Power pwer replaced, does not start.

Similar Questions

• my computer has the power, but it does not start.

  my computer has the power, but it does not start. crancking for several minutes, after that it will quickly be able to record and then it starts again. Also, he asked once to restore to an earlier date that I did. He worked for a night, but come back to the same thing. Help!

  Hi moozer_890

  
  1 during how long have you had this problem?
  2. have you updated display drivers installed on the computer?

   

  Method 1 :
  To resolve the problem, you can see if the uninstall and reinstall then the display driver-
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Method 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site, then check.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Inspiron 620-7750 Radeon with 450W power supply installed does not start

  Hello!

  I have looked EVERYWHERE online and on the forum and have seen several posts on this topic and still not found a solution that works.  I have a Dell Inspiron 620

  • I5Intel Processor2nd Gen Core i5-2310 / 2.9 GHz
  • Memory8 GB / 8 GB (max)
  • Windows 7 Home Premium 64 - bit Edition operating mode
  • Optical DriveDVD±RW
  • Graphics technology ProcesseurIntel HD Graphics 2000 dynamic video memory 5.0
  • Integrated graphics controller

  Recently, I buy a Powercolor Radeon 7750 graphics card I have installed the drivers, uninstalled the current Intel Graphics driver from Device Manager and then install the new card.  I of course unplugged the PSU got rid of and left in power has failed to myself and plugged into the PCI-E.  After I tired to turn on but it does not start.  Fans begin to turn, including on the graphics card, but nothing comes up on the monitor and it won't start.  When I unplugged the 7750 card it starts very well?

  At first I thought that it was not powered ridiculously horrible 300w PSU they put so that I have upgraded to an a 450w.  Everything works with the new power supply installed without the card, but as soon as I plug the new map, he continues to not start as before installing the card.  I have searched and tried things for 2 days now and CAN NOT find a solution.  I know that the 620 does not access the menu of the BIOS under settings in advance who does not help (don't know why Dell would never think it was a good idea!) so I can't change anything in there.

  Please, any help would be fantastic!

  Thanks in advance!

  The card is a bad card.  There should be ZERO problems with the supply of the stock 305 w and a 7750.

• Power switch T30 does not start the computer

  New motherboard installed by Lenovo's Mexico on a guarantee out of T30. Machine will not start. Any ideas where to start (outside the machine back for another long stay of the shipment) would be appreciated. Not my machine. Benefit for a friend.

  ajkula66 wrote:

  You can turn on with one of your A3x keyboards... less than what I remember.

  Good luck.

  Thank you. I stuck an A31 keyboard on it and it turned on! A took a look on the original keyboard. Jumped the bezel around the button cell and found the power button was missing the rubber dome which lies beneath the button. A keyboard A31 cannibalized and it is stuck in the keyboard T30. Major PITA but a few minutes of fumbling had done. Computer works fine.

  I looked inside the frame, but did not find the old piece of rubber. Chalked it up to the mysterious things that happen in transit. The owner swears that the power button was functioning before the swap to the mobo. In any case, thanks for the tip on the keyboard.

• My Power Mac CGI does not start

  When I push the button start white light only on and outside.

  I am running OS 10.7.5

  The power light flashes under control of the program when "not enough RAM works for start.

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• Dell XPS-8900 does not start

  Worked well to date, 01/01/2016 - Happy New Year, NO!

  Change power cable, use a different outlet (other items such as router and network printer can very well). Computer still does not start.

  When I plug it in the computer power light turns on light and then turns off (this seemed normal before). So if I push the power button computer does not start.

  I don't seem to get an orange light sequence of 2-1 after trying to turn it on - and continues. Maybe some sort of signal POST?

  I can turn the computer (not my first choice) after our journey ahead. But I'd rather get it upward and now running. Have work to do.

  Phil

  More information. I had four USB3 external drives attached, whose two propulsion and two disks Seagate Wireless - which is recharged through its USB port.

  Removing only the second Seagate drive allows the machine starts. So the question can be too much of a drain on the USB card current.

  Once started, the system seems to work very well with that wireless Seagate drive attached, and it restarts with it attached - just not boot from a condition of Shut Down.

  Not sure really, I understand that, but I can live with that.

  If someone seems something more insidious in this behavior, please notify; bought the XPS-8900 at COSTCO and still about 55 days return if it is defective!

  Phil

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• Vista does not start after power failure

  It is a Dell Inspiron 1525 with Vista 32 - bit, recently replaced hard drive

  My daughter has been using the computer and the power failed due to low battery.  Now, the computer does not start normally and not all programs will run.

  If I choose "safe mode", it hangs on crcdisk
  If I choose 'window start normally' it crashes to the screen of Microsoft Corporation
  If I choose "last known good configuration" then it seems to start normally, but does not all programs run.

  I tried to boot from the OS disk, but it ignores the entire disk
  I tried to run the installation disk once the computer is running, but it freezes.

  Need solutions.  Thank you.

  Hello Bakajanaidesu,

  Thank you for posting.  It seems that you have a hardware error or failure with your hard drive.  In this case, I recommend that you contact your Dell technical support for more information on how to correct this problem.

  Please let me know if I can be more useful. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio X 500 does not start and the power LED is flashing every 5 seconds

  Hello
  I need help my X 500 does not start now. I tried to launch the NB as usual and suddenly the X 500 start or even power up.

  If I press the power button / stop it makes no noise, the power LED on the button and the second power LED just bliks once and turns on and keep blinking every 5 seconds.

  I tried to:
  * Remove battery and power up with AC only
  * power only to batteries
  * remove the battery power button hold for 30 seconds and over power with AC, battery only athen

  but it did not help.

  I checked the LEDs AC & battery, but they do not blink, they are just RED, so there is no problem in battery or AC.

  No idea where could be the problem?

  Thanks for help
  Frantisek

  Hello

  The failure of RAM could be the reason for this behavior of the laptop.
  Remove the RAM modules with good modules tested and check the functionality of the laptop.
  In the case of RAM isn t the troublemaker, the motherboard could be affected.

  Good luck and share your experience with us.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Tecra M2 does not start - the power light AC blinking orange

  Someone at - it a list of codes for the Tecra M2 flash.
  My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.

  I checked the battery and reinstall the RAM.
  Any IDE?

  Hello

  I agree with go.
  The ASP would be able to tell what means error.

  Usually means short and 1 long: 0
  So the error must be: 1010 1010
  Due to the last significant bit (LSB), to be read by behind:
  So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.

  Then, you will get a hex code.
  But unfortunately, I m not very well which could mean this code

  So ask ASP for help!

• Satellite L650 does not start sometimes the Power button

  Sometimes when I press the button works / starting the fan of laptop and the laptop does not start.
  However when I press once again lights up.
  This does not depend on how long you keep holding the power button so that it starts.
  Anyone facing this problem.

  Thank you.

  What exactly do you mean by does not start?
  Is this means that the laptop has been closed or has been set to standby or hibernation mode?

  Are you able to see the Toshiba start screen when you switch on the device?
  If fans hang on this means that the laptop has been put under tension, and then you the OS should start to initialize.

  PS: usually it s no matter how long the power button could be pressed. Briefly press (1 sec) should turn on the laptop.
  But if you do not want to power OFF using the Notepad works / stop, then you will need to tap more long time 4 sec long but it is not recommended that this reset should be made only if the OS hang