How to register a DLL file?

Similar Questions

• How to register as "eps" file original size?

  I have the size of the eps = 2 MB file: Dropbox - test.eps

  But I open it and "save under" other name: = 36MB file size

  Why? How to register as "eps" file original size?

  The content is an image with a clipping path.

  That you are editing in Illustrator?

  If you want to change this eps, it is preferable to use Photoshop.

• Registering a dll file to start the service HID Input Device

  Hello

  I would like to register the dll located in my System32 hidserv.dll. However, when you enter the command 'regsvr32 hidserv.dll' I have an error message indicating that: "hidserv.dll was loaded, but the DllRegisterServer entry point was not found. This file cannot be saved. "

  How I then save it, knowing that I checked that this file is not corrupt?

  I need to register this dll in order to start the "HID Input Device" who stubbornly refuses to start despite an integrity check in the registry.

  The system event viewer specifies that:

  "HID Input Service service terminated with the error:
  Error 126: The specified module is not found. "

  I already tried to extract hidserv.dll, mouclass.sys & mouhid.sys sp2 and sp3 even to put them in the C:\Windows\System32 directory, but I had no change.

  The files I have place in my SYSTEM32 have the following version:
  Hidserv.dll: 5.1.2600.5512
  Mouclass.sys: 5.1.2600.5512
  mouhid.sys: 5.1.2600.0

  but the service still does not start even after rebooting. The 126 error continues. Is there other files to extract / expansion?

  I checked the integrity of all stakeholders key in the registry (for example, to have the "ServiceDll" key whose value is "% systemroot%\System32\hidserv.dll" in the settings of the service HIDserv ControlSets), but nothing more.

  I give you an export of the current CS:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ]
  "DependOnService" = hex (7): 52, 00, 70, 00, 63, 00, 53, 00, 73, 00, 00, 00, 00, 00
  "Description"="allows generic inbound access to the user interface devices, which activate and maintain the use of the active buttons preset on the keyboard, remote controls, and other multimedia devices. If this service is stopped, the normal controlled active buttons not of will operate this service don't. If this service is disabled, any services dependent on explicitly will not start. »
  "DisplayName"="HIDDEN Service entry.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000020

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" = hex (2): 20, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Enum]
  "0" = "Root\\LEGACY_HIDSERV\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  By analyzing the Observer newspaper of events more deeply, I could identify the date on which took place the first concern. The problem is dated, 18/08/2010 at 11:59:17 (it sticks with the conclusion of the first concern of losing control of my volume on my Logitech G110 keyboard also control buttons). I don't remember having a particular to this date on my system change, except perhaps a Windows Update automatically.
  I could not try a system restore, knowing that the RP oldest I have is dated 20/08, so downstream of the original problem.

  I ran a File Checker sfc/scannow system with my Windows XP Pro SP3 (current version of my system) installation cd. I've been thinking about it since a cd to install Windows XP Pro SP2, but better is worth twice more than once. I also realized a CheckDisk, but these two operations have not changed the problem.

  You will find export of address following my diary of events on the system.

  I have completed all of the tasks (start, replacement dll, see registry, SFC,...) while logged on sessions 'standard user', 'administrator' and even as a 'SYSTEM' (NT Authority), but in none of these configurations, it was possible for me to start this service. If I come to you, is precisely to avoid passing through a repair using the cd which would have made me lose a lot of time. I don't usually do the use of support services, in general the case has already been handled and the response or similar cases are on the web. But now I feel like in front of a technical impasse. I appeal to your specific skills to do what is necessary for good service restarting without using a remedy that eventually a reinstallation of the system.

  It you want to check my configuration, you can find it here.
  If you need more information, feel free to contact me. I would be happy to answer them.

  Until then, thank you very much. Kind regards.

  Arnaud TIERANT.

