How to pass the cat Bkup and files Bkup LR image on the right external drive?

Similar Questions

• 4540 proBook s: how to choose the right network driver

  Hello guys. I clean installed Windows 7 Professional. Now, I see that I can not connect my computer to the internet, so I need to install the network drivers. I wen to the HP website and saw that there are 19 different network for my laptop drivers.
  How to choose the right method?

  Hello:

  Below are the links to the ethernet and wireless drivers you need...

  Wireless:

  This package contains the installation package driver for Ralink wireless LAN controllers in the laptop models running a supported operating system.

  File name: sp66089.exe

  This card also needs a bluetooth driver...

  This package contains the OS driver installation package for the Ralink Bluetooth in laptop computers running taken in charge.

  File name: sp59632.exe

  Ethernet:

  This package provides the driver for the Ethernet Realtek controller in the laptop models running a supported operating system.

  File name: sp63213.exe

• How to pass the Local C drive D drive space that is saturated

  D drive shows 417 GB free of 418 GB;  C shows 601 MB free of 29.2 GB.  I moved all of my photos on L drive folder but result in little, if any, change in space.  My computer is very slow, to the point where I sometimes can not connect to the Internet or Outlook.

  I hope you said your drive sizes correctly.

  Your drive C: disk seems extremely low for Windows Vista to be installed on.

  And whence L: drive?

  You can not move space from D: to C: drive.

  Read this tutorial on how to:

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  See you soon.

  Mick Murphy - Microsoft partner

• How to pass the value of the run-time file .sh by Oracle procedure

  I have a file test.sh that contain

  #1/bin/bash

  exp test/test@orcl file=/home/oracle/dump/test.dmp log=/home/oracle/dump/test.dmp grants = Y = index constraints Y = Y = (test) owner statistics = none

  Exit 0

  I craete a work called Create_job_proc in this work, I want to pass the value of job_action is the location of the file test.sh to

  /U01/home/Oracle/dump/test.sh and want to spend the test/test@orcl as a variable...

  Please suggest me... how to pass the value of Job_Action which will replace the .sh file content test/test@orcl to the value of the time of execution as scott/tiger@hr

  Thank you much Parth... It works perfectly...

  Thank you all for your help...

• How to pass the CS5.5 to CS6 and how much it cost in New Zealand?

  How to pass the CS5.5 to CS6 and how much it cost in New Zealand?

  If you do not want to go on the road to cloud and to subscribe, then Adobe still sells CS6 (online only) through their Web site

  http://www.Adobe.com/au/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software_s l_creativesuite6.html

  (Make sure you are in the store NZ - check the country link above Copyright in lower LHS of the page)

  Select your product and then click on buy

  I want to buy: select upgrade from the menu drop down

  I own:

  Make your purchase.

  Cost of upgrade depends on how CS5.5 you have and which suite CS6 you want to upgrade to.

• How to pass the vcs - e License? A server to Server B.

  Hello

  my company has a vcs test server.  and we buy the new server.

  I need to spend vcs again server.   I backup and deploy using the vmware ovf file.

  deploy the success. but new server vcs poster license error.

  How to pass the license of vcs?

  Of his assignment, it is not necessary to use both servers at the same time.

  If I see, if you move the virtual computer between two servers and you used local storage the

  Serial number will change...

  Please remember useful frequency responses and identify useful or correct answers.

• How to pass parameters in local html files using InDesign?

  How to pass parameters in local html files using InDesign, or how to pass info environment, such as the image, the html code is sitting on top in local html files in InDesign?  I try to use the code html-javascript, then simply pass parms to behave differently depending on where the code is placed in the folios of InDesign.  I don't know how to do it.  If I could read in some environment of the folio InDesign info by using html or javascript, which might work as well.  Please advise, thank you!

  In indesign, you can draw a box and connect the html code to display in this box, if you do it this way you don't let the application in browser.  In the control panel overlays folio, its web called overlays.

