USB 3.0 on desktop release

Similar Questions

• This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  I had the hard drive of my worn desk w / Vista HP layout box HD Startech. This will work if I plug it into the USB Port of a desktop with Windows 7 HP?

  Hello
  Yes it will work. You can access files on the hard drive but not the Oprating system hard disk previous. The previous hard drive can be used as hard drive.

  I hope this helps.

• iTunes is not able to find the USB controller on PC desktop computer and laptop

  Hello

  Since the two versions of iTunes for Windows (10) diagnostic program tells me a green dot in front of "USB-connections", but didn't tell behind the "no-USB controllers found. That's why my iTunes is not able to connect to the iPhone 5. I have the same problem on my desktop and on my laptop. Windows detects all my USB Ports, well. If someone can solve it? Thank you.

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support Apple version of the above opinion.

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates. 64-bit users might also try the build replacing iTunes for Windows (64-bit-for older video cards) which is sometimes a useful workaround.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.4.0.119 to 12.3.3.17 or 12.3.2.35, for example, then you will also need restore the database of the library in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• Need help with USB 3.0 on desktop Pavilion 500-214

  I am currently the owner of desktop HP Pavilion 500-214.

  I noticed that the USB 3.0 ports do not seem to work.  Tried with 2 different brands of USB cables now.

  I connect my Samsung S5 with USB 3.0 desktop.  It connects to the 3.0 for a few seconds and then gives the message "cannot connect USB 3.0 devices.

  Does anyone else have this problem?  If so, how to fix?  Or the troubleshooting steps that you might suggest?

  Help, please.  Thank you.

  "So there is no way to use USB 3.0" so it seems.  It is a problem of Samsung and Windows 10 and not HP

  When Samsung found a solution, then it will be OK.

• -USB - HP ENVY PC Desktop 700-074 wireless receiver

  Buy HP ENVY 700-074 Desktop PC. I carefully unpacked and configuration system.

  Mouse and wireless keyboard does not work.  I checked and rechecked for a wireless receiver in the package. No not found.

  Is it possible that I'm missing a USB receiver or is it a built-in feature?

  Called the best buy. Apparently no USB receiver not packed with the mouse and keyboard.

  Thanks HP!

• USB problems: When HP Photosmart C4599 is enabled, all other USB ports on the desktop becomes useless

  I just bought a HP Photosmart C4599 and successfully installed the software provided on my HP Pavilion 743c Desktop.  I connected via a USB cable.  I am running Windows XP SP3 and automatic updates are on.  I've updated the software that came with the printer and everything seems to work properly.  I printed and scanned successfully.   However, I noticed that when I connect my memory stick or digital camera via USB, I now get this message annoying that States, peripheral USB not recognized.  The only way to get my computer to recognize my stick of memory or the camera, is to stop my printer and then reconnect my stick of memory or the camera.

  Somehow the printer or the software's a waste opportunity to my computer to recogize the devices that are connected via the USB port.

  I wish I could connect my memory stick or the camera without turning off my first impression.

  Any solution would be really appreciated.

  This usually occurs on computers with older chipsets USB which cannot provide enough power to multiple devices at the same time. The best you can do is try and install the latest drivers for your motherboard or update the BIOS of your motherboard. Otherwise, use only 1 USB device at the same time. Or, buy a powered USB hub and connect the printer or get a new computer.

  In addition, you do something else. Unplug all USB devices from your PC (except the keyboard and mouse). Now just turn off your computer and unplug the power cable from the Tower of the wall outlet. Be it like that for about 20-30 minutes. Now just press the power button on the tower for about 3 to 4 times to ensure that all static electricity is passed, then plug the cable into the wall and turn on the PC and try the two devices to connect to the PC and see if you get the error messages.

  In addition, you can insert the memory stick into the memory card slots printers and view pictures on your computer.

• USB 3.0 card desktop Pavilion Elite HPE - 390t CTO?

  Is there a HP (or other) 3.0 card USB compatible with the Pavilion Elite HPE - 390 t CTO desktop PC?

  Thank you.

  Hello

  Your product, it seems that you should have enough space to expand.

  I suggest you find a USB 3.0 PCIe card to any provider of computer frame.  Here are the instructions on installing a PCIe card (you can start with step 2).

