How to print envelopes with my 6510 with my mac

Similar Questions

• How to print envelopes with HP Officejet 5741 #10

  I have a HP Officejet 5741 on my desk and I send all the time correspondence. I need to know how to print address on envelopes #10 on this printer.

  Hey @BlacknGold,

  Welcome to the Forums of HP's Support.

  I see you have some problems with printing envelopes of 10 Windows PC to your Officejet 5741 e-all-in-one printer. I can help you with that.

  This document describes How to print envelopes to your PC.

  Please let me know the results after following the above. If you can print your envelopes, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• How to print envelopes with my new 3520 printer

  I tried to address an envelope with my new printer. I couldn't make it work.

  I'd take a glance at this document.

  Let me know how it goes.

• HP ENVY 7640: How to print envelopes

  How to print envelopes with HP ENVY 7640 e-all-in-one series?

  Hello

  Please follow the instructions below:

  http://support.HP.com/us-en/product/HP-envy-7600-e-all-in-one-printer-series/6617267/model/6617268/document/c04339981

  Kind regards.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• HP 4520 Envy: How to print envelopes from a desire 4520

  How to print an envelope of HP Envy 4520?  I did not receive a manual with the printer and the online manual does not envelope printing.

  Hey @MayBailey,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand you are trying to print envelopes from your PC for Windows 8.1 to your craving 4520 e - all - in - one printer. I can help you with that.

  This document describes How to print envelopes from your printer.

  Please let me know if this allows you to print your envelopes. If not then please let me know what happens when you try to print and what programs you print envelopes to and I should be able to help more.

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.
  
  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How to print envelopes on the HP OfificeJet Pro 8600,

  Hi people there;

  Recently I came across many people ask how to print envelopes in the printer even the HP Officejet 8600

  Do about it that I decided to provide the two statements in this document as well as the links in the article where I want to talk about the information. That way people who want whether fast and accurate to achieve by reading and following this article and all folk wanting to maybe dig section will provide more in depth information

  This is how load envelopes;

  
  

  I'll give you the link of the Article where this information was collected

  
  

  http://support.HP.com/us-en/document/c02890475

  Here the steps to load envelopes on the Officejet pro 8600.

  
  

  1. Grasp the handle at the front of the tray and then pull the tray toward you to open it.

  2. Figure 12: Pull the feeder

  3. Slide the width guides to the paper as much as possible.

  4. NOTE: If you load a larger size paper, pull out the extension of the tray to extend the status bar.

  5. Figure 13: The input tray Extension

  6. Insert envelopes in the center of the tray with the flap of the envelope on the left and upwards. If the valve is on the short end of the envelope, insert the envelope in the center of the tray with the flap towards the product and upwards.

  7. Figure 14: Envelopes of load

  8. Slide the paper width guides are against the edges of the envelope. Make sure the envelope is centered in the status bar.

  9. Push the tray into the product until it snaps.

  10. Figure 15: Push in the tray

  11. Remove the extension on the output tray the tray.

  12. Figure 16: Take out the tray extension

  It's the explanation on how to load envelopes into the 8600. Hope is useful

  Now check that the use of envelopes are supported by the printer,

  This article will provide you also with the support of the envelopes by this printers;

  http://support.HP.com/us-en/document/c02858465

  Is an important to properly load envelopes for use only envelopes supported by the printer.

  you could spend countless hours trying to figure what the problem is without realizing that the issue is the envelope that you use actually is not supported.

  
  

  Here is a list of envelopes supported by the Officejet 8600

  
  

  I hope it's to your taste.

  RobertoR

  ▼

• How to print envelopes on my Laserjet 200 M276

  How to print envelopes on my Laserjet 200 M276 installed on Windows Vista

  The information below is taken from the document "loading paper and envelopes."  The document can be accessed here.

• You print envelopes with HP LaserJet CP1525nw color

  I tried to print envelopes on our printer above.  My document is in Word is formatted accordingly for a #10 business envelope

  Under the terms of the HP help function, I found the info on how to set up my document print options, then it would print correctly.

  The first envelope printed on the side of Rabat; I have reloaded in Tray 1 and was ready.

  The second envelope printed with success so I thought that I understood.  So, I loaded the tray paper with 5 envelopes, hoping to print them massively.  I couldn't get it work when I tried to print 4 at a time.  I got a "Paper jam in tray 2" error and I was not yet using tray 2.  I erased the 'problem' and AN envelope printed with success, then I got the same error message.

  I had 2 envelopes more printed this way, but every time I got the same error message, erasing the machine and 1 printed envelope.

  Frustrated, I cancelled the multiple print job and tried to print envelopes one by one.  Now it does not at all even if I delete the phantom paper jam every time.

  Can anyone help with this?  It makes me nutty.

  Background info: my husband (network engineer) install the printer.  I have over 20 years of experience in processing and usually have good results with appearing on printing problems.  It left me speechless!

  Thanks for any help you can provide.

  Dianne

  The CP1525 allows you to print envelopes. There are two ferries, which can be used. I will describe using only the lower tray. Normally, this tray is used for standard paper.  To use the letter envelopes, you must remove the tray and then make some changes. Remove all paper. There are supporters of blue color paper. Two are used for the width of paper. Move the cursor to the Center so that it will load the envelope with the top to the left. Put the envelope with the printable side upward and the top to the left. Slide the blue paper holders so that they touch the top and bottom. Then push the envelope completely backwards and then move the holder unique blue paper in the front to make it against the envelope. You're ready to print as much as the printer.

