How to set up and test for HTTP Basic authentication

Similar Questions

• How to set up and test the Profibus network, using the number of piece OR interface master/slave 780161-01

  I bought this card of NEITHER. I've been in contact with Comsoft which apparently is the developer of this Council. I used the Configurator II to try to build the network. The GSD file for my slave is entered. I can also see the GSD file for the master. There seems to be no obvious way to test the bus of the configuration tool. I tried the Express VI provided by Comsoft. Nothing happens. I have a purchased with endings installed profibus cable. I know that the works of cable as a another division has an another Profibus master that works with this cable how to configure correctly for you? How to test?

  Thank you

  Rick

  The problem has been resolved. In the configuration tool, after the slave device is connected to the network, all of the attributes listed under it must also be dragged over and placed in the list that appears. Never seen this step in the documentation. Once this has been done the configuration tool could initialize and find the slave.

  Rick

• How to set up an account for another user of my PC (Windows Vista) and give its right of administrator to download the program

  My daughter helped me to set up an account to my own PC with password protection. Please indicate how to set up another account for someone and give it the administrator right to download the program.

  There is information about the configuration of the accounts here:

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-understanding-user-accounts

• Capacity planning: how to configure thresholds and installation for specific measure alets

  Hi all

  I need some help/suggestions to set thresholds and alerts for settings storage.

  What I am doing?

  1. create a threshold for adapter EMC attributes as IOs, IOs read write

  2 alert if the value is less than or greater than the configured threshold

  What I've done so far?

  1. create a new attribute on page vcops-custom packages

  vcops panel-> environment-> configuration-> atribute packages

  Here are the properties of the attribute.

  Attribute name of the Package: EMC storage processor

  Type of adapter: adapter for EMC

  Resource type: SP

  Attributes configured on the storage processor

  Disc: Written (e/s)

  Selected settings are attached a screenshot.

  
  

  Question:

  Could someone help me answer following questions?

  As I receive all the alerts currently, I think I'm missing some configurations,

  could you please show me how to get alerts for the specified thresholds?

  Either way, Setup of thresholds in the screenshot is for testing purposes.

  Please show me the way.

  ARO

  Tom

  I see that you asked the question 1 in a separate thread, How to export (if possible) vCOPS information -good, check this answer (hopefully it's very good).

  Question 2: No, unfortunately not - he not automatically send mail. You found where you can configure the SMTP at UIS. On the admin page will work for sending reports and alerts triggered on ui vcops-vsphere. For the custom UI vcops alerts, you will need configure filtering with the 'filter_alertplugin '. This means that you need to configure an xml file, which is found on the analytical vm: /usr/lib/vmware-vcops/user/plugins/outbound/filter_alertplugin/conf/emailFilter.xml

  This can be difficult and post in the forum would mean a complete manual. You can check the configuration of this file in the manual on page 82 in this document: http://www.vmware.com/pdf/vcops-57-custom-ui-admin-guide.pdf

  See you soon!

• How to set the time stamp for incoming mail?

  How to set the time stamp for incoming mail?  I have windows vista. I use hotmail/windows live email. My computer has the time is set correctly. My e-mail timestamps incoming messages 7 hours a head of real time. Example: it is now 09:48. A new email is stamped as to settle at 16:48. How can I fix it? Note: the computer is correct.

  Thank you
  Laura
  2.13.2012

  If you mean the customer of email Windows Live Mail, the time stamp on messages is governed by your time zonesystem. Right-click on the clock in the lower right of the screen and select CONFIGURATION... Change your time zone, and then set your clock at the present time.

  If you are talking about the Windows Live Hotmail service, the time zone (s) used are those contained in your account data. Reach
  https://account.live.com/EditProf.aspx
  and change the time zones for the good...

  Windows Live programs and services have their own forums for support at the Windows Live Solution Center. Please address any questions you may have about Windows Live Mail to one of the forums on the right side of this page. For Hotmail, forums and responses are available via this page.

  Noel

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• where can I get advice on how to set up the iPad for a partially sighted person

  Where can I get advice on how to set up the iPad for a partially sighted person. Are there apps that can help the user, perhaps activated by voice?

  Paul,

  Go to http://help.apple.com/ipad/9/#/iPad9a2465f9and see all the topics under accessibility.

  

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• How to set up and enable the WINS and WINS-R resource records?

  How to set up and enable the WINS and WINS-R resource records?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• How to set the page template for a page in app

  I've been looking for a way to re - assign a specific page to a different page template, and I must be blind. I did it with the regions and reports, but never a whole page. The closest I can find is how to set the default page for an application model template. What I have is a printable form that they want in a specific format. I was able to code the whole thing into a region of PL/SQL, but I was hoping that I could take an existing page template and modify the model to different regions in the areas I would like to.
  
  Can someone help me find this? I have already created a copy of the page template I want to twist.

  If you are in the tree view, double-click the entry of title of page (top); If you are in the component view, simply click the edit button in the page area. Either way will take you to the screen of the Page change. in the display attributes section, you will see a Page Model drop-down list.

  -David

• How to set a default email for the reader client?

  How to set a default email for the reader client?

  [Left the forum Cloud/Installer generic for program specific forum... MOD]

  In the section in the preferences e-mail accounts.

• How to export wmv and avi for media files encode on a mac in CC2014

  How to export wmv and avi for media files encode on a mac in CC2014?

  As far as I know, you do not have... What are Windows formats which are not available on a Mac

• How to set the default printer for the user in 11i

  How to set the default printer for the user in 11i, please let me know how to set the new printer to the user, its Linux OS EBS 11i.

  Please see these documents.

  How to install the default printer for a user. [153927.1 ID]
  How to set up a default printer for a user in Oracle Applications [ID 1018856.102]
  How to set a default printer? [1237254.1 ID]
  How to configure the default printer for Applications [ID 184109.1]

  Thank you
  Hussein

• call a service of OSB http basic authentication

  Hi all
  
  There is an external Web service that requires http basic authentication.
  How to call this webservice of OSB?
  I use OSB 11 g R1.
  
  Thank you.
  
  Published by: 835266 on February 9, 2011 07:35

  Google.com-> 'oracle service bus basic http authentication'

  http://download.Oracle.com/docs/CD/E13159_01/OSB/docs10gr3/security/model.html