• USB connection to the desktop

  Hello world

  I tried to get a similar but empty post came.  Here's the scenario.  There is an application on the device and an application on the desktop.  They communicate via USB which works very well for most.  I use:

  (StreamConnection) Connector.Open ("comm:USB; channel = "+ name);

  to save the channel of the device to connect to the desktop computer.  Once the two are connected, I can read and write to streams.  The problem is in the time between the opening of the connection and the connection actually put in place.  The application of device cannot be upward to be listening to connections so it could be some time before the connection is established.  I can't be able to be informed of the connection be established.

  Is there a listener that I can use or call Connector.open in a way that would inform the code that the connection has been established?

  Thank you in advance,

  Jakub

  I'm not sure what you're asking here... but have you looked at the interface of USBPortListener?  It may provide what you are looking for.

• USB WIFI for old desktop PC

  I have an A61E, which is still in use. To add the WIFI feature, I was watching a USB 2.0 WIRELESS 802.11 adapter specifically ac. Would this work?

  Took the plunge. I bought a Netgear USB 2 WIRELESS card and it works like a charm.

  Just plugged, auto drivers loaded and the paques1861 device found my wifi modem.

  NB: do not use the dial-up connections, using engineering instead.

• An error occurred the USB connection to your desktop

  Hello, I have a Windows 7 32 Bit Office as part of a floating pool. When I try to connect a USB device by using the view Client I get the error in the subject line.

  of course, any device 'super' speed USB3 will be blocked. If you plug it into a usb2 port, it must retreat to the usb2 mode and should work...

• I would like to add the functionality of usb 3 to a desktop HP Pavilion P7-1254 running Windows7.

  I would like to use an external USB3 drive to back up my system. How do I know what USB3 card can be added to my motherboard?

  Bill, welcome to the forum.

  Here is a card that should do what you need:

  http://www.Newegg.com/product/product.aspx?item=N82E16815150222

  It's a PCI Express x 1 card.  The motherboard has 3 of these slots.  If you do not want this card, it will work as an example of what you need.

  If your problem is solved, please click "accept as a Solution.

• Trying to share a HP printer (connected by USB cable to the desktop running XP) for the new laptop running Windows 7

  Hello

  I was able to share the printer between two computers, such as mentioned in the title, but I can not print from my laptop if my office (to which the printer is connected) is disabled.

  Is this in any way about this? I have a netgear router and Windows 7 contains the printer even when the office is off, but says that it is offline.

  Your help is appreciated in advance.

  Hello

  Around her, the only way is to get a network printer.

  Network printer is connected (or connect via Wireless) in the router and thus accessible by any computer on the network.

  Example, http://www.newegg.com/Product/Product.aspx?Item=N82E16828115634&cm_re=wireless_printer-_-28-115-634-_-Product

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How can I find my usb on the desktop version

  I have three different sets of USB ports on my desktop HP Pavilion HPE (model h8 - 1070t). I would like to know how do I know what version they are. I can't find this information on the HP site and have no idea where the original documents are as I have recently moved. Any help is greatly appreciated.

  Hello:

  The info is very brief, even on the support page.

  http://support.HP.com/us-en/document/c02854392

  The configurable options in front 2 ports should be usb 3.0.

  4 to the rear can be only usb 2.0

  The average Visual check is that the plastic inside the port bar is blue on usb 3.0 ports and black on usb 2.0 ports.

  http://support.HP.com/us-en/document/c02837359

  Productivity front ports

  Must select one of the following options: 15-in-1 card reader + Top I/O (2 headphone jack USB 3.0 + 1 + 1 taken micro) + Front I/O (2 USB 2.0)

• How can I import bookmarks firefox desktop for iPhone safari?

  I know that you cannot synchronize, but how do you import to iPhone safari?
  is there, for example, a way to bring firefox bookmarks HTML file in iPhone.

  and import them into safari that way?
  

  a few ideas I've included: using the dropbox app, by plugging the iPhone through the USB cable into the desktop and dragging...
  do you know anyway that would work?
  Thank you very much!!

  Hello

  You can take a look at this Add on who can do what you are trying to reach.

  Note that there is a version of Firefox was released for iOS that may allow you to use Firefox Sync to link your bookmarks to desktop and mobile.

  I hope this helps, but if not, please come back here and we can look at another solution for you.