How to monitor a transaction that is rollback

Similar Questions

• How do the entire transaction rollback

  Hi friendz,.

  Please help me...

  I use JDEV 11.1.2.2.0 version.

  My problem is the following,

  My jsf page has a button, he calls three procedures

  (when this key 3 operations took place).

  If one of these three procedures contains an error,

  any transaction must be rollback.

  How can I do that.

  Regardz,

  -Rude-

  Hello

  The button calls three procedures, so you do not commit at the end of each procedure, all changes must be waiting and be able to roll back. If the validation of procedures however then it is no easy way to roll it back in case of error. In this case, remove him is committed and commit at the end of 3 calls (for example, the button might be called commit). As an implementation, I suggest to expose a method on the business service that calls the button. the method of business service then performs the procedure calls

  Frank

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• How to cancel a transaction pending have not

  How to cancel a transaction pending that I did not.

  Help here > How to report a problem with iTunes Store, App Store, Mac App Store, and iBooks Store buy

• Qosmio G40 - how to monitor audio input?

  I installed Adobe Audition on my Qosmio G40 but were unable to control sound input or get audition to record. (It used to work fine on my xp pc) I was able to record sounds, but he can't listen to as his '' go. '' I also tried to install an external sound card: CREATIVE EXTIGY but can't get the laptop to recognize that it is installed.

  EXTIGY can work with my laptop?

  How to monitor input sound?

  His card is Realtek

  Advice welcome.
  Sean.

  Hello

  Have you checked the Realtek HD Audio Manager in the control panel?
  To do this.

  On the right, you will find the analog ports, internal speakers and mic and digital.

  Unfortunately, I m not a Qosmio G40 owner but I have a Satellite phone with Realtek audio chip and in my case the audio HD Manager provides some settings that can be changed.

  Must check and play with it.

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• How can I be sure that if I write a frame on the bus with success?

  Hello

  I use XNET to write and read the structure. I wonder how can I be sure that the writing frame on the bus is successful? I mean without using the XNET-monitor or something. Are there any screws or propertynode to set after the XNET Write.vi to let me know if I really write an image in the bus or not?

  THX.

  It's been a while since I looked, but I vaguely remember that (at least with the C of FPGA OR-CAN-modules of the series) there is a function/method/configuration setting that allows to configure the module echo all the (or just the error frames) sent executives to the side of the reception.

  Also, I think you're supposed to be able to assume that if you get an error when writing, she has been sent successfully. (But even I'm not convinced...)

• How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  How to monitor the TX and RX on PERFORMANCE for virtual network adapter BASP monitor?

  I have a virtual network adapter that is created with Broadcom.

  This virtual interface named "BASP eCard" visible on the performance monitor in the category 'Rhythm Pipe' but not in the category "Network Interface".

  This is problematic because the Tx and Rx (bytes received/send in second) is available in "Network Interface" that show physical network cards only.

  Someone has an idea?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How many monitors can be connected with GTX750 Ti video card

  Original title: connection

  How many monitors can be connected with GTX750 Ti video card

  Request of NVIDIA or the manufacturer of the card.

  IF it is the card you need the info- http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-750-ti/specifications

  But it seems that some do support 3 - http://www.evga.com/Products/Specs/GPU.aspx?pn=70B14BA6-5853-4A65-AACF-CFF61F466D82

  So check with the real manufacturer of the card you are interested in.

• How to monitor the status of the application - REST

  Hi all

  I was following the blog using vCAC 6.X REST API - Part 2 - elastic sky to request a REST. I was able to post the request. It returns the response immediately after the successful presentation.   How to monitor demand? "The response of the application object has assigned to the header 'rental' property https:// < < hostname > > /catalog-service/api/consumer/requests/56428808-f9a0-4bac-b83d-ce75ddc86b78 '.

  I tried to use URLs of 'place' that didn't work.

  var requsetRest = vcacHost.createRestClient (vCACCAFEServicesEnum.CATALOG_SERVICE);

  var response = requsetRest.get ("consumer/applications/56428808-f9a0-4bac-b83d-ce75ddc86b78");

  
  

  Any help appreciated.

