Pavilion dv6836eo: install Windows 7 on a Pavilion

Similar Questions

• Pavilion 15-p108ne: my computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  My computer laptop p108ne I hope that I can install Windows 7 Windows 7 drivers. But what was not in the site

  Hello:

  You should be able to use the W7 x 64 drivers and software of p000-15 t on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-P000-notebook-PC-series/6936226/model/7174371

• Installed Windows 7 on HP Pavilion 23 AIO - Wireless does not

  Hi, I installed windows 7 to replace the 8 windows pre installed on my hp pavilion 23 aio PC and network drivers came out. I managed to get lan to work by getting drivers Realtek RTL811F downloaded and installed from usb, but the wireless won't come back

  Anyone know how I can make it work?

  In the Panel, there are several troubled devices - network controller, peripheral pci, pci simple communication controller, sm bus controller and bus unciversal controller

  Hello:

  The drivers of motherboard of this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5265168

  The specific drivers you need are:

  SMBus:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106361-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  USB:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106744-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-116781-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106746-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  Try this driver for the wireless card. (The page on record your model does not show that it comes with the wireless network card).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-106131-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5265168 & sw_lang=.

  If this driver does not work, click on the network controller and view the ID of the hardware for it.

  Who can tell me what model wireless card it is, and I can post the link for the driver you need.

  If you don't know where to find the hardware ID, please read the guide at the link below.

  http://www.WikiHow.com/find-hardware-ID

• Desktop HP Pavilion p6310y: need standalone Serial ATA Drivers to install Windows Vista on Pavilion p6310y

  I bought your desktop Pavilion p6310y on eBay, and I really like it. I installed Windows 7 Ultimate on it without problem. For the purposes of running the software (in particular, Microsoft Virtual PC 2007), I also want to install Windows Vista Ultimate on it, on another partition.

  I was under the impression that Windows Vista Home Premium 64 - Bit was originally installed the operating system when this system was released, however, when I start the installation support Windows Vista (which I created from a downloaded ISO), it requires additional drivers (no doubt, Serial ATA drivers) before instalatio, also no hard drives appear in the drive list. Anyone know where I can get these independent Serial ATA driver files? The controller is a NVIDIA nForce Serial ATA controller. I do not have the recovery of original installation disks and don't think that it would be possible to get to this point, this system is no longer supported by HP.

  Any help would be appreciated. TIA.

  Mark W. Stroberg

  Hi, Mark:

  I compressed upwards and tied the driver for the sata raid controller, you require to the nvidia chipset, that your PC has below.

  The best way to install the driver is as follows...

  Extract (copy) the files on a USB FlashDrive without any folder.

  With the flash player and the support of Vista installation in the machine, boot from the Vista installation media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that Vista will install.

• HP keyboard mapping inorrect freshly installed Windows 7 / XP on HP Pavilion 500-202eo

  Hello

  After you have installed Windows 7 Ultimate on HP Pavilion 500 - 202eo, I noticed that the HP keyboard connected is incorrectly mapped. I had exact same questions with the mapping of the keyboard with new operating system installs on oher systems as well, but couldn't really find a solution for this. In fact, certain symbols appear to move; While normally, where usually I had to press Alt Gr + 2 I got the sign @, I must now press shift. The? + button now product - character, while pressing on - product button /, <>product button------etc. I tried to put the keyboard in 'Norwegian', which is the layout of my keyboard, but nothing helped. It seems that I must be missing some type of a pilot or a patch, which is present on each preinstalled system that I own, but somehow is missing on installed fresh, even if there are no conflicts in Device Manager. I have the same problem on the XP installation. Any suggestions?

  Hello again once, I managed to solve this problem by specifying the correct keyboard language in Control Panel. I didn't need drivers after all.

• No wifi after installing windows 7 on hp pavilion g6

  Hello

  Could you guys help me please with my hp pavilion g6 with the product ID number A4G31AV and pci\ven_1814 & dev_539a & subsys_1839103c & rev_00.  I installed windows 7 on my laptop, but I have all the drivers so my wifi is not workink I can not automatically install the. Please help me as soon as POSSIBLE.

  Thank you very much

  Reka.

  Hi Reka,

  If necessary, download and save the following Installer on another PC, then transfer them to your laptop and run them.

  First of all, download and install the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  When this has completed, restart the laptop.

  Then, download and install the WLAN driver from the link below.

  WLAN Driver - Windows 7.

  All drivers for your laptop can be found on the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311 #n300

  Kind regards

  DP - K

• Does anyone has installed Windows 7 on a laptop Pavilion DV2175

  If anyone has installed Windows 7 on a laptop Pavilion DV2175 and if so it is 32 or 64 bit

  Hello:

  There is an unofficial update guide to windows 7 for the series dv2000.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-upgrade-guide-for-DV2000-models/m-p/186936#M28141

  Given that the maximum amount of memory, that you can install on your laptop is only 2 GB, I'd go with W7 32 bit, as a 64 bit OS requires more memory and disk space to run a 32 bit OS only.

  Not double, but more.

• G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

  Hello
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07Hello,
  
  I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.
  
  I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen
  
  By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.
  
  Product: Model LAPTOP computer: laptop HP pavilion g6
  Product number: QG470PA #ACJ
  
  OS: Windows 7
  
  Thank U
  Look: -.
  EDWARD07

  EDWARD07

  Hello;
  
  Let me welcome you on the HP forums!
  
  According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

  To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.
  
  But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  Good luck

• Pavilion dv4: cannot install windows 8.1

  I installed windows 8.1, after installation on drive c. The PC reboots and start loading. But he remained at 8.1 windows logo. He drives half an hour. After saying the message "your PC ran into a problem needs to restart. What should I do? My PC information: pavilion dv4
  3 GB ram 32-bit.

