How to open backups stored on computer

Similar Questions

• How to open PDF stored as blob

  Hello
  
  How to open PDF that is stored in the BLOB under Forms 10 g database. Any method to directly open the PDF file instead of generating physical PDF file have and open in the client webutil.showdocument.
  
  Thanks in advance

  If you use webutil functions, you can have a look here:

  http://SheikYerbouti.developpez.com/webutil-docs/Webutil_store_edit_docs.htm

  I use it to store what I need in a table: I tested with file .doc, .jpg files as well as .pdf files.
  Hope it helps you,
  Fabrizio

  If this answer is useful or appropriate, please mark. Thank you.

• How to open PDF stored on the desktop

  Why FF refuses to open a PDF file that is stored on a PC?

  Thank you very, very much for your help and your patience!

  I started FF with a second profile and now I can open PDFs in firefox eeseaaallyyy - what a relief. I don't know which setting is wrong with my FF profile primary, but I it will rebuild and then things should be good - thank you again for your help and your patience with a dilettante technique...

  Now have solved this issue:

  Why the FF search feature isn't able to access PDF files from outside the application PDF? If anyone program interface and to make this feature available, this would create FF apart from other browsers, many more millions of miles... at least for me as a translator and researcher.

  What should be done?

  I hope someone is inspired to make a reality.

  Thanks again and good night!

• How to open files of .tk3 follow-up

  Can someone tell me how to open .tk3?  My computer does not recognize it and wants to know with what I want to open the file with (software adobe reader, microsoft word etc.)

  Thank you

  Ronda

  Hello Rondava,

  In order to open the TK3 files, the user must install the TK3 Reader software.

  
  You can try to download the software here.

• How to open .wim file after backup in Windows 8?

  How to open .wim file after backup in Windows 8?   The files were backed up on an external hard drive in the form of .wim files before the 'crash' and 8 re-installed windows.   Now, I can not restore files.   The computer does not recognize the external hard drive when I try to restore through troubleshooting > adv options > System Image recovery.

  Hello

  Same as Windows 7:

  http://support.HP.com/us-en/document/c03056985

  Kind regards.

• How do I partition my drive so I can create a full backup of my computer?

  My hard drive with windows 7 appears in disk management with 3 partitions. One is the system partition labeled C: healthy (System, boot, pagefile, Active, Crash Dump, primary Partition) and the other 2 say-healthy (recovery Partition) 1.46 GB and healthy (Primary Partition) 6.36 GB. The other 2 are shown as 100% free. Can I remove these or at least the other primary partition so I can use the space? I want to create a partition where I can make a full backup of my computer so I can restore to the current state.  Any help on how to do this? I'm not at all familiar with the help of disk management. I guess I can delete the system partition, and then the 6.36 GB will be automatically added to the first primary partition, or it would show as unallocated, then I have to shrink the first primary partition and merge sort the free space of the 2 partitions to create 1 partition backup. But I have never done this so I don't know exactly what to do.

  I also have an external hard drive 2 TB USB with 1 primary partition. I would like to back up on that as well (I guess I should also create a separate partition for this.). Ideally, I would like to have my computer Setup, so when it starts up I have the ability to restore. And I guess just that this would require backup on a separate partition.

  I have two Windows 7 with the backup and restoration of facilities as well as Acronis True Image Home 2011.

  Any advice much appreciated

  Thanks, Mike

  Save your files or your partitions in a free partition on the internal drive is a waste of time. Doing so offers no protection against the most common such as woes

  • Flight
  • Water damage or fire
  • Physical damage (dropping out of the machine)
  • Hard drive crash
  • File system corruption (e.g. damaged partition table)
  • User error (for example of formatted the wrong partition)

  A decent backup plan is based on the backup media being kept well away from the PC for most of the time.

  Note also that expand them or shrink partitions is equivalent to open heart surgery. Make sure you have your important stuff saved beforehand. You should also check if the saved controls is actually readable.

• How can I recover my backup disks backup after a computer crash? My HP laptop is a CMS (Windows7)

  So, recently, I had to "reset" my computer to its factory settings and I for her backup disks but when I put them in, the only options that appears is 'open folder to view files '. When I open the folder, there is another folder called "backup files", when I opened that there are files that say 0.wim, 1.wim, 2.wim, (or something similar when same) and so on. I click on and it just say "choose the program you want to use to open this file" or "Browse programs." You can also choose to watch online for a program and I did and I downloaded one that he said would work (7 - Zip). I also learned what a WIM file. I have very important documents, photos and music on my backup DVD. If anyone would know how to recover my backup on my computer, please let me know and if there are questions about the problem at hand, ask and I will do my best to respond. Thank you for your help!

  On one of the drives, probably the first one, there was also a file with the .exe extension. Restore.exe or Recover.exe. If you find it double click to run it and it will extract the aDossier on the laptop .wim files.

