How to solve the problem of VMWare Workstation 8 - unable to open/dev/vmmon

Similar Questions

• VMware Workstation 9: could not open/dev/vmmon: no such file or directory

  I'll have a plethora of problems installing and get VMware Workstation 9 (9.0.2 build-1031769) to work on Ubuntu 13.04 (kernel 3.8.0 - 26-generic).

  I experienced exactly the same process on my laptop and it works perfectly, while on the desktop, it seems that everything breaks. Could someone give me some kind of help / advice on how I can do to get this working. I tried full uninstall / reinstall of the software, headers of the kernel, kernel images, different kernels, patches here on fresh installs of everything I can think of. Here are the issues I encounter in the order of importance (or so I think):

  (1) whenever I try to open my new (and virtual) machine, I get the error sequence of:

  "Could not open/dev/vmmon: no such file or directory. " Please make sure that the "vmmon" kernel module is loaded. '--> 'Failed to initialize the device monitor. "->" cannot change the power state of VM: could not find a valid peer to connect to '

  
  

  (2) every time I try to run the following command to configure the modules on a completely fresh setting (reinstalled kernel, vmware) I get the following output:

  sudo modconfig vmware - console - install-all

  Stopping VMware services:

  Demon of authentication makes VMware

  VM communication interface socket family is

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmmon-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/driverLog.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/linux/hostif.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/apic.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/comport.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/cpuid.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/hashFunc.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/memtrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/phystrack.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/task.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/common/vmx86.o

  CC [M] /tmp/modconfig-G9S0TM/vmmon-only/vmcore/moduleloop.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmmon-only/vmmon.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmmon-only/vmmon.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  CP f vmmon.ko. /... vmmon.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmmon-only '.

  Using 2.6.x kernel build system.

  make: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only»

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/hub.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/userif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/netif.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/bridge.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/filter.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/procfs.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac_compat.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/smac.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmnet-only/vnetUserListener.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmnet-only/vmnet.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmnet-only/vmnet.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  CP f vmnet.ko. /... vmnet.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmnet-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmblock-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/block.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/control.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/dentry.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/file.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/filesystem.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/inode.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/stubs.o

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/module.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c: in function 'ExecuteBlockOp ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:285: warning: assignment of incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/control.c:296: warning: passing argument 1 of the "putname" incompatible pointer type

  include/Linux/FS.h:2052: Note: expected ' struct filename *' but argument is of type ' char *'

  CC [M] /tmp/modconfig-G9S0TM/vmblock-only/linux/super.o

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/inode.c:49: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:38: warning: initialization from incompatible pointer type

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c: in function 'DentryOpRevalidate ':

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: warning: argument passing 2 of 'actualDentry-> d_op-> d_revalidate' makes whole pointer without a cast

  /tmp/modconfig-G9S0TM/vmblock-only/Linux/dentry.c:104: Note: expected 'unsigned int' but argument is of type ' struct nameidata *'

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  Warning: "putname" [/ tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmblock-only/vmblock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmblock-only/vmblock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  CP f vmblock.ko. /... vmblock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmblock-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vmci-only.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/driver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/linux/vmciKernelIf.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciContext.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDatagram.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDoorbell.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciDriver.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciHashtable.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciEvent.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQPair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciQueuePair.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciResource.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/common/vmciRoute.o

  CC [M] /tmp/modconfig-G9S0TM/vmci-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vmci-only/vmci.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vmci-only/vmci.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vmci-only/vmci.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vmci-only.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  CP f vmci.ko. /... VMCI.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vmci-only.

  Using 2.6.x kernel build system.

  do: enter the directory "/ tmp/modconfig-G9S0TM/vsock-only '.

  / usr/bin/make /lib/modules/3.8.0-26-generic/build/include/ - c... SUBDIRS = $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = modules

  make [1]: Entering directory ' / usr/src/linux-headers-3.8.0-26-generic'

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/af_vsock.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notify.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/notifyQState.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/stats.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/util.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/linux/vsockAddr.o

  CC [M] /tmp/modconfig-G9S0TM/vsock-only/driverLog.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.o

  Construction modules, step 2.