  I suggest you download Bringhursts ipad Bob application called DPS tips, it will give you a quick overview of all different overlays and basic opportunities.

  https://iTunes.Apple.com/us/app/Digital-Publishing-Suite-tips/id436199090?Mt=8

  Joe

• How to pass the session IMAQ to the Subvi

  Hello

  My experience with LabView is neither very good nor extended. I am a scientist and I'm with IMAQ data acquisition. My current problem is that the people who wrote the script is modular, versatile, or clear initially structured. So I try to reduce the ridiculous number of tests in a simple flowchart to a level that people can actually understand it... and to make the more versatile script for future experiments.

  I'm introducing quite a few subVIs to be executed repeatedly. However, I can't know how to pass the IMAQ session on the Subvi. I constantly get the error messages. In this case, I want to acquire images with OIDE_CollectFrame.vi controlled by OIDE_TrialPhaseCollect.vi. I couldn't understand how to assign the refnum IMAQ session class, either.

  It is probably a newbie question, but usually I program with LabView.

  Dennis

  
  

• How to pass the value?

  Hello.. I'm creating an application of streaming, in which I have a list field in a screen like this...

  1

  --------

  2

  --------

  3

  --------

  and when the item 1 is selected means a url must be passed to the video player...

  I created the list field screen in a package and a video player in other package... but I do not know how to pass the value of the field from the list to the player... Help, please... its URGENT...

  You can get the index selected by the listname.getSelectedIndex () method and compare that value with Vector data (data store URL) .that you will give a correct value from the URL and pass it.

• I have one of my programs adobe on a mac pro, which is broken. How to pass the program over this i mac?

  I have one of my Macbookpros that has a broken screen. How to pass the program Adobe of it ti that I have Mac?

  Download/install the desktop application, connect and install applications subscription.

  https://helpx.Adobe.com/creative-cloud/help/download-install-app.html

• How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  How to pass the album Live view mode Design while working on a fluid page? The drop down option isn't there as if it was on other pages.

  You can not.  If you want to work with FGLayouts, I recommend drop back to the Release of June 2014 CC before they took the Design of FGLayouts mode.

  You can get the version of June 2014 DW direct links below:

  Win: http://download.adobe.com/pub/Adobe/Dreamweaver/WIN/CC/Dreamweaver_14_LS20.exe

  Mac: http://download.Adobe.com/pub/Adobe/Dreamweaver/Mac/CC/Dreamweaver_14_LS20.dmg

  Solution #2: Modify your CSS FGLayout file by adding an X to the code as shown below.  This trick DW into thinking that it is a normal page, so you can use the new Design view.   NOTE: Do not change the CSS in design Panel.  Do it in Code view.  Record.  Close DW.  New launch DW.

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Nancy O.

• How to pass the start settings in starting a virtual machine?

  How can I use PowerCLI to start a new Linux VM and the nucleus of some startup parameters?

  What would be more simple: (a) to make and use a virtual machine model, or (b) to boot from an ISO image, or (c) start with a Linux VM and the clone who?

  The basic Linux is RedHat on an ISO on the network (ISO can be on a local path running the PowerCLI script if necessary).  If a model would be easier then a diagram how to make one of my ISO would be great!

  RedHat Linux can be configured by passing parameters of the kernel startup, so kickstart configures the system, something like

  KS=/my/path/KS.cfg otherparams

  where KS.cfg says kickstart what to do.

  How to pass the start settings in the new virtual machine?

  (It is probably completely irrelevant, but I work with Xen using bash scripting and)

  $UUID = xe model vm-install = "RedHatLinux64bit."

  XE vm-param-set uuid = $UUID PV-args="ks=/my/path/ks.cfg '.

  XE-vm-beginning uuid = $UUID

  now, it must be implemented on ESX. To determine when the new VM is fuly configured, my scripts from kickstart wrote a semaphore to be detected by the bash script.)

  I know very little about ESX and PowerCLI details will be particularly useful if you please!

  Thank you!

  Enjoy your break

• How to pass the ObjectType as input for search criteria

  Hi all
  
  I have the search function that takes input parameters and returns all matching rows. It is only forward. My problem is to have several types as an input parameter. This is the reason why I'm not able to pass the value of entry for these types.
  
