How to print a picture on a HP Photosmart Premium C310a mirrored?

Similar Questions

• Premium Photosmart CN503AA: Photosmart Premium C310a is no longer prints black

  My Photosmart Premium C310a printer print is darker.  The following information may be useful:

  • Product number: CN503A, model number C310a
  • Two PC printer: we're a Windows 8.1 operating system (64-bit) and the other is a Windows 7

  So far, I conducted the following remediation efforts:

  • Replace the ink cartridge
  • Used HP support assistance to try to clean the printer and align the printer.  Alignment failed.
  • Replace the print head with a refurbished HP printhead.  (This also includes cleaning the area specified in the replacement instructions).
  • The printer still does not print in black.
  • Tried to align the print head.  He failed.

  Any suggestions?  The printer is no longer guaranteed.

  Thank you!

  Hi there @Scott1453

  I hope you are well!

  I read on how your Photosmart C310a is no longer printing black, and you've tried several unsuccessful troubleshooting steps.

  My suggestion for you would be to try a print head soak. See this post for instructions. Please follow them with caution: Re of Solution accepted: black ink does not

  If still not print ink, call us to discuss your options for printing with HP!

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  

• Photosmart Premium C310a printing blank Pages

  I have a printer Photosmart Premium C310a that I already returned a printer to the store for this same problem. After that initial set-up of the printer was working fine (not to mention that the white lines printed in the photos, but I could deal with it). As I said, I returned the first because I couldn't get the printer to print anything. Would make sounds as it was printing, but then spit on a blank page, no matter how, I have printed or copied. I changed the ink in new ink and still no luck. When I tried to align the cartridges he caught around for a while and then he said "alignment failed". So I took the product back and it replaced. Got a new and same exact situation happened. Installed and worked great... Using the same ink that wasn't on the previous printer... Now, two days later only puts on white paper... Help, please.

  Thank you

  Matt

  The firmware update can help some of these problems:

  Install a firmware update

  Looking for a firmware update that could help solve the problem:

  1. On the product control panel, tap the Setup icon ().
  2. Support on the Web .
  3. Tap the updates .
  4. Touch of the product updates .
  5. Tap Yes to update. The update can take 10 to 20 minutes. Do not turn off the printer until the update is completed. The printer will stop and automatically start up.

  These measures come from this document:

  Print quality troubleshooting

• Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a

  I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet.  However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a.  If I click on devices and printers, it shows my device from the computer as requiring troubleshooting.  When I click on troubleshooting it signals that "Driver for Photosmart Prem 310 is not installed.  Install the latest version of the driver.  When I applied the fix, it indicates that the driver is not found.

  I tried to download the latest driver on the website of HP in various ways, finally to uninstall all HP software displayed in the Panel and then removing all the HP files remaining on my laptop.  I then ran PC Tools Registry Mechanic, disabled my anti-virus, restarted the computer software and reinstalled the complete C310a software on the HP site.  It ended without any problem, and after adding the printer to my list of printer, it is printed on a perfect test page.  However, Device Manager always reports the C310a driver is missing, but it cannot find a copy when it finds one.

  How can I convince the device manager that everything is going well (apparently)?

  apeace, I recommend you do as you did, uninstall the printer under programs and features but also by ensuring that this printer he is removed from the Manager of peripherals and devices and printers. Then after restarting the computer and by disabling the firewall, download the drivers and software for full adjustment and install them.

  You can also run this utility and see if that solves the problem automatically!

  http://goo.GL/u3jDE

  Let me know!

• model No. Photosmart premium c310a series printer. CN503B - black hp 364 cartridges XXL

  My Photosmart Premium C310A Officejet7500A, model No. CN503B black 364XXL cartridges needs (hand right slot on transport but I can't find them anywhere.)  Where can I buy these?

  Hello

  There is no XXL cartridge for this printer that XL cartridges, please see the link below for the USA.

  http://www.shopping.HP.com/en_US/Home-Office/-/products/-/-/CN503A?HP-Photosmart-premium-e-all-in-one-printer-C310a&TargetPage=productsupplies

• pages white print Photosmart premium c310a e-all-in-one

  Bought a c310a e-all-in-one Photosmart premium in 2011-12.  He just started printing blank pages. I replaced all ink cartridges and now have the message: alignment failed. I tried the alignment printer and HP solutions without success. Is there a solution to this problem?

  Hi trainweck

  Although article I recommend you will be able to select your operating system

  If you other help I should know the what operating system are you using.

  Try this article, it may help to GO HERE

  Let me know the result, I will do my best to help you

  RobertoR

  Don't forget == ▼

• Have Photosmart Premium C310a. Ongoing problem to the loss of communication with the printer

  I have a HP Photosmart Premium 310 Ca and am running Windows XP.  About every month my computer loses contact with the printer.  The network works fine as is my email.  I tried restarting the computer, reset my router and the Setup error following to get instructions from XP. I tried to reinstall, and I can't seem to install.  I'm tired of this!

