How to reinstall a Note on Eqiuum A100-147

Similar Questions

• USB 2.0 Bluetooth DEVICE NOT RECOGNIZED - Equium A100-147

  Hi all!!!

  I have posted b4 about my problems of BT, but still no further forward.

  I have a 2.0 usb toggle universl BT, my last worked well until it broke.

  Since I had xp pro installed, but my USB does not recognize my rocking do not even have a pop up? any ideas.

  When I plug it 3 fast Dong

  Unplug and made 2 Dong

  I tried to install the drivers usb, but nothing.

  do my head now... Please someone help me resolve this issue!

  As far I know Equium A100-147 doesn t support the internal BT module and so if it was not equipped with the BT Toshiba stack.

  If you use an external 3rd party module BT, then you should check if there are drivers designed specially for this external BT dongle.

  Also, check if the BT dongle would be recognized in the Device Manager.
  If there is no dongle BT listed in the list of devices, then remove all controllers and hubs of UBS in the list and restart the device.
  After rebooting again Win XP should initialize the USB ports again and then you try to plug the dongle BT again.

  Good luck

• After the BIOS does not update Equium A100-147

  Can someone help me please?

  Updated my BIOS as recommended it using the windows tool! Everything went through fine, saved, verified and flashed the new version. After restarting auto as my laptop does not start before the Toshiba screen, press F12 and nothing, F2 and I just get PLEASE PATIENTER. Guess I didn't try Visa or in fact any OS now.

  Why oh why I did it? Everything was fine before, but advises him to do for full compatibility. Do I need a new Board of directors or is there a key, I can press on to able me to boot from CD to reflash or return to old BIOS?

  Help, please!

  I always say: do not touch the system running well!

  Anyway, in your case, something goes wrong with the BIOS update and you need to go service authorized in your country. They can help you. Sorry but there is nothing that you can do it alone. The BIOS feature is a very sensitive matter and if the BIOS chip is faulty now you can do nothing to make it work again.

  I'm sorry. :(

• How do I reinstall the Hotkeys on Satellite A100

  I lost my A100 shortcut keys.
  Can someone tell me how to reinstall or to operate again.
  for example. When I pres fn / f3, he should go to standby mode, but it evokes windows desktop search...
  I'm puzzled.

  Help me pleeeeasse!

  Graham

  Hello

  I assume you are using the Windows XP operating system.
  Visit the Toshiba drover page, choose your phone model and download and reinstall the Hotkey Utility and common modules.

  All that s

• My Hp Pavilion dv99110 us Keeps giving me a message that my webcam device is not found. It came with a built-in webcam and I do not know how to reinstall! Help, please!

  It came with a built-in webcam and I do not know how to reinstall! Help, please! I don't know when it happened because I deliberately it

  Hello

  Make sure that you have the latest drivers and software for your machine

  http://WWW8.HP.com/us/en/support-drivers.html

  If necessary, try HP support

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  or ask in the Forums of HP Support

  http://h30434.www3.HP.com/

• I'm creating a PC crashed - upward and can not find how to reinstall lightroom who was already sitting on my PC (download and activate - activation key)?

  I'm creating a PC crashed - upward and can not find how to reinstall lightroom who was already sitting on my PC (download and activate - activation key)?

  do not find for example former E-mail send me a code of activation or smth like that...

  . m.

  If you have registered the software when you initially installed, then you might be able to find the serial number on your Adobe account online.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Adobe cloud will not reinstall and will not update? How to reinstall without uninstalling the master suite?

  Please refer to:

  • Download and install apps Cloud Creative
  • Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
  • Download and install apps Cloud Creative
  • Re: Should uninstall us cloud creative cs6 before installing the cloud creative cc?

  Concerning

  Baudier

• I just got a new hard drive and restored from Time Machine - CS4 apps will not open. How to reinstall or upgrade the license?

  How to reinstall or upgrade my license?

  We still all drives, box and documents

  Thank you for the presentation of reports. I am pleased that you are facing up and running.

  Guinot

• It is not my eyedropper tool in the toolbar. Where did it go or how to reinstall?

  How to reinstall the missing eyedropper tool?

  Click and hold on the color theme tool.

• Can't find the search box of google on the right side of the toolbar. He disappeared and I can't find out how to reinstall

  Have studied all the proposals help from firefox without success. Google search box on the right side of the toolbar of the web browser disappeared and can not figure out how to reinstall.

  You can't find it when you click on the Menu button top-right, then on 'Customize' below?

• Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

  How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

  (I do not installed new HARD drive yet, but I intend)

  Hey Buddy,

  You have created the Toshiba Recovery disk? Perfect!
  After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

  > How to access password protected data after relocation?
  It would be interesting to know what data you mean exactly.
  Before you reinstall Windows, you must back up all data on a disk for example external HARD.

• Satellite L450 - How to reinstall Windows 7?

  I have a Toshiba Satellite L450, which has Windows 7 preinstalled. It doesn't have a recovery partition, and no disc don't came with the laptop. No older installation point have been created.

  So, how can I do to reinstall Windows 7 I want a new facility to remove performance issues. Where can I get the media? I do not wan to spend £200 + to purchase something which was already pre-installed!

  Concerning

  Steve

  Hi Steve,.

  > So, how can I do to reinstall Windows 7
  First of all I recommend you read the user manual. It can clearly answer your question how to reinstall Windows 7.

  If you have more questions, just after again. ;)

• Satellite 2450: How to reinstall Windows XP Home edition on an existing partition recovery disk?

  Hello:

  This question has been asked before, but the answer is the following:

  On this forum you can use the option search advanced solutions if someone writes about this before.

  Anyway check this please
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2513&TSTART=125

  I checked this and it gives an answer how to create a partition, but not how to reinstall xp in drive c from the recovery disc.

  There is the choice to go to the expert, but once there, I have no idea what to do. A lot of possible settings, but nothing to say how to reinstall xp without annihilating all other readers.

  Thanks for any help

  Hi tw,.

  the manual described Expert in Quad mode to your link is normally the right!

  I did this procedure several times and it worked perfectly!

  Try again once I am sure that it will work

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• How to reinstall in recovery mode?

  Hello... I got elcapitan and 10 installed but windows to free up disk space (too many music files) I deleted the content of the macosx with disk management in windows... now I have no use for music files... .and I opened with pressing alt it is recovery mode... but when I try to reinstall elcapitan on internet it shows my Bootcamp drive (which has windows) and a recovery partition (which is 650 MB)...

  Now I have a 160 GB hard drive partition which was before music files is not visible...

  In addition, I can't install macos to bootcamp, because it's blocked... I looked some discussions... the logging option is greyed out...

  And, worst of all, my optical drive is broken... How can I install elcapitan in these circumstances?

  Any help would be appreciated

  .. .İ have a 2009 model macbook, 160 GB HD, 2 GB ram

  Hello there, murat119.

  Looks like you're wanting to reformat the hard drive on your MacBook. The following Knowledge Base article offers up different options available for you:

  How to reinstall OS X on your Mac

  Wipe your drive and install OS X

  Generally, you don't need to erase your startup disk to reinstall OS X. The OS X Installer is designed to allow you to perform an installation in place during the same version or earlier versions of Mac OS X. If you transfer your Mac to a new owner, you can clear your integrated boot disk before you reinstall OS X.

  Important: Before you remove and reinstall, back up your important files. If you are using a MacBook, MacBook Air or MacBook Pro, make sure that the power adapter is connected and plugged all by performing the following steps.

  You can use these measures to erase files on your startup drive and install a fresh copy of OS X:

  1. Before you begin, make sure that your Mac is connected to the Internet.
  2. Restart your Mac. Immediately hold down the command (⌘) keys and R after having heard the startup sound to boot into OS X Recovery.
  3. When the recovery window, select disk utility, then click on continue.
  4. Select the volume name back from your startup disk in the left side of the disk utility window, then click Delete.
  5. If you want to erase the disc safely, click Security Options. Select an erasing method, and then click OK.
  6. On the Format menu, choose Mac OS extended (journaled). Type a name for your drive, and then click clear.
  7. After that the drive is deleted, close the disk utility window.
  8. If you are not connected to the Internet, select a network in the Wi-Fi menu.
  9. Select the option to reinstall OS X.
  10. Click on continue and follow the instructions on the screen to reinstall OS X.

  Additional options

  If you want to reinstall the version of Mac OS X included with your Mac, or if you have to reformat your entire startup disk, press Command + Option + R to start instead. This starts your Mac recovery of the Internet.

  If you have more than one partition (like Boot Camp) and you want to delete the complete startup disk, you can use disk utility to remove the partitions or re-partition your hard drive. Start up your Mac in recovering from Internet, then use utility to repartition your boot disk drive until delete you it. Make sure that you back up important data from all partitions before repartitioning of a disc.

  Thank you for being a part of the communities of Apple Support.

  See you soon.