How to run the query on load

Similar Questions

• When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  When I run a web browser immediately loaded two blank tabs. How to make the browser to load the only?

  Have you checked the home page to make sure that if is not the vertical bar (|) symbols?

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
  • http://KB.mozillazine.org/Preferences_not_saved

• How to get the query execution time without running...?

  Hello
  
  I had one condition... as follows...
  I had 3 sql statements. I need to run only sql what runtime is very less.
  
  Can someone help me, how to get the time query and run this query without using explain plan... ?
  
  Thank you
  Rajesh

  I can't think in any way at all to get the query execution time without running the query.

  You might get an estimate ( approximation ) If you are using explain plan.

  But you have governed to explain plan for a reason, so I can't help you.
  Why you do not want to use don't explain plan?

• How to execute the query automatically when a query is added, Panel

  Hello

  Jdev: 12.1.3

  I added a queryPanel (af:query) on my Page. Everything works fine when I do a search.

  I wish I had the original Version to run the query that is executed automatically when loading the page. How can this be achieved?

  What I have to do this explicitly, or is it a property that I can use?

  See you soon

  AJ

  You can generate the default display criteria again, setting the mode to automatic query.

  You generate default criteria by adding each attribute to a criterion without specifying and literal bind variable.

  Timo

• How to change the programs that load when Windows starts

  In simple terms... How to change the programs that load when Windows starts?  Because my boot time is slow in arriving at my login screen!

  Download and run the "Autoruns" from Microsoft Sysinternals freeware:

  < http://technet.microsoft.com/en-us/sysinternals/bb963902="">

  It lists all programs that start at startup and allows you to disable it by simply removing a check mark.  This makes it easy to reverse in case something goes wrong.

  HTH,
  JW

• use F8 &amp; F10 keys on the keyboard to run the query and save a form

  I created a screen. Here I can save by pressing CTRL + S (written a validation key trigger) or the button Save, I placed.
  Now the user want to F10 to save & key F8 to run the query.
  How can I do? Should what trigger I write the code...
  I use oracle 10g and oracle developer suite 10 g.
  I have fmrweb.res as follows:-
  
  
  9: 0: 'Tab': 1: "then on the ground."
  9: 2: "Ctrl + Tab": 1: "then on the ground."
  9: 1: "Shift + Tab": 2: "previous field.
  9: 3: 'Shift + Ctrl + Tab': 2: "previous field.
  85: 2: "Ctrl + U": 3: "clear the field".
  38: 0: 'Up': 6: 'Up '.
  40: 0: 'Down': 7: "Down".
  33: 0: 'PG': 12: "scroll to top".
  34: 0: "PageDown": 13: "scroll."
  69: 2: 'Ctrl + E': 22: 'Edit '.
  10: 0: "Enter": 27: «Back»
  120: 0: 'F9': 29: "list of values".
  76: 2: "Ctrl + L": 29: "list of values".
  81: 2: 'Ctrl + Q': 32: "Exit".
  75: 2: "Ctrl + K": 35: 'display keys '.
  112: 2: 'Ctrl + F1': 35: 'display keys '.
  83: 2: 'Ctrl + S': 36: 'engage '.
  121: 2: "F10": 36: 'engage '.
  114: 1: 'SHIFT + F3': 61: 'next primary key '.
  115: 1: "SHIFT + F4": 62: "delete folder".
  117: 1: "SHIFT + F6": 63: 'delete folder '.
  115: 0: "F4": 64: "Double registration".
  117: 0: 'F6': 65: "insert record".
  119: 1: "SHIFT + F8": 66: "a next Recordset.
  1005: 0: 'Down': 67: "then save.
  1004: 0: 'Up': 68: "history".
  40: 1: 'Shift + down': 67: "then save.
  38: 1: "shift + up": 68: "history".
  116: 1: "Shift + F5": 69: 'clear the block '.
  116: 0: 'F5': 70: "block the Menu."
  34: 1: "shift + page down": 71: 'then block '.
  33: 1: ' shift + Pg. Prev ': 72: "previous block.
  34: 2: "Ctrl + PG. Next": 71: 'then block '.
  33: 2: "Ctrl + PG. Prev': 72: "previous block.
  114: 0: "F3": 73: "duplicate field '.
  118: 1: "Shift + F7": 74: 'clear form '.
  118: 0: "F7": 76: "enter the query."
  119: 0: 'F8': 77: 'execute the query. "
  122: 0: 'F11': 76: "enter the query."
  122: 2: "Ctrl + F11": 77: 'execute the query. "
  112: 1: "SHIFT + F1": 78: "error to display.
  80: 2: 'Ctrl + P': 79: 'print '.
  113: 1: "SHIFT + F2": 80: "request Count".
  123: 0: "F12": 81: "update file".
  121: 3: 'Shift + Ctrl + F10': 82: "function 0".
  112: 3: 'Shift + Ctrl + F1': 83: «Function 1"»
  113: 3: 'Shift + Ctrl + F2': 84: «Function 2"»
  114: 3: 'Ctrl + Shift + F3': 85: «function 3"»
  115: 3: 'Shift + Ctrl + F4': 86: «function 4"»
  116: 3: 'Shift + Ctrl + F5': 87: «Function 5"»
  117: 3: 'Shift + Ctrl + F6': 88: «function 6"»
  118: 3: 'Shift + Ctrl + F7': 89: «Function 7"»
  119: 3: 'Shift + Ctrl + F8': 90: «Function 8"»
  120: 3: 'Shift + Ctrl + F9': 91: «Function 9"»
  113: 0: 'F2': 95: "list of tab Pages.
  72: 2: "Ctrl + H": 30: "Help".
  112: 0: 'F1': 30: "Help".
  
