NETWORK_OBJ_10.11.12.0_24 object
10.11.12.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.43.160_28 object
subnet 192.168.43.160 255.255.255.240
network of the IPOffice object
subnet 0.0.0.0 0.0.0.0
outside_access_in list extended access permit icmp any 192.168.42.0 255.255.255.0
Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
standard access list vpn_SplitTunnel allow 192.168.43.0 255.255.255.0
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 IPOffice
IP local pool newvpnpool 10.11.12.100 - 10.11.12.150 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 649.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.11.12.0_24 NETWORK_OBJ_10.11.12.0_24 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary
NAT (IPOffice, outside) static source any any static destination NETWORK_OBJ_192.168.43.160_28 NETWORK_OBJ_192.168.43.160_28 non-proxy-arp-search to itinerary
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
network of the IPOffice object
NAT (IPOffice, outside) dynamic interface
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 b.b.b.b 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
AAA authentication LOCAL telnet console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
http 192.168.43.0 255.255.255.0 inside
http 192.168.42.0 255.255.255.0 IPOffice
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
IKEv1 crypto ipsec transform-set high - esp-3des esp-md5-hmac
crypto ipsec transform-set encrypt method 1 IKEv1 esp-3des esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto-map dynamic dynmap pfs set 30 Group1
Crypto-map dynmap 30 set transform-set ikev1 strong dynamic - a
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
map rpVPN 65535-isakmp ipsec crypto dynamic dynmap
rpVPN interface card crypto outside
crypto isakmp identity address
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 2
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.43.5 - 192.168.43.36 inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal RPVPN group policy
RPVPN group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
username admin privilege 15 encrypted password gP3lHsTOEfvj7Z3g
username password encrypted blPoPZBKFYhjYewF privilege 0 mark
type tunnel-group RPVPN remote access
attributes global-tunnel-group RPVPN
address newvpnpool pool
Group Policy - by default-RPVPN
IPSec-attributes tunnel-group RPVPN
IKEv1 pre-shared-key *.
!
!
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:b3f15dda5472d65341d7c457f2e8b2a2
: end
Well Yes, you are quite right on site!
Asymmetric routing is not supported on the firewall, such as trafficking and out should be via the interfaces of same, in the contrary case, it think it's an attack and drop the package.
Default gateway on the subnet devices IPOffice should be the interface IPOffice ASA (192.168.42.254), not the switch, if it is a switch shared with your home network. Similarly for devices inside subnet, default gateway must be ASA 192.168.43.254.
In regards to the switch, you can get a default gateway or the ASA inside or IP interface IPOffice ASA and the needs of return traffic to route through the same path
-
Cannot access anything whatsoever.
I have a pop internet security window that analysis because I don't know what and I cannot access anything in the administrator account on my computer. Also the sercurity in Panel tab won't let me not activate at all. I get an error message in the lower right pane, saying: he can not access to this. And I say mostly everything. I'm not computer, big words and whatnot may not make sense to me. Also, on my administrator account real, I have a .exe program named (6vx9p4gkqs.exe) If this is useful, who keeps constantly ask my permissions, where of course I continued to decline. It flashes permanently on the lower tab below. I don't know what other information you might need in order to help me, but please ask and I will try my best to post it to the top. Help, please.
response of ahaap is based on the assumption that you have Avast * and * another product of security installed, given that you have posted on the MSE forum. You do not specify which tool you used by Microsoft to analyze, but I guess that's the Microsoft - http://www.microsoft.com/security/scanner/en-us/default.aspx - Security Scanner that does not install. So this isn't your problem.
I'll pass your question to the Windows box of responses under the heading security, privacy, and user accounts.You will find assistance in ensuring that the detected malicious program has been completely removed and to repair the damage, which he did.-steve -
Add a program installed in the Start Menu
The Kindle for PC application appears pinned at the top of the Start Menu, but not in the menu below.
I would like to "unpin" it but want to be able to access it from the Start Menu.
The help file is no help.
