How to set the version of the application

Similar Questions

• How to set the Application Manager to install applications in a place?

  I'm subscribed to Adobe Creative Cloud. I downloaded Adobe Application Manager. I have a laptop with a 80 GB SSD (c) and (d) 1 TB data reader. I would like to install all the applications on my D drive, because I don't have the space on my C drive, and I want to keep this OS only.

  I found the instructions from Adobe on how to change the Adobe Application Manager installation path. I changed the settings to install in the directory path "D:\program files (x 86) \adobe\" of course that doesn't work sometimes.

  

  Some applications have been installed in the directory I specified. Somewhere, installed in the correct directory, but on the C drive. Then I used the update to Adobe in the tray system, a few days ago and now Adobe is to install applications in the wrong directory on the wrong drive.  "Program Files (x 86)(x86)?

  

  Then, it is almost impossible to find someone from Adobe to meet. Incredibly frustrating. I really don't understand how a basic installation function can then be screwed to the top.

  Does anyone have recommendations?

  When you connect creative cloud, upward in the upper right corner there is a gear wheel > preferences, you have 2 menu items, general and Creative cloud, select creative, select Install Location.

  Good luck!

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• How to set the value of something in a component of the main application?

  Hello
  
  Maybe I've worked on it too long, but I can't understand how to set the value of the text property of a text entry field in my main application component in a block of mx:Script. I have a component called Login in the components folder, and I need to set the text value of empNum. In my statement of mxml up there, I said these components such as xmlns = "components.*" so, logically, the property, I'm putting a c.Login.empNum.text. I can't understand the correct syntax to make this work, and I've tried everything I can think of. Does anyone have any suggestions? I think this should be easy, and there is just something missing me.
  
  Thank you!
  Holli

  Have you tried to give him an id?

  If later you can make the loginScreen. empNum.text = "my text".

  Laurent,

• How to set the Date and time on a remote target in Measurement &amp; Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• How to set the zoom settings menu for lecroywaverunner 6050A

  Hello

  I am trying to initialize the zoom settings of a track of the labview on a Lecroy WaveRunner 6050 A fft. I found how to set the parameters of the fft with the manual of the remote control for LeCroy scopes  http://cdn.lecroy.com/files/manuals/wm-rcm-e_rev_d.pdf ) but I have not found how to set the menu zoom settings.

  I also tried with find command using the command of automation of Lecroy. ( http://cdn.lecroy.com/files/manuals/automation_command_ref_manual_wr.pdf ). but I think that there is a problem with the settings of the commands I send to the scope.

  I just need to put the horizontal and vertical centers and scales.

  If anyone can help,

  Thank you.

  Hello

  I use F1 as my FFT here track.

  Commands to change the scales are:

  Vertical Center: VBS ' app. Math.F1.Zoom.VerCenter = XXXX"

  Portrait/div scale: VBS ' app. Math.F1.Zoom.VerScale = XXXX"

  Horizontal at the Center: VBS ' app. Math.F1.Zoom.HorCenter = XXXX"

  Horzontal scale/div: VBS ' app. Math.F1.Zoom.HorScale = XXXX"

  I also want to point you to an application on the scope that will help you.

  If you go to the file menu and select cut, to the office, there is a shortcut to an application called "XStream Browser"

  The browser is an interactive application that will present all automation methods and properties that are available on the scope.  He acually connects to the scope of the request, so you can use it to test various components to see what they do on the scope.  It is very intuitive and I use it exclusively. (this is where I went looking for the commands above for you).

  Here is a link to Chapter 1 of the manual of automation: http://cdn.lecroy.com/files/manuals/04_xstreamautomation_ch1.pdf

  Page 1 - 5 has a quick introduction to the browser and its use.

  I hope that it becomes operational.

  Kind regards

  Leonard Brown

  LeCroy sales engineer

  1-800-5LeCroy

• How to set the first character as selections in the EditField.

  Hi friends,

  I am a third-party application that I have to set the first character as capital.

  so please help me how to set the first tank as capital.

  Take a look at AutoTextEditField - maybe you can use this to do it automatically...

• How to set the character encoding in Blackberry

  Hello

  In my application, I get the data using http server methods...

  now my question is that, in that the data is seen some like that

  ex: Córdoba, but inside, I do not like this...