  Please suggest...

  Hello.

  First of all check that you have set "term" among others in the variable 'otherparams' in formsweb.cfg

  For example:

  otherparams = expression = term %

  Then make sure that you put the correct path for the keyboard mapping file in the variable "term" as I wrote in the previous post.

  Things should work as I did several times.

  Best regards.

• How to block the first time loading data in the View object for the search

  Hi all
  I use ADF jdeveloper 11g 2 release. I do the search page. but I do manually, don't use ADF query Panel.
  I drag and drop the adf only read the table. It can run by using the range of time Lov and date using backing bean.
  for example: vo1.setWhereClause (whereClause);
  VO1. ExecuteQuery();
  where clause can change dynamically.
  But my table indicate vo that load all the data first time loading the page. I add all the performance tuning, but no data option is to insert only. so option can do programmatically and can run the query?
  This method I used because I cannot make the search options I want in ADF query Panel. Is there a way to add 3 options but show all fields in the table?
  hoping to help someone., thks

  change the method of isPostback() for

  AdfFacesContext.getCurrentInstance () .isPostback ();

  Then relaunch the application after a cleaning-construction.

  hope it works :)

  for your other question, seems that you deleted from your button code search clearCache() method...

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• Run the query in accordance with condition

  Oracle 10g version

  Hi gurus

  I have the following data

  Examples of data

  SELECT DeptNo FROM scott.emp

  UNION ALL

  SELECT EmpNo FROM scott.emp

  ;

  Now what I want is I want to execute conditionally of those surveyed, something like below:

  If list_item = 'I', then run below

  SELECT DeptNo FROM scott.emp

  otherwise run below

  SELECT EmpNo FROM scott.emp

  End if;

  ------

  I want to keep the union all and run the query under the terms...

  Set a long tank (max 4000)

  L_WHERE_CLAUSE

  Use it in your application as a substitution variable by prefixing with &

  WHERE & L_WHERE_CLAUSE

  Assign the value into a pl/sql block (trigger, formula column)

  IF condition THEN

  L_WHERE_CLAUSE: = '1 = 1';

  ON THE OTHER

  L_WHERE_CLAUSE: = '1 = 2';

  END IF;

  Now, among the options that have been suggested to you and the information you provided, I think the solution of Solomon should be easier. Just refer to the column list_item has a link within your query variable (assuming that this and the query where list_item belongs are related, for example, there is a join between them)

  SELECT DeptNo FROM scott.emp, t

  WHERE: list_item = 'l '.

  UNION ALL

  SELECT EmpNo FROM scott.emp, t

  WHERE nvl(:list_item,'x')! = « l »

• How to run the Extendscript .bat file?

  I have a file with some instructions .bat and I want that it runs from Extendscript.

  How to run the Extendscript .bat file?

  I tried execute(); order and it seems that .bat ran but no result, but when I double click on the .bat file all worksout very well.

  How used runtime.exec () extend the script?