Sorry, there is a misunderstanding: you can put a program in the menu all programs. I thought that you wanted to put in the box above that.
If you want to put in the menu all programs, here's how:
- Click all programs and choose open
- Drag the icon into the folder that appears (as you say, it's like Windows 95/98)
It should put there when the program is installed, but the Setup program takes this decision, some programs do not, others give the user a choice.
For email alerts, can you check your profile page (here) and see if there is e-mail address listed correctly?
-
Cannot access the Start Menu - 6 Ultra
I realize there are other threads on this problem but mine is a little diiferent.
I just replaced memory in both my Ultra 6 s. The steps were:
Ultra unit has
Deletion of records
New memory installed
A run the memory test (past)
Replacement discs
Fact
Ultra B
Deletion of records
New memory installed
Could not access the Start Menu to run a memory test.
Shared memory of unit A and B of the unit (with 'good' memory)
Could not access the Boot Menu
Blank placed in drive B and turned on.
Could not access the Boot Menu
Disk spent
Has started doing a factory reset to unit B
I pulled the plug when I saw "pending RAIDar.
So it seems to B unit works fine except that I can't access the Start Menu.
I guess that the reset button does not work on Unit B or is it possibly caused by something else?
Here is my MAIN question:
What should I expect when I put the original disks to unit B?
I noticed that Studio B was assigned to a new IP address, so I'm a little unsure of what to expect.
Ah, that could be just a bad reset button.
-
Cannot access Internet and all programs on the start menu. How to get rid of a virus on windows xp
I was recently given a hand computer (compaq I tthink) so I'm not clear about all the fancy stuff to the extent of the ect CPU... but I know it has windows xp pro. in any case, a friend used my computer and for some reason any felt the need to download a program called 7-zip. Now, my computer is screwed... In the start menu > all programs, everything has disappeared! And I can access the system restore in normal boot and safe mode, but the window remains empty, we never really gave me the opportunity to use it. Oh and I can't get online in normal or safe boot mod either, what can I do?
Original title: how to get rid of a virus on windows xp proremove a virus from windows xp pro
Hello
1. Why do you think that the computer is infected with the virus? See you pop - unwanted ups or odd behavior of all programs?
2 have you made any changes to the computer before the show?
3. did you run any online scanners to remove infections?
4. What is the antivirus installed on the computer program?
Method 1: Run a scan antivirus on your computer.
www.Microsoft.com/Security/Scanner
Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
Method 2: Safe mode with networking
Step 1: Check if you can browse the Internet with success in Mode safe mode with networking.
Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.
A description of the options to start in Windows XP Mode
Step 2: Put the computer in a State of boot is a way to know which application is causing this problem.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
Step 1: Follow the steps in the link below to do the same thing:
How to configure Windows XP to start in a "clean boot" State
Note: After troubleshooting, be sure to set the computer to start as usual as shown here:
Step 2: To configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
- Click Start and then click Run.
- Type msconfig and click OK. The System Configuration Utility dialog box appears.
- Click the general tab, click Normal Startup - load all services and device drivers and then click OK.
- When you are prompted, click on restart to restart the computer.
Method 3:
Create a new user account and verify if you are able to access the program in the start menu.
Try to connect with a different user has administrator rights account and then create a new user account.
For more information, see these links:
How to create and configure user accounts in Windows XP
How to copy data from a corrupted to a new profile in Windows XP user profile
I hope this helps.
-
I just applied SP1. Until I applied this update that everything worked as I expected.