  I'm sorry that you are having this problem. There are several steps you can take to help your connection problem. First of all, when the printer is connected to your network, print a Network Setup page. On this page, use the ip address of the printer and that type in the address bar of your internet browser on your computer. Will take you to the server of the web integrated printer (EWS). Look for the Networking tab change the automatic ip addressing to public static ip (manual). You will then enter the ip address of the printer, followed by the subnet mask, and finally the default gateway, the info that will be on the Network Setup page you printed. Below, you'll assign 8.8.8.8 and 8.8.4.4 as the primary and secondary DNS. Who should manage the intermittent connection loss problems. With automatic addressing, the printer can request a new address whenever there is a network problem, which confuses the printer. Static IP or manual addressing, is tackling this problem. Let me know if it helps.

• T120: T120 how to print a picture .tiff to scale and filt 24 "width of the roll?

  I installed my new T120 today and tried to print a 24 "x 96" displays without success.

  The images have been scanned on 12 "x 48" and when I get their approval to the store they would resize 200%. "  I have not been able to print a full poster and lose just paper trying to figure out.

  I used the Print Options to change the page size of 24 "x 96" and also tried the automatic rotation of the width of the roll.  I changed the page layout in Portrait manually and also, which did not help.  I tried "to adjust the picture to the frame" checked and unchecked.

  Until now, when I do what I think changes are suitable for settings, I managed to print: a mini-print (width 2.5 "), a small printing (4" wide), an average print (8 "width), an extreme close which is correct in the width, but only the central part of printing, or a large roll of white paper.

  I do not currently have an Adobe product and just trying to print from original .tiff analysis

  Hello

  In all of drivers for the page size than the size of your page for the image I think that 12 "x 48", then in the set page/exit tab and in the resizing box select apt to roll or A1 or 200%

• How to print a picture outside the paper or canvas area?

  I have a gradient image I want to print out the size of the paper or outside the canvas area. I tried to change the document and configuration of the printer and nothing works. When I print, the page is a white border around the entire page. Can someone provide suggestions?

  I just scanned the PDF of Xerox for your printer and see no option for printing without margins listed. The normal procedure would be to print on oversize pater and cut to the desired size. Some printers to office inkjet or inkjet roll can do without borders for the reproduction of pictures or posters, but the color normal laser printer this is impossible.

• How to print an A7 envelope on a Photosmart 6500 printer

  I need print envelopes invitation wedding for a 5 x 7 invitation that takes an A7 envelope. There is no drop-down list option for this size envelope and the envelope's other names do not have the corresponding dimensions. Does anyone know how to do this? Thank you.

  I have a Photosmart HP 6510 printer that is wireless. I use Windows XP and Microsoft Word 2003. I had to select a type of letter sheet 5 x 8 and change all margins to get the printer to the printer without a mistake to mismatch since the dropdown selection has not customized on the HP or the A7 as a cjouce.

• HP Photosmart Premium C310a print is no longer

  Printing is very bad.  Do you have the clean & align but no help.  Load a new cartridge (bye-bye $20).  No help.  Printer has a problem for 2 years.  Go to amazon.com to find the replacement printer no HP.

  Ciara_B wrote:

  Hi, sorry to hear that you are thinking of switching. Have you tried the other steps in the below troubleshooting print quality paper?

  http://support.HP.com/us-en/document/c02187415

  Ciara

  Yes, I tried several of these Solutions last night, but the window display of the printer kept showing me that she had no alignment.

  Finally this afternoon when I used the Toolbox to align the print heads once again, a Test Page printing came out fine.

  There are approximately 603 Pages printed since I bought 22 months ago.

  QUESTION: How many pages more can I expect to get by until it's time to replace the print heads?

• HP Photosmart Premium C310a: c310a print the color of evil

  I bought new cartridges and when inserted, I tried to print and color of the image and printing are different. As an example, my picture in the computer is light green and it prints like a light blue and the Red turns purple. My computer is running Windows 7 64 bit. I cleaned the printhead twice.  Black seems correct, but the colors are false. My cartridges are inserted correctly.

  Could someone help me?

  Thank you!

  It looks like the yellow ink is out or do not print. The C310a separated print head and ink cartridges, so it is very likely that the print head is clogged, such that even a new cartridge still show the question.

  Try to do a 'clean' in the Tools menu print head, see if that helps (should see a spot of yellow, as well as red, blue, printed etc.).

• Printer e-all-in-one-HP photosmart Premium fax C410a 0xc19a0041 Windows 7 ink system failure

  How to solve my problem of 0xc19a0041? Vălean

  Hello

  Please click HERE to access the procedure which should solve the problem.

• How to solve the failure ink system for photosmart premium c309-g 0xc19a0013 code or code 0xc19a0023

  Photo black ink exhausted, replaced.

  Screen to the said cartridge incompatible or damaged.

  Purchased and installed.

  Screen says problem of print head and of the need to clean - done

  Screen now says ink system failure and had different codes whenever it is turned on 0xc19a0013 or 0xc19a0023.

  Followed all the recommendations on the help screen

  Nothing helps!

  Here is a link you can follow which can help you.
  http://goo.GL/UeJ32

  You already have some of these steps. If the link does not solve the problem, you can contact the Support of HP (1800-474-6836).

• HP Photosmart Premium C310a, Windows 8 64-bit, my eprint services are turned off how to re - activate?

  EPrint worked but now the message has not been activated and eprint services email disabled, web services.

  Thank you very much but I did already. Problem solved by turning printer off, then on.

  Tom