How to order a tree with the help of another column?

Similar Questions

• How to declare global variables with the help of another global variable in ODI

  I declare a variable gloabal using another global variable.
  Suppose for example that:
  
  I have a global variable empid.
  I'm decalaring an another global variable empname refreshing the global variables tab and select statement is
  
  Select empname emp where empno = #GLOBAL .empid - if I write like this I get the error message like character not valid.
  
  Select empname emp where empno = ' #GLOBAL.empid '-if I write like this I get the error message in the number not valid.
  
  I kept the datatype as digital and non-persistent action
  
  Help, please
  
  Thank you in advance.

  Hello

  You must perform this operation from a package.

  V1 (COOLING MODE) - OK---> V2 (REFRESH MODE)

  Thank you
  Fati

• With the help of inplace column number of the column name in the SQL Select statement

  Is it possible to execute instructions select sql with the number of columns in
  place names of columns?
  
  Run SQL

  select AddressId,Name,City from Address

  Is it possible

  select 1,2,5 from Address

  Thanks in advance

  You can extract the names of the columns for user_tab_columns
  with

  SELECT Column_name
  FROM user_tab_columns
  where table_name = 'MY_TABLE'
  and Column_id in (1,2,5)
  

  Use dynamic SQL and then the result to get the values.

  But as others already mentioned, this wil it be given incorrect if your table is changed.

• How or maximum RAM can with the help of my motherboard?

  I just want to ask how good/maximum can RAM my motherboard support?

  PRODUCT NAME: HP 14 Notebook PC
  PRODUCT NUMBER: F9Z50PAhash characterUUF

  Tip: Hewlett-Packard 21BB 39,15
  Serial number: [personal information]
  The bus clock: 100 MHz
  UEFI: Insyde F.0E 24/02/2014

  Hello

  You taken unit supported up to 16 GB of RAM.

  Check page # 2 for how it supports and page no. 54 for part numbers.

  http://h10032.www1.HP.com/CTG/manual/c04018268.PDF

• Disk Defragmenter displays "Disk Defragmenter was planned with the help of another program." ScheduledDefrag task: The task image is damaged or has been tampered

  When you try to start Disk Defragmenter, a popup appears;  "Disk Defragmenter has been set with a different program.

  Disk Defragmenter is currently using customized settings created by another program. Before you change the schedule, you should remove the custom settings. "with two selections: 'Delete settings' and 'Cancel '.  By selecting a choice does not produce no result except in order to reproduce the same popup when attempting again to start the Defragmenter

  There are several reasons why the built-in function may not work. Here are a few simple repairs:

  0. it is malware on the system. Solution: Run an AV Control and also a spyware check.

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution: Open "My computer" and right-click on the drive you want to defragment. Select 'Properties' and click on the 'Tools' tab, select 'Check now' to check the drive for errors. Select the two options, and then click Start (it may take a long time and can restart the PC so that it can do the check at boot time).

  3 Disk Defragmenter may be damaged, requiring a restore. Solution: Open System Restore and restore to a point before you start having problems with Disk Defragmenter.

  4. Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  5. There are other programs that run the Defragmenter interruption integrated. Solution: Close all running programs. If you think that there may be some running in the background, use Ctrl + Alt + Delete, and then select "start Task Manager". Under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  6. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  7. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with her and stalking the interference can not be easy (Note: some versions of Win 7 do not allow the built-in defrag utility is running in safe mode.) If your does not, let's say that defrag is disabled mode safe.)

  You should consider to download a free trial of a commercial defragmentation tool.

  Here is a link to a Top 10 reviews of the best defrag programs side-by-side comparison:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/

  You can click on the product and it will give you details on its performance, features, how he did on the exam, etc.

  Top Placer will automatically Defrag in the background and the gold medal prevents fragmentation before it happens and can instantly defragment the fragments of leaves who eats to get.

  Most of the programs featured offers free trials so you can try them and see what they do for you.

  Good luck!

  PS: There are more radical actions to repair you can do. These generally handle most situations, but if not let me know and I'll post the other options as well.

• What should I do when I receive the message that Disk Defragmenter has been programmed with the help of another program?

  I use the 64-bit version of Windows 7, 1.3 terabytes on my hard drive free and have a very slow computer. When I checked the Task Scheduler, it shows that the Defragmenter should start every Wednesday at 01:00 and the last time he had run was 12/10/2011.

  I would like step by step, answers I can get, as I'm not all that good on the computer. Thank you.

  Solution...

  Reset the calendar... to run every DAY.

  This will be as EFFECTIVE as running the DEFRAGMENTATION program in...  AUTOMATIC mode...

  Or, (mostly) running in the background, think about it, you are the one who has a TERABYTE of hard drive... to defragment?

  The Defrag program defragments only the AMOUNT of hard drive FILLED, in any case.

  I throw my computer this way, ETM, it works very well, indeed.

  And I did that 2 x 250 GB disks hard.

  XP, on one.

  Windows 7, on the other.

  What about your computer being SLOW, LEARN 'How - to' clean UP the cache of COOKIES.

  On a DAILY BASIS, too!

  UOI can use a UTILITY program... to do this and make things easier for you. .

