How to recover the autocad AutoSave file?

Similar Questions

• How to recover the lost psd file?

  I did an image or a photo in adobe photoshop for 10 hours. I have called and their color, and it was perfect. Yet, while I kept it. my adobe close suddenly and as I checked, it was not justified. IM depressed so please help, I have also heard that there's this temp folder to recover these things, but I could not find. Help, please. answers are highly appreciated.

  Hi, Yuukijin.

  You run Photoshop CS6? If so, the next time you launch Photoshop, a backup automatically saved perhaps open with her. File recovery, "Recovery" usually located on your Scratch disk, but files do not remain on this issue forever. They are just there in case of accident.

  I hope this helps.

• How to recover the contents of files for review using IDOCSCRIPT?

  Hello
  
  I checked - in a file at the Complutense University of MADRID. It has 5 revisions. Now, I need to read the contents of these files using IDOCSCRIPT of the CSST. I used the below code to get the file content individually, however when I talk about last revision made (that is, the revision number 5) his works very well. But when I talk to revisions (i.e., 4,3,2,1) its not to go for the content of the file.
  
  < html >
  < head >
  < title > Search < /title >
  < / head >
  < body >
  < $if not QueryText$ >
  * < $QueryText = "< match > fact '" & a & "'" $> *.
  < $endif$ >
  < $executeService ("GET_SEARCH_RESULTS") $ >
  < ul >
  < $loop SearchResults$ >
  < = getTextFile () $fullDocument$ >
  < h1 > < $dDocTitle$ > < / h1 >
  < div > < $fullDocument$ > < / div >
  < $endloop$ >
  < /ul >
  < / body >
  < / html >
  
  Any suggestions please.

  Research such as the GET_SEARCH_RESULTS services work only with the current revision.

  If you want to get the metadata of other revisions, use DOC_INFO - if you did, it will find it immediately.

• How to recover the Folder.000 of .chk files

  Hello

  How to recover the Folder.000 of .chk files

  Thanks and respect

  G.Manjunath

  There are recovery utilities that can help you recover these .chk files:

  http://www.ericphelps.com/uncheck/
  Recover CHK files

  http://www.Raymond.CC/blog/archives/2008/01/07/how-to-recover-chk-fil...
  How to recover CHK files created by CHKDSK and SCANDISK

  John

• I don't remember the password to a locked PDF file.  How to recover the password?

  I don't remember the password to a locked PDF file.  How to recover the password?

  Hi Ihatepasswords,

  We don't have an option to recover the password or reset the password from the PDF file.

• How to recover the database when archive some of the log file are deleted.

  I am facing a problem with the Oracle database, which is linked to archivelogs.
  Our development database is running in archivelog mode, but we don't have safeguards and have no recovery catalog.
  When the database was in running, disk got full, so some archivelogs were deleted manually.
  After that they have restarted the DB, and DB now not come. The errors are as follows:
  
  -------------------------------------------------------------------------------------------------------------
  
  
  SQL > startup
  ORACLE instance started.
  
  Total System Global Area 1444383504 bytes
  Bytes of size 731920 fixed
  486539264 variable size bytes
  956301312 of database buffers bytes
  Redo buffers 811008 bytes
  Mounted database.
  ORA-01589: must use RESETLOGS or NORESETLOGS option of database open
  
  
  SQL > alter database open resetlogs;
  ALTER database open resetlogs
  *
  ERROR on line 1:
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  
  
  SQL > recover datafile ' / export/home/oracle/dev/ADVFRW/ADVFRW.system'
  ORA-00283: cool cancelled due to errors
  ORA-01610: recovery using BACKUP CONTROLFILE option must be
  
  
  SQL > restore database using backup controlfile;
  ORA-00279: change 215548705 generated at 2008-09-02 17:06:10 needed for thread
  1
  ORA-00289: suggestion:
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00280: change 215548705 thread 1 is in sequence #1107
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  /export/home/Oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.arc
  ORA-00308: cannot open archived log
  ' / export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
  ORA-27037: unable to get file status
  SVR4 error: 2: no such file or directory
  Additional information: 3
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL >
  
  -------------------------------------------------------------------------------------------------------------
  
  
  1 how to recover the database and put online
  
  Any help will be much appreciated.
  
  Regarding
  Hemant Joshi
  
  Published by: hem_Kec on 7 Sep 2008 09:07

  Hello

  It is actually quite easy.
  We knew that Oracle was looking for logsequence 1107. There is no archived log, it was deleted, or it has never generated. As you delete files, the 1st solution would be possible, BUT as there was only an instance crash so more old archived logs is not required for crash recovery. There is a need during the restoration of the old backup files, which is not our case.

  Thus, the missing log sequence has not been archived = > it is a redo log.
  To identify the required online redo log, we just to log query v$ as I suggest.

  Once the log identified file, we can recover it by specifying the redo log when you ask logsequence 1107.

  And it is on. We win! :)

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• How to recover the complete installation of NDK IDE SDK?