  I select the printer properties. I indicate that I am printing an envelope. I had also to indicate the landscape. I also had to move the appropriate print areas where I want to be. Then I added my address and the address to where they're going. I'm not sure that I have everything but it should work well.

  I only did this, but you can use two trays with one who holds a number of pages and the other for a certain number of envelopes.

• 7525 HP: PRINTING ENVELOPES WITH MACBOOK PRO USING HP7525

  I'm trying to print envelopes of invitation with my HP using MacBook Pro 7525.  I tried the main tray, but I get an error message about the Photo tray.  I'll cancel the print job, and then try the Photo tray, but the envelope comes out without printing.

  Thank you

  If another program does not work, here are a few steps to try, in order:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Install the complete driver here: HP Photosmart 7520 e-all-in-one printer full feature software and drivers
  5. In addition, to download this driver: HP v3.0 for OS X printer drivers

  I have check the specifications of printers and A2 is a supported format.

  

  Good luck!

• printing envelopes with hallmark card studio

  I have been using studio hallmark card for decades with other printers. My cards are printing fine but I can't get an envelope to print with my new HP officejet Pro 8600?

  Hey rhea57,

  If you can print from other programs and the same settings do not work in these 2 programs, then the problem may be a driver conflict.  I would advise trying to print in draft mode to attempt to bypass the sensors of paper or page in a different driver such as the HP Deskjet 9800 driver.

  For more information about how to exchange for another pilot, please click here.

  Let me know if this helps get your features for printing envelopes returned in these programs.

  Jason

• Printing envelopes with laserjet MFP M175nw 100

  My laserjet MFP M175nw 100 works fine, as long as I print on standard A4 paper. But printing envelopes is another matter. The print is dirty and when I look closely, I see that repeated text on the envelope of what a few cm is smaller. Print a cleaning page does not solve the problem. The problem occurs both on the thin envelopes heavy quality.

  Operating system: Windows Vista

  Printer with the USB cable to the computer

  Print program: Microsoft Word 2007.

  Hi Jan_NL,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand when the printing envelopes printing looks dirty and is repeated printing of text below.

  I'll be happy to help you.

  Make sure you change the paper size of the application you are printing from and then assign the printer driver envelopes.

  In the software, select the option print.
  Select the appropriate printer name, and then click Properties or preferences.
  Select the paper/quality tab.
  Paper size, make sure it is selected on the correct size.
  Paper type, set it to envelopes.

  Then try and print again.

  I have provided this printer's specifications. HP LaserJet Pro 100 Color MFP (M175a and M175nw) product specifications. Under paper management it is the envelope formats supported.

  This paper presents how to load envelopes and the types of envelopes supported in a Laserjet Printer. (the wrong kind can get stuck inside the unit) Loading paper and envelopes.

  This document is intended to solve problems of quality Print. Follow the steps described in the paper to see if we can solve this problem. Print the diagnostics page, perform cleaning again and also to calibrate the printer.

  You have the impression of problem even on letter-size paper?

  You use Genuine HP Toner?

  Let me know the results, if you have any other questions please.

  Thanks for posting on the HP Forums.
  Good day!

• Office Jet 6600: How to print black with color ink run out?

  How can I print black with color ink are empty? (I have gone to properties... black and white only... and allow black ink only a few times, but I get the options for onlinr purchases, cancel printing or help.)

  When I click on it help States I can print with the depleted cartridges, but it doesn't tell me how. Can someone please?

  Hello

  For your printer, it is only possible to print only in black when the other cartridges are exhausted.

  If you want to know more about it please check the document below

  http://support.HP.com/us-en/product/HP-OfficeJet-6600-e-all-in-one-printer---H711a/H711g/4322968/model/4323587/document/c04331666

  Thank you

  I am an employee of HP, these messages are consistent with my knowledge and HP is not responsible.
  By clicking on the star of congratulations in the post helped you to say thanks.
  Please indicate the position that solved your problem as accepted Solution

  I work for HP

• How to print envelopes on hp4620? ERR message is 4620 only prints on paper 11 "

  "HP officejet 4620 rejects envelopes w/err message"only draws on 11"paper".  I use Windows Vistas os

  Hi loud.

  Welcome to the HP Support forums.  I understand that you encounter an error when you try to print envelopes using your printer Officejet 4620.

  The steps on how to load envelopes, then print to them be found in your user's Guide.  There are instructions for Windows and Mac.  "Printing on envelopes" starts at the bottom of page 32 and continue on page 33.   You get the error message makes me believe that the correct paper type was not properly chosen via the software program you use and the instructions in the User Guide should help you solve the problem.

• How to print envelopes from word 2010 on a HP Officejet 6700?

  A very simple and stupid question, I guess. What is the best way to load envelopes for printing on an Officejet HP6700? Thank you. When you load the envelopes?

  Hello

  Please see the link below for how to load envelopes.

  http://support.HP.com/us-en/document/c03069089

  To print from Word 2010

  Open Word > click Mail tab (top) > select envelopes > enter address > Print. (Default envelope size is 10 to change click options and change the size accordingly)