How to set the backup location?
I want to make my backup location for photoshop elementsan external drive.
gbjadobe wrote:
I want to make my backup location for photoshop elementsan external drive.
See the online help:
Organizing items help | Catalogs backup or restore
When you start the process of backup from the Organizer, you can choose a place to store your backup folder. The backup folder saves what is necessary to restore your library of photo files and your catalog. You must create a main file to this effect on the external hard drive, no backup in the root folder.
Tags: Photoshop
Similar Questions
-
How do I get the browser permission to set the current location
I had this problem before, and it's why I keep getting of Richardson, Tx. and sometimes even close to cities. Most of the time my position shows Richardson, Tx. and when I try to detect my location I get the browser refused permission for the current location warning box.
I tried my solutions I have found on the internet, and none of them don't keep my sheet set, even after he declares that it is set. How can I get the permission of the browser set my current position (Jackson, TN)?
A lot of time, the sites asking that your location will try to determine based on your IP address, which may return strange results if your Internet connection performs the routing in other places.
You can make sure that this check box is disabled, as shown in this picture of eightforums:
But you can also set the default location to use, here:
-
How to judge the backup set is available (with RMAN)?
Hi all, after you back up the database, how to judge the backup set is available?
SQL > SELECT * FROM V$ VERSION;
BANNER
----------------------------------------------------------------
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
AMT for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Productionrman target / Recovery Manager: Release 11.2.0.1.0 - Production on Mon Jul 9 12:28:51 2012 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. connected to target database: CATDB (DBID=2328696599) RMAN> crosscheck backupset; allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=24 device type=DISK crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206 14T153439_7XMHL0JL_.BKP RECID=34 STAMP=785950480 crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206 14T153546_7XMHN2C6_.BKP RECID=35 STAMP=785950546 crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X MHN4MH_.BKP RECID=36 STAMP=785950548 crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X MLKN66_.BKP RECID=37 STAMP=785953539 crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X N4D6YF_.BKP RECID=38 STAMP=785971798 crosschecked backup piece: found to be '*AVAILABLE*' backup piece handle=D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y V4001O_.BKP RECID=39 STAMP=787249359 Crosschecked 6 objects RMAN> list backupset; using target database control file instead of recovery catalog List of Backup Sets =================== BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 26 Full 320.44M DISK 00:01:03 14-JUN-12 BP Key: 34 Status: AVAILABLE Compressed: YES Tag: TAG20120614T153439 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_NNNDF_TAG201206 14T153439_7XMHL0JL_.BKP List of Datafiles in backup set 26 File LV Type Ckp SCN Ckp Time Name ---- -- ---- ---------- --------- ---- 1 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSTEM01.DBF 2 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\SYSAUX01.DBF 3 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDOTBS01.DBF 4 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\USERS01.DBF 5 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\CATMETADATA01.DBF 6 Full 3712551 14-JUN-12 D:\ORACLE\ORADATA\CATDB\UNDO2.DBF BS Key Size Device Type Elapsed Time Completion Time ------- ---------- ----------- ------------ --------------- 27 99.50K DISK 00:00:00 14-JUN-12 BP Key: 35 Status: AVAILABLE Compressed: YES Tag: TAG20120614T153546 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\BACKUPSET\2012_06_14\O1_MF_ANNNN_TAG201206 14T153546_7XMHN2C6_.BKP List of Archived Logs in backup set 27 Thrd Seq Low SCN Low Time Next SCN Next Time ---- ------- ---------- --------- ---------- --------- 1 47 3712495 14-JUN-12 3712583 14-JUN-12 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 28 Full 9.45M DISK 00:00:02 14-JUN-12 BP Key: 36 Status: AVAILABLE Compressed: NO Tag: TAG20120614T153547 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785950547_7X MHN4MH_.BKP SPFILE Included: Modification time: 14-JUN-12 SPFILE db_unique_name: CATDB Control File Included: Ckp SCN: 3712594 Ckp time: 14-JUN-12 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 29 Full 9.45M DISK 00:00:07 14-JUN-12 BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20120614T162535 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785953535_7X MLKN66_.BKP SPFILE Included: Modification time: 14-JUN-12 SPFILE db_unique_name: CATDB Control File Included: Ckp SCN: 3715284 Ckp time: 14-JUN-12 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 30 Full 9.45M DISK 00:00:02 14-JUN-12 BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20120614T212957 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_14\O1_MF_S_785971797_7X N4D6YF_.BKP SPFILE Included: Modification time: 14-JUN-12 SPFILE db_unique_name: CATDB Control File Included: Ckp SCN: 3735186 Ckp time: 14-JUN-12 BS Key Type LV Size Device Type Elapsed Time Completion Time ------- ---- -- ---------- ----------- ------------ --------------- 31 Full 9.45M DISK 00:00:23 29-JUN-12 BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20120629T162221 Piece Name: D:\ORACLE\FAST_RECOVERY_AREA\CATDB\AUTOBACKUP\2012_06_29\O1_MF_S_787249342_7Y V4001O_.BKP SPFILE Included: Modification time: 29-JUN-12 SPFILE db_unique_name: CATDB Control File Included: Ckp SCN: 5138750 Ckp time: 29-JUN-12
Please do not forget to change the status thread answer whether it is possible when believe you your thread replied, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding
Published by: Julien Hesenov on July 9, 2012 12:42
-
How to set the different HTML (site) page in the workspace during the backup?
