Server Web UI Builder error

Similar Questions

• Services Web site deployment error "server returned nothing (no header, no data)" and much more

  I develop a VI on a large scale with a VI of web service combined in 2010 SP1. The "auxiliary" VI is responsible for storage of data capture and analysis as well as data and communications. It's big enough and communicates with the web method VI through shared network variables [and I use the DSC module to allow the management of shared variables of events].

  I can build and deploy the web method VI very well and it runs great. However, I need to communicate between the auxiliary and web method VI, and it seems that I can't do without including the auxiliaries vi when generating RESTful web services [also, is there a way to make this web service generates?]. When I added the auxiliary vi for the construction, he built very well, but then I got during deployment:

  "Server returned nothing (no header, no data).

  The next time I tried to deploy, I got a fake NI Auth dialog by this knowledge base article. By following the instructions for case 1 ["failure of Web application server since last started"], I ran Services.msc and found that NEITHER Application Web Service was not running. I tried to restart the service, but got this error:

  "The NI Application Web Server service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the service logs and alerts. »

  Knowledge base article suggests to restart at this point and I did, but I still see the same behavior. So really, I have a few questions:

  1. is it possible to deploy a variable library shared on the network through a local web service deployed and VI?

  2. What are the causes "server returned nothing (no header, no data)" in the deployment? A google search gave very little.

  3. what this means: "NI Application Web Server service on Local computer started and then stopped... '. "and what do I do to get my Web Application Server up?

  [to pile on the pile... I tried to re - activate the localhost:3580 Web application server and got an error. Localhost:3580 then offline also.]

  Thank you!

  Update.

  I noticed that the Web application server attempted to deploy the web service broken and choke her. There seemed to be no way to clear the .lvws created at the origin of the construction. I was able to remove the deployment folder to \UserServices\deployed\ $(WebServicesRoot)- , but it has been recreated from the .lvws whenever I tried to restart the service.

  So I called NOR and they told me this directory [XP]:

  C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone

  The .lvws has been in this folder. I deleted it and now I can run the ApplicationWebService. Apparently this file hidden undocumented is a "not-quite-bug" that is recognized as needing a fix in future releases.

• Ant with WebLogic 10.3 build error

  Hello
  
  I'm trying to compile the web service example in the tutorial
  
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/use_cases.html#wp228687
  
  Use case # 1
  
  And I get this error when you try the command "> ant-build service:
  >
  D:\myExamples\hello_world\src > ant build_service
  BuildFile: D:\myExamples\hello_world\src\build.xml
  
  BUILD FAILED
  D:\myExamples\hello_world\src\build.XML:4: taskdef class weblogic.wsee.tools.anttasks.JwscTask is not found
  by using the [AntClassLoader] class loader
  
  Total time: 0 seconds
  
  
  At this point in the tutorial, the build.xml file contains:
  >
  < name of project = 'webservices-hello_world"default ="all">
  
  < taskdef = "jwsc" name
  ClassName = "WebLogic.WSEE.Tools.anttasks.JwscTask" / > "
  
  < name target = "build-service" >
  
  < jwsc
  srcdir = "src".
  DESTDIR = "production/helloWorldEar" >
  
  "< file="examples/webservices/hello_world/HelloWorldImpK.java TJ.
  Type = "JAXWS" / >
  
  < / jwsc >
  
  < / target >
  < / project >
  
  
  I wonder if I need to set a variable in the environment?
  
  I know that my Ant installation is good since I managed to compile and run a java program with a manifesto in the jar.
  
  Thanks a lot for your help.

  chk this
  Re: build errors using Ant

  1. If you are working from the user_projects directory, add the following to the Properties section of the generation xml "". "" Other wise, set the value the full path of the directory on the server wlserver_10.3 lib directory.

  2. in each taskdef element, add the following child element
  
  
  
  
  
  
  
  
  3. Save and run the ant task in your project directory.

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Build error

  When you try to build an application, I get the following error code:

  Error 15 took place at the signing of CodeSignAPI.lvlib:Get error String.vi

  Possible reasons:

  Error: The time stamp authority URL specified does not point to a valid authority timestamp server or an unknown error has occurred.

  «"" "String of full appeal:»»"»
  CodeSignAPI.lvlib:Get signature String.vi error
  CodeSignAPI.lvlibign with Certificate.vi
  AB_Application.lvclassostBuild.vi
  AB_Engine_Build.VI
  AB_Build_Invoke.VI
  AB_Build_Invoke.VI.ProxyCaller

  Any idea of what a solution may be?