  My Input Type table looks like this.
  
  CREATE OR REPLACE TYPE T_T_PARTY_REQUEST_CRITERIA
  AS THE T_O_PARTY_REQUEST_CRITERIA TABLE;
  /
  CREATE OR REPLACE TYPE T_O_PARTY_REQUEST_CRITERIA
  AS AN OBJECT
  (
  SYSTEM_IDENTIFER VARCHAR2 (50).
  PROCESS_TYPE VARCHAR2 (50).
  UPDATED_BY VARCHAR2 (50).
  STATUS VARCHAR2 (50).
  CHILD_REQUEST_INDICATOR VARCHAR2 (25).
  TRACKING_REQUEST_INDICATOR VARCHAR2 (25).
  REQUEST_TYPE VARCHAR2 (50).
  REQUEST_TYPE_CLASS_NAME VARCHAR2 (50).
  PARTY_KEY_IDENTIFIER T_T_PARTY_KEY_IDENTIFIER,
  ADDTN_IDENTIFIER_INFO T_T_ADDTN_IDENTIFIER_INFO
  )
  /
  
  Finally the two entries are type again.my question is how to pass the values of these two T_T_PARTY_KEY_IDENTIFIER and T_T_ADDTN_IDENTIFIER_INFO. I defined the last two types now.
  
  CREATE OR REPLACE TYPE T_T_PARTY_KEY_IDENTIFIER
  AS THE T_O_PARTY_KEY_IDENTIFIER TABLE;
  /
  
  CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_INFO
  AS THE T_O_ADDTN_IDENTIFIER_INFO TABLE;
  /
  
  CREATE OR REPLACE TYPE T_T_ADDTN_IDENTIFIER_VALUES
  AS THE T_O_ADDTN_IDENTIFIER_VALUES TABLE;
  /
  
  CREATE OR REPLACE TYPE T_O_PARTY_KEY_IDENTIFIER
  AS AN OBJECT
  (
  PARTY_KEY_TYP_NM VARCHAR2 (50).
  PARTY_KEY_VALUE VARCHAR2 (50)
  )
  /
  
  CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_INFO
  AS AN OBJECT
  (
  ADDTN_INFO_KEY_TYP_NM VARCHAR2 (50).
  ADDTN_IDENTIFIER_VALUES T_T_ADDTN_IDENTIFIER_VALUES
  )
  /
  
  CREATE OR REPLACE TYPE T_O_ADDTN_IDENTIFIER_VALUES
  AS AN OBJECT
  (
  ADDTN_RQST_VALUE VARCHAR2 (50).
  ADDTN_RQST_VAL_DT TIMESTAMP (6).
  NUMBER OF ADDTN_RQST_VAL_NUM (19: 2)
  )
  /
  
  I glued the request my function here. When I pass the value null in the entry for these 2 types my query works. otherwise, it's say no valid Identifier.First I tried with the first Type.
  
  I am passing the value that
  (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
  
  Error is Error (34,147): PL/SQL: ORA-00904: "ITTPRC." "" "" PARTY_KEY_IDENTIFIER '. "" PARTY_KEY_TYP_NM': invalid identifier
  