Hello
How to set the different HTML (site) page in the workspace during the backup?
For example:
A user connects to the workspace.
If you have already started the procedure for backup database administrators, the user sees the HTML page that reads "don't touch anything, need a backup procedure.
Thank you to
MarekHi Marek,
I have not tried, but it seems the most logical way:
Rename the BpmLauncher.jsp to BpmLauncher.jsp.orig
Then, create a new file called BpmLauncher.jsp and put the following inside:
Do not touch anything, it takes a backup procedure
Kind regards
Robb Salzmann -
How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?
I found a solution! -Set the size and position of the façade with the help of the
File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).
then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.
OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.
-
former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.
My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only. I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?
Hello1. the options apply automatically on?
2. have you made changes on the computer recently?
3. have you installed any Alltel Wireless application to manage network connections?4. What is the current network location type on? Is it home, work or public?Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing. So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
Method 1.
I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.Method 2.
Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
Or you can disable the antivirus software and check if that causes this behavior.
Temporarily disable the security software installed on the computer and check if the problem persists.
Disable the anti-virus software
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
How to set the storage space allocated to the restoration of the system to 200 MB?
Could you tell me how to set the maximum storage limit to 200 MB?
Whenever I have delete system restore points, my hard disk free space increases about 10%. About a week or so later, it's back to where it was before I deleted the restore points.
It is very important for me because I am sure that storage space is set too high.
Hello
See the "BOLD" marked links with more information to help.
Phantom memory also holds your restore VSSadmin points it defines parameters.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.htmlHow to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
How to turn System Restore on or off in Vista
http://www.Vistax64.com/tutorials/66971-system-restore.htmlAdjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
try to set the color of amd's message color depth less than 24. How to set the highest color depth?
If your computer allows you to change this setting, it will be located in the "Control Panel > display > resolution > Advanced Settings > Monitor tab > screen colors.
-
How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?
Here is the error
Failure of deployment: Info: request shipment: install and launch
Info: Action: install and launch
News: Native debugging: on
Info: File size: 219949
Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
Info: Treatment 219949 bytes
actual_dname:
actual_id:
actual_version:
result::failure 881 the application author does not match the author token of debuggingThe author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.
If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.
-
How to check the backup?
Hi, we take each backup to hot day and export the backup via scripts?...
export backup we can check by using the log file, he succeeded...
But how to check the backup to hot or cold backup is successfully completed?
Help, please...
Published by: user10745179 on February 24, 2010 03:39Hello
CHCK the size of the backup in the backup location...
Kind regards
Deepak -
The backup location has changed in iTunes 12.5?
I've already mapped ~/Library/Application Support/MobileSync/Backup on a network share on my NAS from my MacBook has enough free space to store all the backups of my mobile device. This worked fine until I upgraded to iTunes 12.5.1 yesterday, now the backups seem to run OK until they arrive just before finishing, claiming there is not enough free space on the target device. It's weird, because there is about 5 TB of free on my NAS. At this point, there is a new folder inside backup with today's date, and the devices of iTunes preferences page displays a new entry for the unknown, dated 01/01/2001 00:00.
So, what has changed with the latest version of iTunes? The audit of the application of the host operating system is free space instead of the backup location? Seems a bit silly...
Have exactly the same problem. Once I removed the symlink to my folder of nas backup completed without error. I copied my share of nas backup and recreated the symlink and then itunes was able to read correctly. Still not able to complete the backup in the folder of sin, however.
-
How to set the number of e-mail messages that are stored on my iPhone
How to set the number of e-mail messages that are stored on my iPhone – so when I don't have a network connection I can see a 'large' number of messages in my Inbox etc.
This is series is not defined in the world
You must go to settings-> mail, contacts, and calendars and check the settings of your e-mail provider offers in this area
-
How to set the time that my screen stays on?
How to set the time that my screen lights up. I have an iPod Touch 6?
Settings > general > auto-lock
-
How to set the default android home page.
How to set the home page in the latest browser of firefox for android?
Hello:
Unfortunately you can not remove the top sites home page but you can pin a site, remove a site from unpin it and change the url of a pinned site.
Please read this article for instructions.
I hope this helps!
-
How to set the time between slides in a slideshow (iPhoto, el capitan)
How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.
See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice
Maybe you are looking for
-
is it possible to reverse synchronization of bookmarks?
I moved bookmarks from another computer through sync and other bookmarks already on file have been deleted
-
Cannot get Windows 7 drivers for Satellite C50-A-1JQ
I tried to install windows 7 on my C50-A-1JQ as several software packages that I use at work do not work with windows 8. After successfully installing windows 7 I have a list of connected UN-installed in my device manager. Include the Ethernet contro
-
Port of public to private ip address mapping
I'm trying to change a netopia router in Bridge mode and put a UTM5 behind the bridge newly netopia. I see in the netopia there are several IP cards that take some of the assigned public addresses and direct them to addresses internal ip. I need to k
-
USB 3.0 on desktop release
When HP released USB 3.0 on desktop computers?
-
Stream x 360 11-p010na: touchscreen driver
Hello I had a fresh new windows 8.1 64 installed on my notbook. After looking in the page drivers to support, I can't find the driver of screentouch. so my question is: -where can I find this driver to activate the touch screen? thaks and good day