• How to open applications that I have in iTunes that are from sources other than my Mac Mini computer as my iPad and iPhone?

  How I open my apps on iTunes that I got here from other sources such as the iPad or my iPhone?  I downloaded them on my Apple Mac Mini computer on the iTunes apps page, but can't seem to open an any of them?  Thanks for your help!

  iOS (with the exception of those that you created) applications cannot be run on a computer.

  (143863)

• How to open the Pavilion g6-2210us laptop computer to install RAM?

  I have a HP Pavilion g6-2210us laptop PC running Windows 8.  He came with the bar of 1 to 4 GB memory and has a foul slot up to 4 GB of RAM.  I bought another 4 GB module and intended to install today, but I don't know how to open the bottom of the computer to install the RAM.

  I have a Compaq laptop that was new in July 2007 and he has a sign on the bottom that covers the compartment memory and a separate panel that covers the hard drive.  Each of these panels can be removed by loosening a few screws and pulling the top of the Panel.

  But with this new HP Pavillion-2210us g6, I see a big sign which applies to sites of memory and hard drive.  And there is only one screw.  Everything simply loosen this screw does not allow the Panel to be raised.  So I suspect the slides Panel stop someway.   Can someone explain how the Panel is removed?

  Hello

  See Page 49 of your & Maintenance Guide.

  Kind regards

  DP - K

• How can I fix the error 216 evrytime I open internet or my computer the error popup

  How can I fix the error 216 evrytime I open internet or my computer the error popup

  How can I fix the error 216 evrytime I open internet or my computer the error popup

  Try here

  http://support.Microsoft.com/kb/259279

• When I double click c:\ icon in my computer, it always invites me to choose a program to open it. How to open the icon c:\ automatically bypassing the prompt to choose a suitable software?

  When I double click c:\ icon in my computer, it always invites me to choose a program to open it.
  How to open the icon c:\ automatically bypassing the prompt to choose a suitable software?

  Rxtr,

  Welcome to the Microsoft Answers community. Some people have found a solution in the steps described in the disk opens on double-clicktroubleshooting.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I stop all of my videos host being stored in a dll file and how to open the items already stored in the same

  WHEN YOU IMPORT MY VIDEOS THE SYSTEM FILES IN ONE DLL FILE FORMAT, HOW CAN I AVOID THS IN THE FUTURE AND WHERE THE

  I FIND THIS FILE IN MY COMPUTER AND HOW EVEN OPEN. MY COMPUTER IS RUNNING WINDOWS VISTA HOME PREMIUM SERVICE

  PACK 2. THANKS FOR YOUR HELP IN THIS ISSUE YOUR FORECAST AND BEST WISHES, ALAN.

  What is the brand and model of the camera?

  How_exactly_are to import you video files?

• How to use the full Windows Vista Edition backup utility to create a backup of the computer of my computer on a network drive?

  I can read and write in my Win7 computer I'm currently configured to run any server at home, I can watch TV, store files and folders individual, to create, remove, in other words all I can do on this machine, I can do. 3. to disks are mapped to this machine and show as readers y and z.

  I had no problem establishing actions and everything seems to work.

  However, when I try to do a full backup of a computer with network drives they don't show in the drive selection drop-down list in the center of complete backup of Windows. Arises in each drive on this machine, not the target readers when they are listed in my computer and do show and reconnect when I reboot the machines.

  Any suggestion would be appreciated.

  Thank you:

  Don

  Hi Don,

  You can follow these methods & check if it helps.

  Method 1

  You can cancel the drive mapping & check if readers appear in the Windows complete PC Backup Center.

  Disconnect your computer from a network or network drive

  Reference: back up your programs, files and settings of the system,

  Method 2

  In addition, you can also follow the suggestion of TexRyker on Wednesday, February 28, 2007 18:07 from this link.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/f545e8ae-46fc-4BEE-bfd8-be1fe1151e04/

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward, and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  on windows 7 starter edition how can I open an admin account, I have a standart account and I couldn't open any software on computer please help me.even change user account cannot be opened.

  Hi kuentin,.

  Welcome to the Microsoft Answers site!

  (1) - what do you mean you have only 1 user account?

  When you set up Windows, you will need to create a user account. This account is an administrator account to allow you to set up your computer and install any programs that you want to use. And that's why the user account you are using is the administrator account.

  There is no way that you can create an administrator account, or by using a Standard account.

  (2) are you having issues during installation of the software or opening it?

  (3) what exactly happens when you try to open the software application?

  (4) should be codes error or error messages, if any?

  (5) what software are you trying to install or open?

  I suggest you go to the link below and read for more information on user accounts.

  http://Windows.Microsoft.com/en-us/Windows7/user-accounts-frequently-asked-questions

  Get back to us with more information and try out us and help you better with the same.

  Concerning
  Varun j: Microsoft Support
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.