How to set up the WiFi Windows Vista

Similar Questions

• Satellite L500 - how to set up the WIFI connection?

  I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...

  After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...

  Can someone throw some light/provide any assistance! I'm getting desperate :(

  Thanks - my email is [email protected]

  Hey nic,.

  You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.

  First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
  Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
  Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management.

• How to set up the 'new window' tab to open the new window as the same page

  How to configure the tab 'new window' to open the new window on the same page?

  Clone of extension of the window - will also Clone a tab:
  
  http://www.Pikey.me.UK/Mozilla/?addon=CW

  Clones the current tab's address and history into a new window when the New Window command is used (and optionally into a new tab when the New Tab command is used).
  

  Compatible with Firefox 9.0. *

• Satellite M50 161 - how to set up the WIFI connection?

  I use my Satellite as a second computer. My PC is primary and is using a NETGEAR card.

  I used a card reminder in wireless cards because my home office is a bit far from the PC.

  Of course, my laptop has its own part of the ways to get online.

  I've always taken for granted connection. I don't even remember the 1st time I am connected. In fact an engineer could have done to the delivery!

  PC had problems connecting. Host Web server problems. I was expecting sort of my laptop to connect in any case, as it could / should connect to it's own wireless installation to get online. I'm not an expert as you realize.

  It dawned on me while I had no idea how to switch on and connect using the built-in wireless card that not Netgear obviously. Or I'm expecting a lot and the lap top is actually a slave to my PC connection and always will home in on the netgear connection.

  BTW, I'm back online via the netgear but would like to know. Excuse my ignorance...

  Hello

  To be honest I m a bit confused.
  I put t know exactly what you want to do.

  You want to connect the laptop to the other PC via WiFi or connect the Satellite M50 to the WLan router as usual?

  If you want to connect to the Wlan router and then activate the wireless card on the laptop with the WLan switch on the side of the laptop and the FN + F9 key combination.
  Then configure settings such as the SSID, encryption, Mac address, etc. by using windows has the configuration settings or 3rd party software like utility Intel ProSet or Atheros client utility (depending on the Wlan card).

  For more details you can visit the Toshiba Wlan Portal
  http://APS2.toshiba-tro.de/WLAN/

  concerning

• How to set up the Windows network access program?

  original title: how to set up the N A P

  How to access my windows network access program

  Hi bryan stacy,.
   
  - What version of the operating system are you using?
  -Are you talking about in the center of network share or the network connection folder?
   
  If you are referring to the network connection folder, see the following link for more information:
  Work with the network connections folder

• I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  If you bought the retail of Windows 7:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows is preinstalled with the computer:

  If you do not install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• Qosmio F50 - 10Z - how to set up the bar multimedia?

  Greetings, have a question... because after a long time, trying to make it work, I can not find the problem...

  On my laptop, I reinstall Windows Vista, download all the drivers for the Toshiba for Qosmio F50 driver page, for Vista... and even how to set up the multimedia bar? With Dolby, sound on / off, light power... He s doesn't work do not. Are there special software required? Or can I put it somewhere?

  Thanks for help

  Use this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU research of Value Added Package 1.1.19

• How to set up the order of priority of a start-up program

  Hello

  I'm using Pavilion laptop dv7-2110, Windows Vista 64 bit PC.

  Can someone explain to me how to set up the order of priority of a startup programs.

  Problem: Kaspersky Internet Security appeaps on the taskbar after Skype Torrent etc.

  Thank you in advance.

  You can access the start utility by typing "msconfig" in the start menu-> "search programs and files". From there, go to the Startup tab and you can select the programs to start and which not.

  Regarding the priority, I don't think there is a way, anyway you shouldn't be worried that your anti-virus starts just after other programs that it does not put you in danger.

  If you wish for a quick start you should probably disable most of the non-critical programs in the list, don't worry you do not break your computer if you uncheck anything that you don't know what it is, but I recommend that you don't have before checking what it is.

  Hope this helps

• How to get a CD of windows vista?

  How to get a CD of windows vista?

  If you want to buy Vista, you'd have to try online at: Newegg, Amazon, etc.

  Or try your local computer repair shop.

  If you are referring to the recovery disks, or reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Qosmio F60 - L10 - how to set up the tv with integrated antenna tuner?

  Good evening
  I have a toshiba qosmio f60, I read your answer about tv tuner.
  My question is: how to set up the tv with integrated antenna tuner? Thank you

  The tuner is already configured!
  You must use Windows Media Center.
  Here, you have to choose the tuner and need to look for available DVB - T channels.

  Notes; Signals DVB - T depends on the country and region.
  In my area I needed an external antenna because the signal is too weak.

• on the Welcome screen... How can I change the default windows live address?

  on the Welcome screen... How can I change the default windows live address?

  Hello

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
  http://windowslivehelp.com

• How to set up webmail in windows server 2008

  How to set up webmail in windows server 2008

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Server on TechNet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How can I change the Menu Windows Contacts bar to show new Contacts, new Group Contacts, etc.. ?

  I have Windows Vista with Windows Mail. In Windows Mail, my Contacts are displayed, but the Menu bar icons related to the Windows images. How can I change the Menu Windows Contacts bar to show new Contacts, new Group Contacts, etc.. ?

  Original title: Windows Mail with Vista

  Missing the Windows Contacts toolbar buttons
  http://www.wintuts.com/missing-buttons-from-Windows-contacts-toolbar

  Vista - "New Contact" and "Contact Group on new" button missing
  http://www.Vistax64.com/tutorials/186477-new-contact-new-contact-group-button-missing.html

• How to change computer name in windows vista edition Home premium?

  How to change computer name in windows vista edition Home premium?

  Hi LorenWorm,

  You can see the following article for more information on changing the name of the computer:

   

  Change the name of your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-computer-name

  Let us know if this information useful.

• The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum)

  The printer (Lexmark x 5470) cannot communicate with the computer (Windows Vista Home Premlum).  I tried these solutions below, but it still does not:

  1. ensure that the printer is powered.

  2 disconnected then reconnected the power cable from the printer.

  3 unplugged then replugged the USB cable.

  4 checked Windows Firewall setting to ensure the communication of the printer is not block.

  5. restarted my computer.

  Please help me solve this problem.

  Thank you!!!

  Have you just tried reinstallling your printer yet? Even if it was working before, file corruption or other problems can sometimes be cured by doing this?