How to save two 500 GB Mac to one single Capsule of 1 TB

Similar Questions

• How to save two sous-schema data two in one file?

  Hello

  I have a VI tensions from different measurement channels one after the other. How could save the average data two in one file in two columns? The vi is attached. Thank you!

  Watch the context-sensitive help and help for function file writing worksheet to know each connector for then detailed.  You have several things hanging and some things wrong.

  The entrance to the lower part is a Boolean value to append data.  You want it as a True constant since you want to write constantly new data in the file to each iteration of the loop.

  You can't 1 d and 2D connectors at the same time hung.  It is there to give you options.  If the 1 d link has it who uses data, otherwise it uses the connector 2-D data.

  What you want to do is to take the 3 pieces of data and integrate it to a 1 d table and that wire in the 1-D connector.  Connector 2-D leave blank.

• How to combine two or more projects into one

  I have about 11 months of video editing experience. I started with a Sony HDV Handycam (tape) and now use a different Sony Handycam it has internal memory.

  I've upgraded to faster and more powerful computers (3 times in the last year). I have 3 computers - one with an Intel i7 64 bit running windows 7, a second with Intel core 2 Quad running vista 32-bit and Intel core 2 duo laptop running Windows 7.

  I have two editing Corel Video Studio Pro X 2 and first Adobe Elements 8 applications. Each came with the strengths and weaknesses.

  I am disappointed by Adobe regarding how to merge two or more projects into a master project. Working with large video projects is not what I like to do. Ten to 15 mins projects are my favorite length. However, when it comes to burn a DVD and adding projects to the list (this can be done in Pro X 2), I seem to be stuck with burning a DVD separate for each project of first Elements 8. This isn't the way to go if I do work for a client and they want just a DVD.

  I read on a forum and tried to convert an AVI to each project and then inserting each AVI file in my 'master' or final project timeline and then burn a single DVD. This principle works, but the quality of video playback (especially when the subjects are moving) is not acceptable. The edges are saw teeth and the overall quality of resolution is downgraded from the original AVCHD video from Sony handycam camera.

  Not to be too negative on creative adobe 8 elements, he did a great job of editing and burning to DVD with original AVCHD files direct the camera (pre-AVI conversion). I am very satisfied with this part of the application.

  I wish just that I don't have to save or convert each project separate adobe for AVI files in order to combine a number of projects.

  By the way I set up a project that had three blocks in the video (20 seconds) still subject (in this case roses growing in the garden in broad daylight) one block was directly from the camera format AVCHD, one was an uncompressed AVI file is using the options to 'share' in Adobe and third block is a done compressed AVI file also using 'share' in adobe. It was very clear to me that the AVI files are down on the quality of the original AVCHD file of the camera (only slightly better than the compressed AVI uncompressed AVI).

  AND other trouble, it was AVI files reduced the size of the image (same proportions 16:9) and that was disappointing on a HD screen. AVCHD met clear and clean and filled the screen on my 42 '' HDTV files.

  If anyone has had the same problem and can you please help with the concerns that I have.

  Thank you very much

  Paul Hodge

  The possibility of using the individual sequences, when you edit a project, is a force of PrPro. However, there is a difference in price between the two programs. You have to ' get something for your $, right? Personally, I created my PrPro sequences like "chapters" change like that and then export each sequence import into Encore to create.

  Pre, Steve to edit a project and then export as DV - AVI, technical for import in 'the master' project for the creation of final on DVD, is the best method. Were I not also on PrPro, this is exactly what I would do. It works perfectly. When all is said and done, there are no other measures, as for me, using PrPro and again. PrE was capacity-building, albeit somewhat limited, if a user does not need to transfer AV files to another program (in my case).

  Good luck

  Hunt

• How to combine two annexes to function as one in a single file

  I don't know how to combine two calendars in a single file. I want to eliminate the process of selection of the two annexes and pulling them upward at the same time. They need to exist as a single file. I do this using the export and import function? Copy paste perhaps? Your help will be very appreciated.
  
  Thank you

  You can export a calendar in a SET, then import it back and add, in the second schedule. In order to develop more... you have two appendices A and B. Export to a file SET. Open B, then import the x from A to B. Under Options project to import in the import, import action Wizard, choose Add in the existing project.

  I hope this helps!

• How to combine two different bookmarks lists into a single list?

  I try to combine the two lists of bookmarks. One of the IE and the other of Google Chrome. I created two HTML Firefox files for each and they are listed in my tab of Firefox bookmarks separately, but I want to combine and more written duplicate or manually delete the bookmark if there is a duplicate.

  Open the HTML files and then CTRL + SHIFT + B (or show/organize all bookmarks) then open the folder you want to left click on the mouse for the first bookmark , then shift + down arrow on the keyboard to catch everything then in Organize menu choose transfer (or move) , select the folder you want and click OK.

  Exit Firefox and restart.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• How to combine two properties of string in a single repository

  Hi all
  
  Someone of you knows a way to combine the two properties of repository in one alone, something like this (it's just pseudocode is not working)?
  
  < name="firstName".../ property >
  < name="lastName".../ property >
  < property name = "nameToDisplay" >
  < attribute name = "propertiesToCombine" value = "firstName, lastName" / >
  < / property >
  
  I found this:
  
  < property name = "brothers and sisters" >
  < derivation method 'union' = >
  the brothers < expression > < / expression >
  Sisters < expression > < / expression >
  < / bypass >
  < / property >
  
  to http://docs.oracle.com/cd/E26180_01/Platform.94/RepositoryGuide/html/s0612derivationmethods01.html#s0612union01 but just work with list with strings :(
  
  I want to achieve without extending GSAPropertyDescriptor
  
  I want to do this because the display name of a descriptor to point that I need to have the combination of properties that I have.
  