  Can I communicate with Java JDK thru ExtendScript and run commands such as runtime.exec ()?

  can someone please?

  You can do it like this:

  var batFile = new File("C:\\path\\to\\my\\batfile.bat");
  batFile.execute();
  

  Note that this will only work if your system is configured in such a way that by double-clicking the .bat file runs it in reality.

  You can also use

  system.callSystem()
  

  but note that this is only available in AE.

• What is tdrc.tdrcfacade and how to run the installation wizard?

  What is tdrc.tdrcfacade and how to run the installation wizard?  My desktop creative cloud application does not open properly... it is just a blank window.

  Much obliged,

  Angiecrichards@gmail.com

  ! !

  Are Angie, you a blank white screen? What version of OS are you using?

  Here's what you can try:

  1. Blank white screen. Sign in | Creative cloud Packer
  2. New application Cloud Creative unusable: it is empty!
  3. Creative cloud Packager white screen after the Adobe ID Login
  4. Re: screen creative black cloud

  Waiting for your response.

• ADF: How to print the query and the query passed into the class executeQueryForCollection methof impl VO parameters.

  Hello

  Kindly let me know how to print the query, and the parameters passed to it? I tried with the params parameter in super.executeQueryForCollection (qc, params, noUserParams); but could not succeed.

  I need save the query and the parameters passed to it. Kindly help.

  Thanks in advance,

  Kalpana.

  Here you go

  Coding with Passion: Oracle ADF - Debug Mode object query with parameters

• How to frame the query?

  Uses oracle ebs r12
  
  I have a table of data is
  
  Operation_seq Type statusflag SeqNum
  1 10A Y
  2 20 b Y
  3 30 c Y
  4 40 D Y
  5 50 e N
  6 60 f Y
  
  I want to write a query in which I want to take only 1 record operation_seq = 50 and Statusflag is N and all other interventions seq status is there.
  
  My query must return only 50 operation when the status of 50 is N and any other status is Y.
  
  Help, please.
  
  Thank you
  Lavan

  LAVANKV wrote:
  This statusflag can be (null or N), then how to frame the query.

  Simply wrap the statusflag with NVL column, you should be good.

  SQL> with t
    2  as
    3  (
    4  select 1 seqnum, 10 operation_seq, 'a' type, 'Y' statusflag from dual union all
    5  select 2 seqnum, 20 operation_seq, 'b' type, 'Y' statusflag from dual union all
    6  select 3 seqnum, 30 operation_seq, 'c' type, 'Y' statusflag from dual union all
    7  select 4 seqnum, 40 operation_seq, 'd' type, 'Y' statusflag from dual union all
    8  select 5 seqnum, 50 operation_seq, 'e' type, '' statusflag from dual union all
    9  select 6 seqnum, 60 operation_seq, 'f' type, 'Y' statusflag from dual
   10  )
   11  select seqnum, operation_seq, type, statusflag
   12    from (
   13            select t.*, count(decode(statusflag, 'Y', 1, null)) over() cnt_1, count(*) over() cnt_2
   14              from t
   15         )
   16   where operation_seq = 50
   17     and nvl(statusflag, 'N') = 'N'
   18     and cnt_2-cnt_1 = 1
   19  /
  
      SEQNUM OPERATION_SEQ T S
  ---------- ------------- - -
           5            50 e
  

• How to automate the process of loading data using load file &amp; Task Scheduler

  Hello
  
  I do the automated processes to load the data into Hyperion Planning application using the file data_Load.bat & Scheduler of tasks.
  
  I created Data_Load.bat file, but the rest of the process, I cannot complete.
  
  Could help you me, how to automate the process of loading data using the file Data_load.bat & task Scheduler or what are the rest of the file is require it to achieve.
  
  Thank you

  In response to your question using the maxl for loading scripts?

  If Yes, I've seen and deliver in the batch (ex: load_data.bat) that is you do not have the path of the maxl script complete with a batch when passing through the event the task scheduler will work, but the log file and / or error will not be created. Which means lots claims it linked task scheduler, although he did not do what you need to.

  If you use maxl use this as the batch

  "essmsh C:\data\DataLoad.mxl" or you can also use the full path for the maxl or work elsewhere. The only reason why I think that the maxl can then not work is if you do not have the updated batch updated to call on all LANE changes maxl or if you need to update your environment variables to correct the command essmsh to work in a command prompt.