  
  

  Thank you
  

  I was able to get the application to the vcaccafeenitiesfinder.getCatalogItemRequest method.

• Physical disk: how to monitor.

  Hello

  I use Dell servers, three of them, with by hcl

  -perc h200 hba

  -200 GB SSD used mixed SAS (OEM folding/Sandisk lightning LB206M)

  Now, I have a disk group of unhealthy status caused by a SSD drive in 'permanent drive failure. I understand that replace the drive I lose the disk group.

  My question is how to monitor the status of having an advance warning and, in case, how to test the device failure.

  Thanks for any suggestions,

  Joshua

  Joshua

  As I suspected, your SSD there not all the INTELLIGENT features reported outside the current temperature and the number of read/write errors, but no thresholds, now this means two things

  1. the player does not support these SMART features

  2. the implementation of the features is not the standard method of INTELLIGENT integration

  It would be a question for Dell take their engineering products and for them, in order to participate with SanDisk, I think always that it's odd that SanDisk took that model certified but Dell have

  So with this drive, it would take before that VSAN knows that something is wrong.  At least now you know now

  Simon

• How to monitor the use of the Hyperion applications

  Hi all
  We have developed a classical Planning Application in Hyperion 11.1.2
  The application is running in production mode, and now we want to monitor the use of this application, in this regard, I have following questions:
  (1) how to activate the newspapers?
  (2) how to monitor the time of connection and disconnection of each user
  (3) how to check the amount of data entered in a particular week
  (4) how to check that data are entered against how much the faculty members?

  I won't pretend to know what should I know about this subject, but I get this question of a large number of customers. So, here is my answer. There is no right way to monitor who logs and how many times they connect. If you enable the audit DATA, that you can do is to see when a user loads the data and how often they do. This does not match the connection, but planners usually don't connect to display data (which are normally made in EN or SmartView), they connect to load/update of data. With active audit DATA, you can query the HSP_AUDIT_RECORDS table, which is where the audit is stored, and see how many times the user load the data and the last load of data. Is not correct, but it is far more closely than any other method I've found.

  Example of the last connection (really last loaded data)
  SELECT USER_NAME AS 'User', time_posted as 'Last Login Time' OF HSP_AUDIT_RECORDS WHERE TYPE = "data";

  You can use a similar query to count the number of data loads.

  This would also show you what the user has launched it to business rules.

  Another option would be to enable SSAUDIT on the planning application in Essbase (this is done in the Essbase - google SSAUDIT server configuration file). This will create 2 files. The first is a file index or pointer. There will be a line for each record, via a web form or SmarView load. The second file contains all of the loaded data. The first file will tell you that loaded which lines in the second file and what time he did. The downside is that each connection between planning and Essbase uses the ID of the source of data for planning. So, it always shows the same loading data ID and will not be the real of the user who did it.

  Note that users do not have to connect through planning. They can directly connect to Essbase. All financial reports that would be misunderstood by looking only at the planning.

  If you really want the actual load, you really watch the Essbase and Essbase application log files. Would not show you users, but could show you the number of queries, the data loads, etc. You could analyze these logs in a relational table for quick access to the use of the query.

  That's a lot of things to take. Unfortunately, to answer your question, it is not a quick option, "click here."

  Utility to analyze the logs can be found at http://code.google.com/p/jrightlog.

  ------------
  Kyle Goodfriend
  http://www.in2hyperion.com

  Please be sure to assign the post as answered and answers as response or useful if others can benefit from your experience.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• How to start an iMac that keeps locking down to halfway through to start?

  How to start an iMac that keeps locking down to halfway through to start?

  What is your most former showing Mac in your profile? Or a new brand?

  Head to your nearest Genius Bar are a great way to solve these questions - I suggest you make an appointment. the diagnosis is free. If this is a new Mac, take advantage of your guarantee and contact Apple technical support.

• How can I tell Firefox that a website is correct

  I use this site all the time and now Firefox gives me a connection on the certifacate error and doesn't let me go. How can I tell Firefox that the site is correct. Its my companys website.

  Did you change the SSL certificate? Maybe the certificate has expired. Just press 'Add the Exception' and continue to access your website in any case.