  I just downloaded the gold 10.1, my NDK 10.0 and 10.1 in the same place. I have not updated my device and the IDE does not compile because the target device has older software.

  Now, I want to know how to recover the SDK outside of a full installation of QNX IDE. I just need an IDE if I could use several software development kits, and the IDE itself must have consumed a lot of HARD disk space.

  I like to keep the SDK installers so I can install them even without an internet connection (if I have to in the future). Someone can tell me how to recover (only the development kit) SDK full QNX IDE install and use with IDEs installed?

  I noticed that in the advanced SDK properties, there are two folder paths: Tools SDK and the Platform SDK. Can I copy these two files and use them also?

  If you still have the copy of the previous version of the sdk (two files 10.0 installation directory, host_10_0_10_536, and target_10_0_10_672 example), and if you are on Windows 7, you can copy these two files to the 10.1 installation directory and go to C:\Users\\AppData\Local\Research In Motion\BlackBerry Native SDK\qconfig and play a bit with .xml files that match the target sdk 10.0 (just in) change these two folders location paths).

  If you do not have a copy of them, the best solution is to click on the refresh icon and install the sdk that corresponds to your os from the target device.

• When one of the contolfile is corrupted so how to recover the controlfile?

  When one of the contolfile is corrupted so how to recover the controlfile?

  Simply copy another control on your database to a file simply paste in the location of the corrupted controlfile.

  or

  Manually re-create the control file

  SQL > STARTUP NOMOUNT
  SQL >
  CREATE CONTROLFILE REUSE DATABASE "orcl".
  NORESETLOGS [archivelog/noarchivelog]
  MAXLOGFILES 5
  MAXLOGMEMBERS 3
  MAXDATAFILES 10
  MAXINSTANCES 1
  MAXLOGHISTORY 113
  LOGFILE
  GROUP 1 ' path to the REDO01. LOG' SIZE xxxM,
  GROUP 2 ' path to the REDO02. LOG' SIZE xxxM,
  GROUP 3 'path to the REDO03. LOG' SIZE xxxM
  DATA FILE
  "the data 1' SIZE xxx file path,
  "path of the file of data 2' SIZE xxx,
  "path of the data 3' SIZE xxx file,
  .
  .
  .
  .
  .
  .
  .
  "path of the data file n ' SIZE xxx,.
  ...
  GAME CHARACTERS [characater_set];

• How to recover the deleted table

  Hai
  
  How to recover the deleted table

  the IMP log = = file tables =

  fromuser =' 'touser =' '
  are you new on s/n? (Sorry for the request this because you asked the steps to import a single table). If you read the docs of oracle, you would have not asked this question

  Kind regards
  Pavan
  http://pavandba.WordPress.com

• Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  Previously, during display of the image (photo) in the tab, it displays the resolution of the image, how to recover the photos (pictures) display resolution?

  You bring up the title bar via the "Title bar" button at the bottom left in the palette to customize window

  • Firefox menu button > customize > title bar
  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox

  

  See also:

  • https://support.Mozilla.org/KB/how-to-make-new-Firefox-look-like-old-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• How to recover the sparsebundle workspace?

  Hi all

  EL Cap 10.11.5

  I made a my.sparsebundle which was for 2 GB

  - then I almost filled

  - then I deleted 50%

  - then run the Terminal command

  -Recovered 0 bytes

  -so I've removed everything inside and running the command again

  -always it recovered 0 bytes

  Q How do this work?

  -------

  How to recover the sparsebundle workspace?

  I went to the terminal and type:

  hdiutil compact /Users/me/Documents/my.sparsebundle

  and he succeeded, but said regenerated = 0 bytes of 48.9 MB possible.

  s http://blog.fosketts.NET/2015/07/22/how-to-use-Mac-OS-x-sparse-bundle-disk-image.

  rse-bundle-when-hdiutil-compact-is-not-e http://Apple.StackExchange.com/questions/54607/completely-recover-space-from-Spa...

• How to recover the password for AirPort Extreme in ipad

  How to recover the password for the ex airport in ipad

  Use your Keychain Access iCloud, if you create a.

  Frequently asked questions about iCloud Keychain - Apple Support

  Soft reset the airport and you can connect for 5 min and recover the passwords.

  Reset to a base station AirPort FAQ - Apple Support

• How to recover the bios password hp mini 110-1144NR cnu938553m

  Help, please

  Need help how to recover the bios password hp mini 110-1144NR

  Series # cnu938553m

  Hello

  What is the code stopped? Please try (all in small character):

  e9lofuqqf4 (3rd tank is a tiny character of the letter L).

  Kind regards.

• Compaq mini 110 c - 1020st: how to recover the password of bios compaq mini 110 c.

  How to recover the password of bios compaq mini 110 c.

  S/N: [personal information]

  P/N: NZ794EA #AB8

  Hello

  Enter: e9lo7qxd7a (3rd character is a lowercase L)

  Kind regards

  DP - K