  
  SELECT DISTINCT T_O_PARTY_REQUEST_IDENTIFIER (PR. IN BULK PRTY_RQST_ID) GATHER IN T_T_P_R_CRITERIA
  TABLE (CAST (I_T_T_PARTY_REQUEST_CRITERIA AS T_T_PARTY_REQUEST_CRITERIA)) ITTPRC;
  PRTY_RQST PR
  JOIN BUSN_APPLC ON BIAP BIAP. BUSN_APPLC_ID IS PR. BUSN_APPLC_ID
  JOIN INTN_STATS INSTS ON INSTS. INTN_STATS_ID IS PR. INTN_STATS_ID
  JOIN INTN_PROCES_TYP INTPTY ON INTPTY. INTN_PROCES_TYP_ID IS PR. INTN_PROCES_TYP_ID
  LEFT JOIN RQSTYP ON RQSTYP RQST_TYP. RQST_TYP_ID IS PR. RQST_TYP_ID
  JOIN ADDTN_RQST_INFO ADTINF WE PR. PRTY_RQST_ID = ADTINF. PRTY_RQST_ID
  JOIN ADDTN_INFO_KEY_TYP ADDKEY ON ADTINF. ADDTN_INFO_KEY_TYP_ID = ADDKEY. ADDTN_INFO_KEY_TYP_ID
  JOIN PRTY_KEY PRTKEY WE PR. PRTY_RQST_ID = PRTKEY. PRTY_RQST_ID
  JOIN PRTY_KEY_TYP PRKYTP ON PRTKEY. PRTY_KEY_TYP_ID = PRKYTP. PRTY_KEY_TYP_ID
  WHERE (BIAP. BUSN_APPLC_NM = ITTPRC. SYSTEM_IDENTIFER OR ITTPRC. SYSTEM_IDENTIFER = 'ALL' OR ITTPRC. SYSTEM_IDENTIFER IS NULL)
  AND (INTPTY. INTN_PROCES_TYP_NM = ITTPRC. PROCESS_TYPE OR ITTPRC. PROCESS_TYPE = 'ALL' OR ITTPRC. PROCESS_TYPE IS NULL)
  AND (PR. UPDT_BY = ITTPRC. UPDATED_BY OR ITTPRC. UPDATED_BY = 'ALL' OR ITTPRC. UPDATED_BY IS NULL)
  AND (INSTS. INTN_STATS_NM = ITTPRC. STATUS OR ITTPRC. STATE = 'ALL' OR ITTPRC. THE STATUS IS NULL)
  AND (PR. CHLD_RQST_IND = ITTPRC. CHILD_REQUEST_INDICATOR OR ITTPRC. CHILD_REQUEST_INDICATOR = 'ALL' OR ITTPRC. CHILD_REQUEST_INDICATOR IS NULL)
  AND (PR. TRACK_RQST_IND = ITTPRC. TRACKING_REQUEST_INDICATOR OR ITTPRC. TRACKING_REQUEST_INDICATOR = 'ALL' OR ITTPRC. TRACKING_REQUEST_INDICATOR IS NULL)
  AND (RQSTYP. RQST_TYP_NM = ITTPRC. REQUEST_TYPE OR ITTPRC. REQUEST_TYPE = 'ALL' OR ITTPRC. REQUEST_TYPE IS NULL)
  AND (RQSTYP. RQST_CLASS_NM = ITTPRC. REQUEST_TYPE_CLASS_NAME OR ITTPRC. REQUEST_TYPE_CLASS_NAME = 'ALL' OR ITTPRC. REQUEST_TYPE_CLASS_NAME IS NULL)
  - AND (ITTPRC. PARTY_KEY_IDENTIFIER IS NULL).
  - AND (ITTPRC. ADDTN_IDENTIFIER_INFO IS NULL).
  AND (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM = 'ALL' OR ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM IS NULL).
  
  someone can say is that this approach is correct. If this isn't the case, suggest me.

  I am passing the value that
  (PRKYTP. PRTY_KEY_TYP_NM = ITTPRC. PARTY_KEY_IDENTIFIER. PARTY_KEY_TYP_NM OR

  PART_KEY_IDENTIFIER here is a nested table. If you cannot join it like that.

  Try like this

  prkytp.prty_key_typ_nm in (select party_key_typ_nm from table(ittprc.party_key_identifier)) or
  

  Here is an example based on the EMP table.

  I created as a result of nested table.

  SQL> create or replace type my_emp_list as table of number(10)
    2  /
  
  Type created.
  
  SQL> create or replace type my_dept_obj as object(deptno number(10), emp_list my_emp_list)
    2  /
  
  Type created.
  
  SQL> create or replace type my_dept_tbl as table of my_dept_obj
    2  /
  
  Type created.
  