  First of all, the hidserv.dll is not a DLL that can be recorded.  You can try all day long, but it will not be because he is not on the list of DLLs that will be or must be registered.  There is a list, and which is not on it.  (well thought of).

  Your problem is in the registry with the HidServ, section ServiceDLL parameter.

  You have a space left in the key ServiceDLL.  In regedit, it should look like this:

  %SystemRoot%\System32\hidserv.dll

  Yours probably looks like this in regedit:

  %SystemRoot%\System32\hidserv.dll

  See the space left?  I don't know how it got that way (perhaps something that was installed for these humans), but I know that if I put a space in front of me and restart my system, HID service not start and give me an error 126 as you describe.  He has no idea about the problem in the log events.

  With space on the left, the specified module really not found because there is no such thing as the path (with the space to the left).

  Your registry export reveals this problem.

  Yours looks like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 20, 00, 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  It should look like this:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HidServ\Parameters]
  "ServiceDll" =hex (2): 25, 00,53,00,79,00,73,00,74,00,65,00, 6 d, 00, 52, 00, 6f,
  00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 00, 32, 33, 00,------.
  5 c, 00, 68, 00, 69, 00, 64, 00, 73, 00, 65, 00, 72, 00, 76, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00,------.
  00

  In your, you can see I have stuff in bold print on the front of the chain: 20.00...  In hexadecimal, is a space and a null value (null value is correct).  You must use regedit to get rid of this leading space (20 hex), and don't forget that, in the settings section, the first character of the value ServiceDLL is the % sign (which is a hexagon of 25).

  You can, of course, just change the string, delete everything that is there, and retype the value if it looks like this without spaces attack/crawling:

  %SystemRoot%\System32\hidserv.dll

  The HID Service will not start if you come to make the changes and try to start the service.  After making your changes, you need to restart, you can check it out, and then start the service HID.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to replace missing Dll files

  How to replace dll files? Win 7

  If it's a windows dll, then you need the installation cd, insert the cd, use search in my computer, advanced

  Search, locate the .dll file move it to C:/windows player. Windows should install auto

• How to remove a dll file? It keep the pop ups indicating that I have to close my Windows Explorer.

  YouSendIt file downloaded all the time, then when I want to remove it from my computer, the dll file could not be uninstalled. Then always have windows pop up stating that I need to close Windows Explorer in order to install the file.

  Please advise...

  Hello

  1. What is the name of the dll file?
  2. YouSendIt is a file or application that you downloaded?
  Method 1:
  See the link, then run the Fixit to completely uninstall the program. Check if the problem still persists.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 2:
  See the link, download the security scan and run.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx
  You can also run the malicious software removal tool. Check out the link:
  http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
  Note: Incase viruses are found, the scan can chose to put the file in quarantine, or delete it so as a precaution, backup files before you run a security scan.

• How can you un register a dll file?

  Vista OS 32-bit Home Premium Vista SP 2

  Here is an explanation of Regsvr32 http://support.microsoft.com/kb/249873

  Use the /u switch to cancel the registration of a file.

• How can missing hpfud50.dll file I install my printer?

  My OS (windows Xp) has the printer - name brand and product list. When I try to install my HP printer, is not able to complete the load because he keeps asking the missing cd-rom drives. and it seems this dll.

  Hi rusty84,

  1. What is the full and exact error message?

  2. What is the number of the printer model?

  3. you remember to make changes to the computer, after which the issue started?

  4 What is a shared printer or a local printer?

  I suggest to download the drivers for your HP printer on the HP website , then try to install and check if it helps.

  Reference link:

  Printer in Windows problems

  I hope this helps.

• How o Add a Dll file for windows Vista 32 operatin

  I am trying to install a RC Simulator. I have installed the FMS software but in order or workd to install a fileD3dRM.dll. Any help would be appeciated.

  Thank you

  Hi Jacksutherland,

  1. what happens when you try to install the RC Simulator?

  2. you receive an error message/code?