  After some R and D, I thought that I have to set the character encoding...

  can someone tell me how to set the character encoding and how I can get all languges in my application

  See below the code for reference

   HttpConnection c = null;
                      InputStream is = null;
                      DataOutputStream os = null;
                      int rc;
      c = (HttpConnection)Connector.open("http://10.10.10.00012:8585CountryDatar;deviceside=true;");
                              c.setRequestMethod(HttpConnection.POST);
                              c.setRequestProperty("If-Modified-Since", "29 Oct 1999 19:43:31 GMT");
                              c.setRequestProperty("User-Agent", "Profile/MIDP-2.0 Configuration/CLDC-1.0");
                              c.setRequestProperty("Content-Language", "en-US");
                             /* Getting the output stream may flush the headers */
  
                              os = (DataOutputStream)c.openDataOutputStream();
                              byte[] res = net.rim.device.api.system.GPRSInfo.getIMEI();
                              os.writeUTF(net.rim.device.api.system.GPRSInfo.imeiToString(res));
  
                              os.flush();
                              /* Optional, getResponseCode will flush
                                  Getting the response code will open the connection,
                                  send the request, and read the HTTP response headers.
                                  The headers are stored until requested.
                              */
                              rc = c.getResponseCode();
  
                              if (rc != HttpConnection.HTTP_OK) {
                                 throw new IOException("HTTP response code: " + rc);
                              }
  
                              is =(DataInputStream)c.openDataInputStream();
                               byte[] data1 = new byte[256];
                               int len = 0;
                               int size = 0;
  
                              int ch;
                              StringBuffer sb = new StringBuffer();
                             while ( -1 != (len = is.read(data1)) )
                             {
                                  sb.append(new String(data1, 0, len));
                              }                
  
                           data = sb.toString();       //Here data is a string storing all data came from server
  

  Give us a break please.  I have other things to do!

  You set the encoding here:

  SB. Append (new String (data1, 0, len));

  Most of the servers give you UTF - 8, but you know that.  Anyway, if it is UTF - 8 follow these steps:

  SB. Append (new String (data1, 0, len, "UTF - 8"));

• How can set the background color of the status bar?

  Quote from the old forum:

  Comments: comments	How can set the background color of the status bar? Posted the: July 17, 2008 02:56
  	How can set the background color of the status bar? Using this code for the status bar: LabelField statusField = new LabelField ("Good Morning", LabelField.USE_ALL_WIDTH |) LabelField.NON_FOCUSABLE | LabelField.HCENTER) { int _backgroundColour = Color.LIGHTGREEN; public void paint (Graphics g) { g.setBackgroundColor (Color.RED); g.Clear (); Super.Paint (g); } }; Font defaultfont = Font.getDefault (); Police smallfont = defaultfont.derive (Font.PLAIN, 12); statusField.setFont (smallfont); setStatus (statusField);

  When I ran the code you have above, my status background color was red.  Is not what you see?  If so, please provide the BlackBerry model and software version that you are testing.  You can find this under Options.

  Or if you try to do something else, please provide details.

  I tested this in the BlackBerry Simulator included with version 4.5.0 BlackBerry JDE (4.5.0.44).

  To do this in version 4.1, first call getColor and save the current color.  Then call setColor, setting the color to the color you want to use for the background.  After this call call fillRect, starting with 0, 0 and go to the size of the field (use this.getWidth () and this.getHeight () to get this).  This must fill in the field with your specified color.

  To allow the drawing of the default content of the field call setColor once again, passing in the original color, then call super.paint.

• How to set the attribute in the request of adf defalut search form

  I use the default search engine in Jdeveloper 11.1.2.3 with Table query.

  I followed this blog to replace the query by default: https://blogs.oracle.com/jdevotnharvest/entry/how-to_tell_the_viewcriteria_a_user_chose_in_an_afquery_component

  Question is how to set the value of an attribute in the request. The user will add what ever he wants those who are caught queryEvent I want to add to the value of an attribute that is not displayed to the user and the search engine and it is necessary for the application to run correctly.

  Hello

  If you went on the blog that I posted, you could get the ViewCriteriaRow of the queryEvent and then you can add the attribute that you want to the ViewCriteriaRow, and then run the query accordingly.

  
  

  Arun-
  

• "How to set the measuring tool onto the foot of measure in inches, for example 10'4"

  "How to set the measuring tool onto the foot of measure in inches, for example 10'4"

  Hi jacobj89654320,

  You will need Acrobat application for this, please refer to this KB document for details https://helpx.adobe.com/acrobat/using/grids-guides-measurements-pdfs.html.

  Kind regards

  Nicos

• How to set the height of row?

  How to set the height of row for my text in EA? I checked this article Edge animate help | Adding text to your project (tutorial) , but it refers to an old version of the environmental assessment.

  Hey Bruce,.

  You can set it in the user interface. Activate additional text settings in the property Panel by clicking on the arrow.

  

• How to set the doctype node using dbms_xmldom?

  Hi all
  
  IM using oracle 10g. I generated an xml file using dbms_xmldom.
  
  I need set the version xml and doctype to my xml file.
  
  XML version I've defined using dbms_xmldom.writeTofile.
  
  But not able to set the doctype... tried with dbms_xmldom.makedocumenttype... But no result...
  
  How to set the doctype using dbms_xmldom?
  
  Concerning
  Sankar MN
  
  Published by: SankaraNarayanan.M.N on October 17, 2011 05:40

  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14258/d_xmldom.htm#i1121082