  Hi @ismailbadhusha,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and problems with installing Windows 8.1. First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - has begun. Restart the computer after this stage and try to reinstall.

  Your system came with 64-bit Windows. You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

  If you have an error message could you let me know what it is.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Pavilion dm4: cannot install windows on my laptop

  I had trouble installing a hard drive in my laptop.  The laptop is a Pavilion Dm4.  Below are the steps I've tried initially.

  1. insertion of my hard drive with Windows 7 installed and works very well in the Pavilion dm4.

  RESULT: computer crashed just after that the windows image came.

  2 reformat the hard disk by performing a clean install of Windows 7.

  RESULT: Once installation is complete my Windows installation fails and I get a message saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  3 reinstall using the system recovery disk that I just bought HP using the code series of laptops.

  RESULT: After inserting the recovery disks and the driver installation disk, I get a message

  P2PP Burn Boot Check failed

  Possible causes

  1.yellow - bang occurred in Device Manager

  2. some silent-installation failure of applications

  3 Found failed to PININST_BBV

  4 Found failed to PININST_BBV2

  5 found memory dump file

  Suggestions:

  1. check REGDEV_BB. Drivers LOG

  2. check the BBApps. Application log

  3. check the memory dump file

  Hi @orangeg66,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dm4 Notebook and P2PP Burnboot could not install. I have seen that date back to 2012 first of all, and then by a default BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop. Restore factory default BIOS works on it.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.
  
  Please let me know how it goes.
  
  Thank you.

• HP pavilion g6-1159sa: after installing windows 7 home prem 64 bit disk a hard nine, I can't get internet connection

  Hi Please help me im not witty but here's PCs. I have a hp pavilion 1159sa g6, product no.-ls294ea #abu

  I had to install a new hard drive for my laptop I did without any problem - the hard drive was the easy bit. then I had to install microsoft windows 7 Home premium 64 bit (clean install) I've done after browsing the web on how to exactly to install windows 7 using a guide step by step useful, I found, all that has happened to the plan. but after the installation, I could not without an internet connection, the ethernet cable wireless or directly using the router.

  im guessing that I have missing drivers? & it is were im stuck! as I said im a complete Newbie, so I would really appreciate your help to try to connect again. I use a different computer, so I can download the drivers, I need usb key, but I don't know what drivers :-(

  I look forward to hear from you, but please explain in simple terms on how should I proceed, thank you very much for reading, I hope you can help I am desperate.  Thanks again.

  You are the very welcome.

  Here are links to the drivers you need...

  network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp56942.exe

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55031.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55030.exe

  Simple PCI communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp52795.exe

  In addition, don't forget to install the graphics driver.  A missing graphic driver normally does not appear in the category other devices.  If a PC does not have graphics drivers installed, under the category of device display cards, there will be a device named Standard VGA adapter if the graphics driver must be installed.

  Your model, you should see an Intel HD graphics adapter.

  If you see a Standard VGA card, then you must install this graphics driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55027.exe

• No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

  No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

  Thank you. This site help me solve my problem.

  http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

• Laptop Pavilion dv6-3118sa wireless button &amp; button mute don't work once installed windows 8.1

  I just installed windows on my Compaq Notebook Pavilion dv6-3118sa 8.1 and my wireless button and button mute does not work anymore can I do to make it work again?

  Hello

  Try the IDT driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59654.exe

  Kind regards

  DP - K

• HP PAVILION 15-00B002TU: cannot install Windows 7.0 64 bit on Hp Pavilion i3 model 15-00B002tu

  Hello

  It has to do with my Hp Pavilion model I3 i5-00B002tu, which came with pre-installed 8.0 Win, the problem is that Iam trying to 7.0 64 bit Windows support USB, but at the end of the installtion it gives me the error 'installing Windows could not configure windows to run on this computer hardware', I tried to load drivers of "'https://downloadcenter.intel.com/download/22194 ' but the problem persists" I need to install win 64 bit 7.0

  Please help me to install

  Thank you

  Hello:

  The Intel link you posted does not work, so I don't know what you've tried.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• Cannot install Windows 8. Freezes at "prepare 2%." HP Pavilion dv6-6104ea PC

  I have a HP Pavilion dv6-6104ea Entertainment Notebook PC. At the moment, I have Windows 7 Home Premium (64 bit) installed. I am trying to install Windows 8 Pro. It gets as far to 'Preparing 2% ' in the installation, and then it just hangs. The stop circle floating around and I have to turn off my cell phone and then restore the previous version of windows. I tried many suggestions, but none succeeded until now.

  Thank you

  MylesMor

  Hey MylesMor,

  Just to tell you that laptop is not yet supported for windows 8. So I have no doubt that this could be a reason, you experience this problem.
  
  Here's my recommendation:
  (1) create a Bootable installation media (whether on a USB flash drive or a blank DVD). - http://goo.gl/CWE2J
  
  (2) save all data - http://goo.gl/nnCc9
  
  (3) update the BIOS to the latest version
  
  4) boot from the created media and perform a "clean" installation choose "Custom Installation" and delete all partitions and then install Windows 8 on "unpartitioned space". This will get around all that prevents the upgrade completion. -http://goo.gl/Kztml
  
  And to * WARNING * you to ensure and download all the drivers of Windows 8 and software for this unit from the driver download page after the complete upgrade that does nothing right now.
  
  Now, if you have Windows 7 is still intact you might stick with it until the phone is supported. Whatever it is, it is possible to find the majority of pilots elsewhere. It will take just more work to chase them. You may lose some minor features, however.

  THX