Since then, whenever I type anything in the search on the start menu, there is no result. The only exception to this is that if I type in a full path, for example "C:\Program Files\", how I get a list of files in that directory. If I type in everything that is not a path, as for example the letter p or the word 'paint', told me that "no element not corresponding to your research."If I click 'more results', I get an error with a big red x box. The legend is "search query: = paint", for example if I searched for painting. The text is "Windows cannot find ': search query = painting '.» Make sure you typed the name correctly and then try again. "I wasn't expecting this error box, but rather a window with a list of search results.I have downloaded and run the troubleshooter of research - Mats_Run.search.exe. It tells me that no errors have been detected and gave me the option to reset the search. I did this, then waited a whole day to search for re - index, but the results are the same.In addition, after reading a few other questions on the microsoft Web site, I've done different things which seem to as they should not work - I have turned me folder, active random registry settings options, etc.. Indeed, none of these things had an impact or shows something unusual.Also, I can access is no longer my home directory from the start menu. If I click on my user name that appears in the upper right corner of the menu start, the start menu closes and nothing happens.There are a few other circumstances where I can't reach my directory. For example, if I have an Explorer pointed toward a library, say "Downloads", if I click on my user name in the breadcrumb path, he will remain in the directory downloads instead of going to my home folder, as I expect. Also, if I click on my user name in the Favorites list in the left pane of the Explorer, I would expect the Explorer window to access my home folder. Instead, he remains in the folder where he currently resides.As I said earlier, before applying the update it worked as expected.Thanks a lot for your time!Hello
Turn off or uncheck search in Windows Control Panel and restart the computer.
After the computer restarts, place a check for Windows Search and restart the computer. Then find the issue.
Reference: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-offAlso please take a look at the article that could help you.
The box "search programs and files" does not correctly display the search results in Windows 7 and Windows 2008 R2
http://support.Microsoft.com/kb/977380 -
IN THE START MENU RECEIVE MESSAGE C:/ACCESS DENIED
original title: IN THE START MENU / MY COMPUTERI now RECEIVE THE MESSAGE C:/ACCESS DENIED, SOULIGNANT WHAT the DR C. RT. CLK. ING AND PROPERTIES OF OPENING SHOWS DR. NOW COMPLETELY FULL? ALSO MY "D" DR. RESTORATION. APPEARS A MESS. SAYING DR.IS ALMOST OUT OF MEM.
MY RECENT EDITS HAVE BEEN INSTALLING MICRO. ESSENTIALS seconds AHEAD of REMOVE ALL MY OTHER s .i SOFTWARE (AVIRA SECURITY, ADAWARE ANDA PRE-INSTALLED NORTON ANTIVIRUS VERSION) DOWNLOAD E-MULE (a PROG. FOR OTHER FILMS OF OTHERS). ALL PRΘCΘDENTES S CAME BACK CLEAN AND MY PROG "SECUNIA" SOFTWARE/SYSTEM CHECK SHOWED MY COMPUTER @ OPUS 99% EFFICIENCY. TRY NOW 2 UPDATE MY PROGRAMS WON'T HAPPEN AGAIN, MY MOUSE POINTER IS FREEZING AT RANDOM, IM COULD PROBABLY THINK OF MORE, BUT... ANY IDEAS P.S. HE WOULDN'T LET ME NOT REFORMAT MY DRIVE C EITHER!
Uninstall everything except an antivirus/security program - runninng several versions (even just have installled) can cause all sorts of problems such as freezes, crashes, corruption and other things. Once done, see if the system works better. Don't forget, most AV programs require a special and just removal tool cannot be uninstalled as other programs (or it does not work and leaves behind the remains that are causing problems).Let's see if that helps.Good luck!Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to access the start menu? F10 is ignored. ESC is ignored.
I have a HPE175z running a new installation of Windows 7 Home Premium. I want to change the startup parameters. When the system boots, the screen tells me that < F10 > give me access to the configuration. F10 is completely ignored. A message tells me later < ESC > will give me access to the Start Menu. < ESC > is also ignored. Similarly, I have try all the keys are ignored - nothing interrupts the boot sequence. How can I access the start menu?
The problem is that no key during the boot stopped the boot process and allowing me to enter the installation or startup configuration. I swapped keyboards and the problem disappeared. Apparently, the keyboard did not have during the boot sequence.
Thanks to all those who had a suggestion.