  Hi Rasmus,

  Can you provide a little more information about the system you are using? Operating system and version LV project folder?

  I assume you are using LV2009, including a digital signature with your standalone application. If this is the case, please check your "Timestamp URL" in the properties of the Application--> Windows security.

• Web service deployment error

  Hi all!

  I created a Web Service to a VI. This VI has two values of entries: a string and and Int8 and a single output: an array of values (1 x table 3) DBL. The inputs and outputs are well connected via the connector pane.

  For example, in the project > unchanged to build, I created WS, built with the advanced > use LabVIEW 8.x file layout option checked, in the dialog box settings WebService (RESTful). The problem appears when I try to deploy this WS. The following error is displayed:

  Error LabVIEW:  (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
  

  How can I solve this problem?

  Thank you!

  
  

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.

• After changing the IP Server Web host, the datacontrol to AMX page needs to be recreated?

  Hello

  I had deployed a Web service to a Server Web standlonee in my laptop, when I have at home or in the office, wlan ip address will change, so my app of the adf cannot get response of webservice except to build datacontrol based on Web server again, how I change the IP Address of the Web server host in the mobile application and do not need to create the new datacontrol again?

  Please help me! Thank you very much!

  You can change the IP address in the connections.xml file.

  More about this in the video here https://blogs.oracle.com/shay/entry/updating_adf_web_service_data

  about 05:20 in the video

• Boot Server 2008 64 bit error trying to load a 64-bit application...

  Hi all

  I'm under VMware Server 2.0 Build 128374, Windows 2003 operating system company on a Dell Precision 670 2 Dual Xeon 2.80 loan of 64 bit with 8 GB of RAM

  The VMware care state that you can run a 32-bit host operating system and the 64-bit operating systems. However, when attempting to start Windows Server 2008 64-bit the following error message is displayed "error trying to load a 64-bit application, but this processor is not compatiable with 64-bit mode.

  I missing something here or is a VT capable processor required?

  ~ Eric

  Hello.

  Yes, you will need to have a processor of VT capable (and active).

  Good luck!

• Satellite Pro P200: Cannot install Server 2003 - parity memory error

  I have a Satellite Pro P200 and to the work required to install Windows 2003 server on it, but all I get is an error message:

  -Hardware malfunction

  Call your provider of support material

  NMI: Parity check / memory parity error

  -The system is shut down

  I checked the memory and everything seems OK. Vista runs very well on it, and all memory is recognized. I tried different flavors of Server 2003, although all I need is standard edition. Anyone who has met this problem, or someone has any suspicion as to how I can get it operational.

  So, how tested the RAM? With Memtest? Or Prime95?

  I read in many forums that people work servers (no laptop...) SERVERS) that correctly work 1 year with ECC memory, then windows 2003 server gives the same error message you have.

  I mean if Vista works flawlessly and you checked as you say the RAM while there could be a mismatch which must not be for lack of toshibas.
  Maybe you should try a linux ubuntu server edition, which works great on almost * ALL * systems, even on systems with faulty CPU/memory (Ok, ok, not 100%, but it works, I got this case :))

  So, maybe you can try to exchange the RAM, but if you're still the same error then ask microsoft or try another P200, if they are available.

  Sorry dude, but I Don t have a lot of ideas in your situation :/

  Welcome them

• iCal locked w / "the server responds with an error."

  I created a new reminder that I think was too long, so it doesn't have to deal with, but rather "the server responded with an error," appears in a separate imposed on the calendar window that contains the whole long Encore but freeze the iCal program, so I can't go to preferences and change anything. I have to force quit iCal and try & try again, but each time only a few seconds, the message reappears and everything is frozen. HELP PLEASE.

  OK friends, in another string of comments that I found my solution, simple - press the enter/return key and delete key at the same time, and the reminder was sent to the desert. God thank you... happy happy

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  Hello

  I get the below error message while my windows application inserts data in SQL Server.

  A transport-level error has occurred when receiving results from the server. (provider: TCP provider, error: 0 - the semaphore timeout period has expired.)

  I use LINQ-to-SQL.  SQL Server is installed on Windows server 2003.

  We are using SQL server 2008 r2.

  When we insert large data base records, approximately 1 million we get this question.

  Please suggest.

  Hello

  When you use Windows server, we ask you to send the query in the link depending on whether they are the experts.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Thank you.