How to pass the virtual computer for the upgrade of the hard drive?

I installed ESXi on a server with only 80 GB installed hard drive (RAID-1). Now, I'll upgrade the two 1 TB drives (RAID-1). What is the best possible method to back up my VM?

I have a standby server. Installed ESXi on it and transferred a VM using VMware Converter for this spare server. After upgrading the hard disk and reinstall ESXi I want to transfer my VM to the server of origin.

Is this the right way or is there an easier way?

Thank you

Chantal

Hello

I don't see a problem in you turn the VM on the server as well spare, you can very well do it and use it until your main server is up and Runnin'. Once the primary server running stops the virtual machine on the spare part and then copy.

Thank you

Samir

PS: If you think the answer is useful please consider rewarding points.

Tags: VMware

Similar Questions

  • Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

    Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

    Thanks in advance for your help.

    D.

    Hello:

    The only manual that I could find is one that covers the ze5600.

    See if it will work for your model too.

    http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

  • How to reformat the hard drive and do a "clean" install

    A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

    Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

    Thanks in advance

    Skip

    Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

    http://www.theeldergeek.com/disk_management.htm

    In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

  • How to access the hard drive USB on E3000? Am I missing something?

    I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

    Am I missing something simple?  I use Windows XP.

    Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...

  • How to remove the hard drive of a laptop the dv4 1444dx

    Hello

    Can someone tell me how to remove the hard drive of a 1444dx dv4 notebook? My laptop does not pass enven boot in safe mode. I tried to let repair system automatic and also tried recovery to a date when the latter worked correctly, but neither translates into success.

    I want to remove the hard drive and save my data before trying to reinstall the original image from the D: drive.

    Thanks for any help you can provide.

    Kind regards.

    Hello

    The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

    Kind regards

    DP - K

  • How to clear the hard drive on my old iMac of 2008?

    I have a 2008 iMac I want to recycle. How to clear the hard drive?

    (What is PPC?)

    PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

  • Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

    This model encrypted?

    If this is not the case, how to destroy the hard drive? Where is the hard drive?

    Hi @Diane47,

    Thanks for joining the Forums of HP Support with your request to printer.

    I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

    HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

    You can clear the memory by restyoring the printer back to the default values.

    1. on the printer Panel, select Setup.

    2. from the Configuration menu, select Tools.

    3. on the Tools menu, select Restore Factory Defaults.

    HP offers to recycle their products for you. If you want to know more about it, please click here.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Satellite P10 - how to change the HARD drive?

    Hello

    I want to change my Satellite P10 for a bigger HARD drive.
    But I Don t know how to remove the DvD drive.

    On this laptop, I mean that the HARD drive is under the DvD drive.

    Please help me, if you know how to change the HARD drive.

    Welcome them

    Mister_X

    Hi Frank,.

    I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

    The hard drive is fixed with 4 screws (2 on each side)

    HTH

  • Satellite A30 - how to remove the hard drive

    Hi, new here...

    Can someone tell me how to remove the hard drive in my Tosh A30...

    Thank you
    captainp

    Hi Tim,.

    The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

    The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

    HTH

  • How to clean the hard drive of the computer

    I need to know how to erase my hard drive to get rid of a virus

    Hello Nguyen,

    Thank you for visiting Microsoft Community.

    I understand you want to wipe your hard drive to remove any infection by the virus from your computer.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. When you say 'I need to wipe my hard drive to get rid of the virus', do you mean you want to remove the virus from your computer or to completely erase your hard drive by erasing all the data on it?
    2. You want to clean install a new copy of Windows on your computer after removing all your data from the hard drive?

    If you do not want to delete all your data and do not want to clean your computer of viruses, you can scan your computer with the Microsoft Safety Scanner.

    Download and run Microsoft security scanner from the link below.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    However, if you want to completely clean your computer, just remove the hard drive and pure, install a fresh copy of Windows on your hard drive, you can read the article below to do so.

    How to perform a new installation of Windows?

    http://Windows.Microsoft.com/en-us/Windows-8/clean-install

    Important note: Perform a clean installation will mean that all your data currently on your hard disk will be permanently lost. It is strongly recommended to have all your important data saved enough on any driver external before performing one of the suggestions above.

    Hope this information is useful. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  • How to clear the HARD drive for confidential data before attaching to the third party?

    My HARD drive needs to be fixed and would like to know how to erase confidential data in the HARD drive before giving it to third parties.

    Reformatted would it be sufficient?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions

    The best way in my opinion is using AutoNuke in Dban. Make sure you have the desired data off the drive hard until you execute Dban. Once you run it, it's over.

  • How to partition the hard drive

    Hi, anyone knows how to disable partition the hard drive? Getting sick of the transfer of information between C: and E: Paulette

    Go to control panel, administrative tools, computer management, disk management.

    Do right click on E a remove it. After that, you should be able to enlarge C with right click and choose the option of not. But you'll have to save files on E first, so as not to lose them.

    If this does not work for any reason, you will still be able to use 3rd programs like partition magic. I've used several times and I am very happy with it.