  Many say "do not use these programs. You have trouble if you do. »

  These are professional computer repair people, who want TO "your business and they may not have IF you use these utility programs that fix your computer.»

  (Without "aid", that is!)

  I used Glary Utilities program... for years.

  It works vvery wel. For me!

  Nest part about this, if you FORGOT to clean the 'cookies', this program will do for you IF you set up right.

  That IS, to set up the section of Maintenance with a SINGLE CLICK, he always appears FIRST time run successfully, where each segment is CHECKED.

  And you RUN it... until no. PROBLEMS appear.

  As I said... I usung this program for years and my computer runs as smooth as silk.

  Seeing that the way you run a 64-bit operating system... I WOULD add more RAM for your computer.

  I would say that you may be using ONLY 2 GiG of RAM, a 64 bit OS that is not enough.

  4 GB will work OK, that makes 8 GIg in a Kick butt machine.

  Some time in the task of upgrade, an upgrade of... graphic .the CERTAINLY won't hurt, either.

  He'll be fine, with this terabyte hard drive you are using.

  Now, it will be that a machine might want.

  I use a 322-bit OS, but this drive hard terabyte THEN is on my list of "improvements".

  Like 2 of them.

• How to move a table (with the UDT as a column) to a different schema

  I have a table that has a column of user-defined type. There is a requirement to an another schema of this table as well as the UDT. I tried to create the table as, the problem is that it uses the DFU of the original schema. Is there a way to do this?

  Ex:

  User 1:

  CREATE TYPE employee_t AS OBJECT

  (employee_id NUMBER

  , employee_name VARCHAR2 (30)

  Number of salary

  dept_id NUMBER);

  Department of CREATE TABLE

  (emp employee_t

  , Bishop varchar2 (40)

  number of dept_id

  (, dept_name varchar2 (30));

  In the example above, department table has a column called emp that is UDT.

  Now on User2, if I do the following

  Create service table in select * from user1.department. Table will be created as follows. In fact I want EMPLOYEE_T also to be moved to User2.

  Name                                      Null?    Type

  ----------------------------------------- -------- ----------------------------

  EMP                                                USER1. EMPLOYEE_T

  BISHOP VARCHAR2 (40)

  NUMBER OF DEPT_ID

  DEPT_NAME VARCHAR2 (30)

  You can use expdp and impdp - but you must include the type explicitly in your dump command, since it isn't included automatically: http://dbaharrison.blogspot.de/2013/05/expdp-of-just-table-and-type-dependents.html.

• With the help of another script editor-possible?

  Is this possible in LS? There is an option for this in Acrobat. I was wondering.

  Graham

  Not at the moment.

  Paul

• With the help of the stationary state how can w/XP, I enable Spanish keyboard for the user?

  My daughter has a Spanish class this is why we have installed a panel of Spanish key for that topic.  I loaded Microsoft steady state to control what she uses, changes, etc... make his story on the computer.  With the help of most all the restrictions that she does not see its Spanish keyboard.  How to activate the Spanish keyboard while steady state is to limit what she can get.  We want only that she go to his school work, loaded on the hard disk and not much more.  The Spanish keyboard is essential for this class.

  Microsoft SteadyState has been abandoned and is no longer supported.

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  How (if possible) I point out a whole day in the Windows calendar instead of just a single event? (With the help of Vista Ultimate) Thank you.

  I have no experience with Windows Calendar, but see this article for a bit of luck:

  Customize Windows Calendar
  http://Windows.Microsoft.com/en-us/Windows-Vista/customize-Windows-Calendar

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• How to create the ISO image of windows 8 with the help of boot, efi, sources, and support files

  Hello
  I followed folders in my USB key:

  Boot
  EFI
  Sources
  Support,

  and the following files:

  Setup
  Bootmgr.EFI
  Bootmgr

  How can I create an ISO image of windows 8 with the help of these files and folders. I even installed ADK, but I couldn't keep up with it.
  I would be very grateful if someone could help me out here.

  Secondly, I would also like to know how to create a system image of WINDOWS 8, where the hard drive breaks down.

  Concerning
  MAK

  If you have the upgrade key, go here

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can go for the use of win8 / win7 / vista to match highlights you want - and download the win8 installation and run the installation with your key to download you need to install windows from that.  Will allow you to have an iso bootable.

  Make a picture of the control panel system / Windows 7 file recovery / system Image.  I certainly wouldn't put it on dvd.  It will be too.   Find an old preference portable hard drive and buy a $ 20 usb box, get an external hard drive.

• All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  All my objects in Indesign are locked. I can move objects with the help of the arrow keys on my keyboard, but not with the mouse. I must have done an order by mistake. Any suggestions?

  Thanks for your help. I work again InDesign brokedown and after a reboot, everything works perfectly fine.

• I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  I have customized a widget and want to reuse on another page. How save, copy or reproduce them? With the help of the iMac and Muse 2015

  You can just copy/paste the enchilada itself on another page, pretty easy!

  If you want to reuse more often, you can open the library or libraries CC , to store and later hanging out once again. Note: for the creation of an article in the 'old' library, you must select the element on the page and click on the new icon in the " library " window To create an element of CC libraries , you can simply drag something in and out of the window libraries CC .