  Kind regards
  Obed
  
  Published by: obedmhg on February 11, 2013 10:39

  Sounds good, I don't see any problem with this approach!

  Peace
  Shaik

• How can we on parallel HBR spwan in one single batch file?

  We have several Hyperion business rules to be executed at the lot at night. To facilitate the control and management, we put all business rules in one single batch file. But how can spawn us different trade rules so that these rules can be run in parallel?
  
  We are using Windows Server 2003, tasks scheduled with Essbase worm 11.1
  
  Thank you!

  R1 and R2 can at the same time, but must finish before R3 and R4?

  You can START /Wait. a batch which generates then two other sessions to START without a/wait?

  Do this twice and you will get rough parallelism.

  Otherwise, why not just use a scheduler to the BONE? Have first processes write completion logs. The second so that the first must be done, but put in a loop looking for FILEEXIST.

  Lots of ways to address the issue. Scripts of this kind of thing is always fun.

  Kind regards

  Camerin Lackpour

• How to combine two separate personalized stamps into a single category categories

  I have two categories of personalized stamps. I want to spend all the stamps of the second category in the first category. I looked at the command manage custom stamps, but that does not offer the ability to move a stamp from one category to the other.

  Is it possible to move from one category to the other stamps in Acrobat Pro XI?

  You can open each file stamp and set the title (file > properties > Description > title) of each PDF in the category you want. Then save, close Acrobat and restart.

• How to install two copies of Symantec on a single server

  I have Symantec endpoint 12.1 and installed on Server 2008 for 10 users and I have another copy also 12.1 for 10 users, so I put 2 copy on the server? If no WHAT I HAVE TO DO?

  You need to ask Symantec directly for advice and support for their products.

• How to save a file on my mac webscan

  When you use webscan hp7610 how to save the file on my mac?

  Hi roch4t,

  I understand that you have an Officejet 7610 and you're wanting to know how to record a webscan. I will definitely do my best to help you.

  I tested on our Mac 10.9 we have here and came with the screenshot below. Once the scan is finished, I held the CTRL key and clicking on (or if you have a two button mouse, you can just right click) on the analysis and got the drop-down list, you see at the bottom right and selected open in preview. Once it has opened in the preview, I was able to then click on file and save.

  

  Hope this helps, have a nice day!

• I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan photograph b

  I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan of photography by Adobe (including lightroom and photoshop)

  Hi Robertc70810949,

  It is a digression of your technical question, but you haven't purchased two separate subscriptions for creative cloud? You are probably aware of this, but just in case you're not, a single Plan of creative photography cloud allows installation and activation on two computers. These computers can be two Macs, two windows, or one of each. See Adobe Creative Cloud FAQ for more information. Of course, you can have another reason to buy multiple subscriptions, but I wanted to clarify in case you can save yourself a little money.

  Kind regards

  Del

• I have an imac with time capsule - I want to save two pc laptos have the network. How to map a network drive?

  How to map a network drive, so I can save my two portable pc on my imac time capsule?
  Thank you

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308582

  It will be useful.

• How can I use lightroom or photoshop on my laptop, when I open it, it says only, I use on two computers and I have already two I have Mac at home.

  How can I use lightroom or photoshop on my laptop, when I open it, it says only, I use on two computers and I have already two I have Mac at home.

  Hi moving,

  You can use Lightroom or Photoshop on two computers using a single license.

  If you want to use on the third computer, you should disable any previous machines and turn it then back on the 3rd machine.

  You can also consider getting another license or subscription to your other computer.

  ~ UL

• How to save the slide show settings so when I press on Ctrl + enter only what I want?

  How to save the slide show settings so when I press on Ctrl + enter only what I want?

  huh?

  R

  I tested what you gave me there Rob. On my Mac, I have two monitors:

  -Blacken / display slide show on a monitor (the primary monitor, if I move LR in my secondary follow-up, the slide show is still on the first, but the second still works normal with LR just sitting there).

  -If I turn off slide durration I manually advance the slides with the right arrow.

  -I don't have 'Lightroom' (or with my settings current all) text on the screen.

  -Does not repeat itself.

  My Windows machine is not two monitors, but the others work properly...

  In other words, until I thought about it differently. As we seek to change the slideshow settings, I was naturally in the slideshow module. But I then remembered that the interest of the Impromtu Slideshow is that you can view the slide show playback from any module. Once I went back to the library and click Command / Ctrl + Enter, then I saw exactly what you're talking about. Both monitors are blackened, duration of the slide is ignored, etc.

  You know why? As the Impromptu slideshow uses one of the models outside the slideshow Module. Which one? Well, by default +, of course. How do change you that? Right-click (Cmde) slideshow model you prefer to use and select «Use for Impromptu slide show»

• How to save attachments from several emails?

  How to save attachments from several emails at the same time.
  Looking to save all attachments of dozens of messages without needing to make a message by one.
  Is there a way to do this?

  Kind regards

  Robert

  Hello!

  Thunderbird has no way of native to do, but you might consider the AttachmentExtractor for Thunderbird Add-on.

  Once it is installed, you can select all the emails that you want to download the parts attached and right click then click on "extract selected Messages to' > 'Browse (0)' and then choose the directory you want to save the attachments to.

  I hope that solves your problem!

  If so, would you please choose this answer as your solution? It would help other users of Thunderbird to find help on the forums faster and more efficiently. Thank you!

  And of course, feel free to post if you need help!

  Email happy trails (two drums and a cymbal fell off a cliff).