  • Portege R200 - how to replace the HARD drive

    Fundamental questions about the Toshiba Portege R200 (purchased model birthday Thailand August 2005) are:
    (1) Please provide instructions to remove the hard drive (non-functional) (illustrations if possible)
    (2) model has enough space inside for hard drive 2.5 inch? (Impossible to locate 1.8 inches and below, to get the results of [expensive] calls to Toshiba - of interest only)

    Background:
    (1) while 3 years warranty in force I trecked (expensive) of Malaysia in Bangok (where to buy) at the headquarters of Toshiba (if you know Bangkok taxi drivers, you'll know what a test or going around in circles and the nonsense in the fire that was)... Toshiba agreed HD vibrating but reported would take 3 to 10 weeks to get the HD replacement (!?)
    (2) I was a few weeks later to the r - u (to tie)... They told me they couldn't help; I "should contact my provider...". This is an Asian model, in Europe, we cannot... etc etc.
    (3) a week later the HD has no
    (4) I contacted Toshiba but they told me the warranty expired 7 days before...
    (5) since this time I phoned and was put on hold for Toshiba in the region of London (several times), Singapore (3 times), Thailand (well, if you know how it goes, say-no more, shots of elbow-boost)...

    I got nowhere. But were invited by the media to bring it to the headquarters of Thai (yet)... It's all right, I'll book a flight and hotel etc now, shouldn't cost all that much more than the computer cost me initially...

    Oh, another thing, not very important: to help out me, I bought a lighter machine at Toys R us... 300 quid... for the love of antiquity I always want to get the old dog to this shiny Silver Anniversary edition slim R200 works again...
    I have a 2.5 "HD available (recond and costs all 9 quid in Brummagem) but before I destroy the old R200 dog by ineptitude... (and lost to carefree annoyance no assistance of Toshiba)... and/or on how to remove HD, please?

    Hello

    I have seen words about your question.
    AFAIK the R200 was equipped with the utility of the HARD disk protection. It is a feature to reduce the risk of damage to the HARD disk.
    Using the acceleration sensor built into the computer drive HARD protection detect vibrations, shocks and sings in the computer and automatically moves the HDD Head somewhere course, in order to reduce the risk of damage.
    But this function does not ensure that the HARD drive will not damage! It reduces the risk of damage!

    However, the HARD drive can be removed very easily.
    At the bottom of the unit, you will find the HARD drive Bay. It s close to the battery (on the left).
    You need to remove two screws to get access to the HARD disk 1.8.

    PS: You can use disks hard only 1.8. The 2.5 hard drives are not compatible.
    I discovered that you can use a TOSHIBA 60GB 4,200 rpm 1.8 HDD HDD1544BZK01

    Welcome them

  • Satellite L300-144 - how to replace the HARD drive?

    Hello!

    I have a problem: my laptop is Satellite L300-144, but I don't even know my hard drive model.

    Anyone know anything on this subject? And how replcae it? I mean where the hard drive is placed?
    And another question: is it available in BestBuy for example?

    THX

    Hello

    As Akuma said on the underside of the laptop, you will find a HARD drive cover is fixed by 2 screws I think. If you remove these screws, you can see the HARD drive and remove/Exchange it.

    Satellite L300 supports SATA 2.5 hard drives, and you can buy the HARD drive of every computer store where you want to.
    I have good experiences with Seagate and Western Digital hard drives but of course, you can buy a disk from a different manufacture. ;)

  • Tecra M5: How to use the HARD drive password when the HARD drive is connected as an external device?

    I have a Toshiba Tecra M5 with MK1032GSX hard disk. I put a bios password and HARD drive password. Every day I turn on my laptop with my password a number only once: unlock the disk and bios. The password screen is before windows starts.

    One day my laptop motherboard is broken, I bring my pc on the Toshiba support center (less disc) and I'm waiting for him (2 months ago). I need to read my date of the disc, but it is locked by password. The drive is a SATA drive, I put it on a desktop computer and I see it in the bios and in windows resource device, but I do not see in the Explorer.

    None of the software I've tried (HDD unlock, atapwd...) will not work. I have my password, I have not forgotten.

    How to read my date? Can you help me?
    Thank you.

    Hi Oscar

    Hmmm I m not 100% sure, but I think that it s not possible to remove the HARD drive HARD drive password if you haven t your laptop.
    I know that if the HARD drive password has been set the HARD drive is not more accessible and more usable.

  • Satellite A200 - how to replace the HARD drive?

    Hey, I recently some strange problems with my laptop. I installed a new copy of Windows Vista and also tried with Windows 7 a few times. But eveytime I get problems. The installation of the operating system right. But after I installed some Windows updates my computer becomes very slow and at some point, I am unable to install any application, because it crashes just when installing... This happends with all the big software products such as Visual Studio, 3d Max, After Effects... etc.

    So I think that my HARD drive has a large number of bad sectors. I also tried to erase everything on my drive with KillDisk, but it hangs at 16%. Once again something that seems to be my HARD drive.

    But before you buy a new, I'd like to hear your opinions on my problem and I would also like to know how I have to replace my HDD on a Toshiba Satellite a200. I don't know where it is placed and what parts I need to unscrew.

    Thanks for any help.

    Hello!

    The HARD drive is placed on the underside of the laptop.

    The HARD drive on the underside Bay is fixed by two screws. Remove the screws and the HARD drive. Then you can swap the HARD drive.
    But unplug the AC adapter and remove the battery before doing this.

    The new HARD disk must have the SATA interface.

    Good bye

Maybe you are looking for