After the BIOS does not update Equium A100-147

Similar Questions

• Control buttons do not work after the new installation OS on Equium A100-147

  After Installing Win XP manually, I am facing problem for the multimedia keys on the left side of the laptop work.

  I am able to access the first button to launch Internet Explorer and Windows Media Player but still keys Play/Stop / > /.< not="" working="" with="" windows="" media="">

  I read in these forums that these keys work only with WinDVD or Windows Media Player with CD/DVD in. But I was able to use these keys with MP3 files in Windows Media Player.

  I don't want to use the restore CD.

  Thanks for your reply.

  Hello

  Of course you can use it with mp3 files. The files are probably listed in the WMP library, and you can use all of the buttons. There is nothing unusual.

  If you cannot use all those buttons in WMP when music CD is in the drive or you if the WMP library is open I recommend you remove TOSHIBA controls reboot the device and install again. Maybe it will work again.

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• the computer does not update the version of Itunes 12.3

  the computer does not update the version of Itunes 12.3

  If your version of Mac OS X 10.6.8 (as shown in your profile information), the latest version of iTunes (12.3.2) requires OS X 10.8.5 or later version.  If an OS X update is required if you run iTunes 12.3.  Your specific model of MacBook Pro determines the supported versions of OS X.

  If you select about this Mac from the Apple menu, click more information, the "model identifier" would help to identify your MacBook Pro model.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Satellite Pro 4220 - update the BIOS does not start

  Hello!

  Please, someone tell me what is the problem with the update to v1.60 SP4220 BIOS? It does not start even do it according to instructions.

  I did the following:
  1 download/have unzipped the package v1.60 since the BIOS page on a non-bootable floppy disk empty
  2. put the floppy in the computer
  3. turn on the device with the F12 key

  With a floppy, I got the "non-system disk" error and another with a "EMBRL" error message missing. What is it, I'm not familiar with that one?

  Best regards

  Pete v.

  Hello

  Can I ask why you want to update the BIOS?
  You have problems?
  If the laptop works well the update of the BIOS is not necessary! My laptop is about 6 years old and I have no day BIOS!

  However, I think that you didn't use the right update procedure.
  Please check this document before starting the BIOS update:
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

• USB 2.0 Bluetooth DEVICE NOT RECOGNIZED - Equium A100-147

  Hi all!!!

  I have posted b4 about my problems of BT, but still no further forward.

  I have a 2.0 usb toggle universl BT, my last worked well until it broke.

  Since I had xp pro installed, but my USB does not recognize my rocking do not even have a pop up? any ideas.

  When I plug it 3 fast Dong

  Unplug and made 2 Dong

  I tried to install the drivers usb, but nothing.

  do my head now... Please someone help me resolve this issue!

  As far I know Equium A100-147 doesn t support the internal BT module and so if it was not equipped with the BT Toshiba stack.

  If you use an external 3rd party module BT, then you should check if there are drivers designed specially for this external BT dongle.

  Also, check if the BT dongle would be recognized in the Device Manager.
  If there is no dongle BT listed in the list of devices, then remove all controllers and hubs of UBS in the list and restart the device.
  After rebooting again Win XP should initialize the USB ports again and then you try to plug the dongle BT again.

  Good luck

• I can't install the driver of Ethernet for Equium A100-147 tower controller

  I have downloaded the driver from Toshiba Web site LAN, but it does not work on my computer laptop Satellite A100-147 (PSAABE).

  What will I do to fix this?

  Can you explain exactly why his does not work?

  The driver gives an error during installation?
  The driver will install ok, but the LAN does not work?
  You get a BSOD?

• Satellite Pro U500 - update the BIOS does not start on Windows 7

  Try to update BIOS on Satellite Pro U500 PSU9CA. The download site says there is a new version available, after that download and run the program nothing happens. You can see the Winflash process in the Task Manager but it never appears"". If this has yet been tested by Toshiba?

  There are no instructions, no readme or whatever it is.

  Did somebody get the BIOS update?

  Hi torana.

  As far as I know Toshiba always test their drivers or updates tools before they will be released and I have never had a problem with the new updates, so I think that the problem is lreated to your laptop, maybe something wrong with your installation.

  In General before you start the update of the BIOS you have to decompress all the files in archive zip and launch the update as an administrator.
  Also make sure that the value added package is installed and no firewall is not blocking the update program.

• Workstation HP Z230 - update of the Bios does not, cannot restore bios

  OK, I've updated the bios, when he was busy just updating the screen went black. I left it for an hour and no change.

  Restarted the PC and it does not display anything, the Start button is now red and it beeps 8 times then start button goes blue for a while then red and beeps etc.

  Judge: (nothing has worked so far)

  1 according to the bios reset button

  2 download the lates bios update and tried to install the DosFlash via USB

  What else can I try? Thank you

  OK, problem solved. I eventually copied back Flash files on cd, machine to rebooted and it worked.

• Satellite C660 - lag keyboard and the update of the BIOS does not install

  Hi all

  Having the Satellite C660 with keyboard lag problem has tried to update the Bios, but after downloading the Bios from the site web of Toshiba and running that a message says already installed Bios is a newer version and install it with now cancel.

  Can anyone help?

  Pilot

  Can you please tell us what model C660 you exactly (C660-xxx) and what version of BIOS?
  Please check in the BIOS settings.

• update the BIOS does not have: do not meet the prerequisite code 9994/9996

  BIOS update failed: did not meet requirements code 9994/9996 / model ny801av-aba HP Pavilion p6100z cto Desktop windows vista basic version of the bios 5.38, published on 20/03/09. 4 GB of ram (3.5 usable) AMD semperon - 1300 socket am2 + name code sparta.  Update BIOS of motherboard M2N68 - verision 5.49 released on 24-08-09 (am trying to go to a concert of triple-core AMD phenom 8400 2.1 it is why I am updating the bios, when I put it I have nothing).

  Figure 1: Error Message

• Tecra A10 - update the BIOS does not work on Windows 7

  Upgrade the BIOS for TECRA A10/M10 and Satellite Pro S300/S300M to v1.90 version using P0065v190.exe (bios 20090304141534) fails with the message:

  "The [error] BIOS update is not taken in charge of operating system. No support for operating system or service pack is installed. »

  Note: Running as Administrator returns the same error.

  Probably Windows 7 only is not supported but, it must be explicit protection since the release of Vista should work in 7. There is no update setting to jump this protection?

  BIOS update is designed and tested for some OS. Win7 is not on the market and now Toshiba offers tested BIOS updated for Vista only.
  Sorry, but what else to say. You probably know how supposed BIOS updated and it can be dangerous. So do not play with this and do not untested experimenting with such things.

  Win7 will be placed on the market in a few months and Toshiba will start a public support. You can wait a few weeks isn't it?

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• Satellite L650 doesn't work well after the BIOS 2.40 update

  Hello

  I have a L650 Psk1je yesterday, I updated my bios to 2.20 to 2.40 and since then my laptop does not work well
  can someone tell me please how to downgrade my bios to 2.20 again

  Thank you

  Downgrade BIOS can be done using only a traditional BIOS version
  These versions are not available for download.
  You can download only the latest BIOS based victory.

  But why do you say that it is not working properly?
  What s wrong?