  Update Microsoft DirectX. DirectX is a software technology that allows to create Visual effects and audio special that come with games. Many games rely on DirectX to help improve your computer's performance. Make sure you have the latest version of DirectX, so that you can take advantage of all the latest features. For more information, ensuring that you have the latest version of DirectX, see which version of DirectX is on your computer?

  If the problem persists, I suggest you also to the support professional technique contact Flight Simulator X.

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/ContactingTechnicalSupport.aspx

  It will be useful.

• How to register multiple files with the same name with different num revision

  Hello
  
  Can someone please tell me, how to register several different files with the same name with the revision number using the RIDC API.
  
  For example:
  First of all I will be saved in a file (TestFile.txt) in a content server with revision number 1 using the RIDC API in application of the ADF. Then after awhile, will change the same line (TestFile.txt) check-in and once again. I tried to check the same file several times, however first Check-in correctly in server showing revision 1, so that Check-in same file again, her gives no error message, and also its not reflecting only not to the server. Single file (TestFile.txt) reflecting on the server.
  
  How to implement this feature using the RIDC API? Any suggestions would be helpful.
  
  Concerning
  REDA
  
  Published by: 887680 on March 6, 2013 10:48

  (1) get the content ID (dDocName), call CHECKOUT_BY_NAME
  (2) call check-in service with dRevLabel = previous dRevlabel + 1

• Windows 8 - save the .dll files

  Original title: salvation

  Hi I tried to register the dll files to cmd, but some of them gave me an error 0x80070005 so how can I fix in windows 8

  Windows key + X and select command prompt (Admin), then you will have administrative approval.

• Can I download dll file Fixer? How can I fix it. DLL files?

  Scan with Fixer of DLL file shows the damaged DLL files. Can I have a free download for DLL file Fixer?

  Hi, SunilKamath,

  Windows operating system, please.

  Are you receiving error messages?

  Start > type CMD

  If you use Windows XP, press enter

  If you use Windows Vista or Windows 7, right click on the CMD window, and then select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  You might your support to Windows Setup during the scan if there are missing or corrupt files therefore have the CD handy.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Diagnose and repair files of Windows and problems of files automatically - Mr. Fixit

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• How can I register several OCX files at the same time

  How can I register several OCX files at the same time. OCX depending on the application files are stored in a network location, IE. R:\HR\whatever\whatever\*. OCX instead of manually record each ocx file, I would be with a simple batch file or an automated script. Anyone have any good ideas?

  Hi James,

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in following the link MSDN forum

  http://social.msdn.Microsoft.com/forums/en-us/categories

• just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  original title: Please help

  just reinstall my xp I had to jump the Msxml6.dll file and c:\windows\system32\mucltui.dll.MUI how to fix?

  Hello

  1A Windows XP installed properly on your computer?

  2. If it is installed, you face any problem with Windows XP?

  I suggest you try the methods mentioned below and check if it helps:

   

  Method 1:

  Try to do a Scan SFC (System File Checker). The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type: cmd.exe in the search results.
  (c) right click the cmd.exefile and select 'run as administrator '.
  (d) in the CMD window, type:sfc/scannowand press the Enter key.
  (e) restart and see if that solves the problem.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Hope this information is useful.

• How to reverse change how open .dll files?

  How to reverse change how open .dll files? I changed accidentally, trying to open only ONE file, most of them to open with Microsoft Picture It! software and now some things do not load, and my USB ports are completely useless!  Help. How to reverse this mess? OR should I simply delete all these and download replacements? A lot of new files that I downloaded automatically changes in Pic! icons, once that they finish downloading... - and I cannot restore, because he says that nothing has changed.

  Thank you!

  Hello

  I suggest you follow the steps mentioned below.

  Method 1:

  I suggest running the fix that is present in the link mentioned below and check if the problem is resolved.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 2:

  If the problem started recently, so, I suggest you do a system restore and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.