-
Cannot restore my laptop-"Repair my computer" not appearing is not in the start menu
Once or twice in the past had to get my phone and it was an easy process thanks to the construction recovery option (computer repair) in the start menu (when you press F8 on the Toshiba screen), but now when I press F8 during the Toshiba screen and go to the boot options, there is no option to fix my computer. Fix my computer is usually the first option, but the first option is now "Start Windows in safe mode". Fix my computer disappeared! :(
I think that the cause of my problem is that I started my laptop using my friend's windows startup disk when my computer would not start a month back. In fact, he got my laptop going again, but after starting my laptop, he told me that there is a problem with the start and he asked if I would like to repair and restart, I did. In addition, the windows startup disk, I used to start my laptop computer is a 64-bit version and my laptop has a 32-bit operating system. I don't know if that makes a difference.
Could someone please help me by letting me know if there is anything I can do to get "Repair my computer" back. It is handy recover my computer when I want to just go back and get my laptop clocked in so it is better again.
Short answer:
There is nothing you can do about it except to include adjustments to plant again. I'm sorry. :( -
ReadyNAS Duo v2 impossible to access the start menu
Hello
I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.
So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(
I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.
Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)
Thanks for your help!
Hi lakano,.
Welcome to the community!
Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.
Kind regards
BrianL
NETGEAR community team -
Cannot remove a program from the start menu icon
Original title: icons in the Start Menu;. Cannot delete the program start menu icon to remove/uninstall, need help?
S pie Menu icons; Ghost of icons
I deleted a program and uninstalled completely, but the program icon always appears in the start menu. I was not able to remove the icon. Right-clicking on the icon simply freezes the start menu for several minutes. I was able to remove from the desktop.
I tried the Program Data > Microsoft > Windows > Start Menu > programs > but the icon.
I had this problem before, but I just do not remember how I fixed it. Any help would be appreciated.
Hi Kevin, thanks for responding.
The program was the Vuze, and I managed to get rid of the icon. By a right click and do not move the mouse and wait 5 minutes eventualy box popped up and I was able to remove the icon from the start menu.
The solution was a lot of patience.
Please help us well!
:)p.s. I ran various software cleaning, like glary utilities, ccleaner and reboot several times.
-
The left panel of the start menu icons cannot be removed (when I press "remove from this list" nothing happens) and arrows (see illustration) do not work, that nothing is displayed - please help!
Try https://support2.microsoft.com/mats/system_maintenance_for_windows/
If this doesn't help not try to reset the start menu by default:
Right-click on the Start button and click on properties.
Click the Start Menu tab, and then click Customize.
In the Customize Start Menu dialog box, click on use settings by default, click OK, and then click OK again.
-
I recently downloaded Secure browser review for a test in Spanish for a class. I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu. Finally, before taking the test, my computer is always locked. This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock. Now, it does not require a password, or it is not locked.
I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return. Help, please!
Original title: Secure Browser review
Hello
Do a system restore, if necessary in Safe Mode, until you have installed the browser...
"In Windows 7 system restore:
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
'Advanced options boot (including safe mode).
"The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"
See you soon.
Maybe you are looking for
-
Incorrect display of web pages
This is a problem not intentionally that comes and goes. I think it might be related to updates that are hunted. On my boxes linux (Xubuntu 12.04 with all the updates and patches), Firefox suddenly starts displaying all the pages as text only. I rebo
-
JPEG files on Web sites are coming up with a yellow cast. Someone else?
Example to Picasa
-
MS UAA Bus Driver for HD Audio with WSC03-7LH error code
My Lenovo T61 in turn do not load the HD Audion MS UAA Bus driver and give the 7LH WSC03 error code. XP. This has happened forever and I just restart and usually charge of the dll.
-
Live Mail hung up sending messages
I have two messages hung in the OUTPUT area. All I see is the status area that says 'Send 2 messages' and 'run '. I can't delete these messages and I can't access any other part of the Live Mail now. There is no error message shown in the "Errors" ta
-
Read-only - user files - can't change for write access
In the users (only one user) section all the folders are read-only. I'm moving to the music in my music file, but it won't let me. I get an error indicating that this action requires administrator rights, the diolgue box Monte 'do you want to get per