  I'm going to use the data of the table nested within a query to get the value of the emp table

   my_dept_tbl
   (
     my_dept_obj
     (
       10, my_emp_list(1,2,3,4,5)
     ),
     my_dept_obj
     (
       20, my_emp_list(6,7,8,9)
     )
   )
  

  The query would be like this

  SQL> select e.*
    2    from emp e
    3    join table
    4         (
    5           my_dept_tbl
    6           (
    7             my_dept_obj
    8             (
    9               10, my_emp_list(7839,7782)
   10             ),
   11             my_dept_obj
   12             (
   13               20, my_emp_list(7566,7369)
   14             )
   15           )
   16         ) t
   17      on e.deptno = t.deptno
   18     and e.empno in (select column_value from table(t.emp_list))
   19  /
  
       EMPNO ENAME  JOB              MGR HIREDATE         SAL        COM     DEPTNO
  ---------- ------ --------- ---------- --------- ---------- ---------- ----------
        7839 KING   PRESIDENT            17-NOV-81       5000          0         10
        7782 CLARK  MANAGER         7839 09-JUN-81       2450          0         10
        7566 JONES  MANAGER         7839 02-APR-81       2975          0         20
        7369 SMITH  CLERK           7902 02-APR-81       2975          0         20
  
  SQL> 
  

• During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  During the import of my camera or a file in Lightroom 5 my pictures are too exposed by 1-2 stops, while they are well exposed on the screen of the device. How to get the "right-exposed images on the screen?

  There is an option in your Lightroom preferences, under the general tab, "treat JPEG files next to raw in form of images". If you have this option is checked, then Lightroom will import and view your first two and JPEG files. You use the active D-lighting on your camera? If you are, you must disable this feature.

• How to pass the parameters or values film double hollow?

  Hello

  I create a game in Flash 8 with 2 AS and I have some questions to ask.

  First of all, I'm stuck for 2 days to create a tower Laser beam to the target.

  I searched the internet for solutions but I can't really find one, so I'll try display of questions myself...

  First I tried to create, and the effectHolder in which each laser beam has been created, because it seems I can create only one line in each movieClip...

  _root.duplicateMovie(effectHolder_mc , "effectHolder_" + this, _root.getNextHighestDepth());
  v = a = _root["effectHolder_" + this];
  ray.onEnterFrame = function() 
  {
  v.clear();
  v.lineStyle(1,0xFF0000,100);
  v.moveTo(this._x, this._y);
  v.lineTo(creep._x , creep._y);
  v.text = "True"
  }

  It's triggered eveytime, she was a target.

  With each turn that triggered a laser that I created, it became more than offset, so I tried selfdestructing after some time.

  this._alpha -= 10;
  if (this._alpha <= 0)
  {
       this.removeMovieClip();
  }

  But he did not actually work, so I tried another solution. I tried to give each MovieClip ("Laser"), duplicate code that creates the laser beam.

  onClipEvent(load)
  {
       this.fx = from._x;
       this.fy = from._y;
       this.tx = to._x;
       this.ty = to._y;
  }
  onClipEvent(enterframe)
  {
       _root.dmg.text = "From: " + fx + "," + fy + " To: " + tx + "," + ty; //I used this on a textbox to see if parameters are transmited. But they were all 'undefined'
          this.clear();
       this.lineStyle(1,0xFF0000,100);
       this.moveTo(from._x, from._y);
       this.lineTo(to._x , to._y);
  
       this._alpha -= 4; 
       if (this._alpha <= 0)
       {
            this.removeMovieClip();
       }
                                
  }

  The problem is that I did not know how to pass the coordinates of the tower and the target to the MovieClip so that it knows where to create the line.

  X++;
  duplicateMovieClip(_root.Laser, "Laser" + X, X,{from._x,from._y,to._x,to._y});          
  g = _root[_root.Laser + X];
  g.fx = from._x;
  g.fy = from._y;
  g.tx = to._x;
  g.ty = to._y;

  Please leave suggestions on how to send the parameters or values for the created clip, or an idea of the creation of this line ("beam") for each tower, without so much trolling.

  Thank you

  Chris

  What is the trigger of v's _alpha decrease?