  MODPOST modules 1

  Warning: "mcount" [/ tmp/modconfig-G9S0TM/vsock-only/vsock.ko] undefined!

  CC /tmp/modconfig-G9S0TM/vsock-only/vsock.mod.o

  LD [M] /tmp/modconfig-G9S0TM/vsock-only/vsock.ko

  make [1]: leaving directory ' / usr/src/linux-headers-3.8.0-26-generic'

  / usr/bin/make - c $PWD SRCROOT = $PWD. \

  MODULEBUILDDIR = postgeneration

  make [1]: entering directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  make [1]: 'postgeneration' is up-to-date.

  make [1]: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  CP f vsock.ko. /... vsock.o

  make: leaving directory ' / tmp/modconfig-G9S0TM/vsock-only '.

  Starting VMware services:

  Virtual machine monitor failed

  Virtual machine communication interface failed

  Family of VM communication interface socket failed

  File system is blocking

  Virtual Ethernet failed

  Demon of authentication makes VMware

  Cannot start the services

  (3) I often get the Ubuntu "this program has planted" messages on "/ usr/lib/vmware-installer/2.1.0/vmis-launcher" "' (this message of crash always occurs when you run the"vmware-modconfig"above command on a new installation.

  (4) at different times during Assembly and have VMware workstation on my system I get Ubuntu hangs on "/ usr/lib/vmware/bin/appLoader" and even "/ bin/su" (especially when you are trying to install - su NEVER blocks anywhere else).

  Thoughts / ideas on what is happening on earth / what could have caused this all go so downhill / how to go about fixing?

  Thank you

  Solved.

  The problem is that for another program I used gcc - 4. 4 instead of later. Restore the (by update-alternatives - config ) for gcc, g ++ and CPC - bin.

  Not a very graceful exit to have a version not valid I would say, maybe some sort of basic check could be added to ensure that the correct versions are present?

• How to disable the server of VMware Workstation share

  How to disable the sharing of VMware Workstation Server using a configuration of the registry or configuration file. I have several workstations on the network that has VMware workstation 8.0.4 install and I need to turn off sharing for all users. This function is located in preferences/Shared VMs.   I need to be able to adjust this setting to disable remote. The host computers using windows xp. Any help will be appreciated.

  It depends how you are going to access various systems is however here two options that you can include in any method you choose.  We need to create a. CMD file and the other is to use just one. REG file.

  The command Disable_VMwareHostd.cmd of Script can be as simple as:

  net stop VMwareHostd
  reg add HKLM\SYSTEM\CurrentControlSet\services\VMwareHostd /v Start /t REG_DWORD /d 00000004 /f
  

  The Disable_VMwareHostd.reg file would be:

  Windows Registry Editor Version 5.00
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\VMwareHostd]
  "Start"=dword:00000004
  

  Note: Always two empty lines at the end of the .reg file.

  The syntax of the command to execute would be:

  regedit /s Disable_VMwareHostd.reg
  

  Note that just by using a .reg file, you must always stop the VMwareHostd Service, so I would opt for the use of the method of Script command as it will stop the VMwareHostd Service and turn it off at the same time.

  I still have my put networks in place to be able to (with authentication) execute commands remotely and or push the or the files that are necessary to achieve the objective.  In a case like this, when I had hundreds of systems to change I write a binary executable to fix the problem, which would automatically run when the user logged on to the domain, but if you don't have programming skills so then using a Script command and or file Reg can / will do the job.

• How to solve the problem of 'ASM disk group is inaccessible' slave VM rac2?

  People,
  
  Hello. I want to install Oracle 11 g RAC 2 using 2 virtual machines (VM main rac1 and rac2 VM slave) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
  
  Grid and data base RAC have been installed successfully for VMS rac1 and rac2.
  I use the slave rac2 VM test data grid and CARS because rac1 disk is full.
  The problem is that the OCR file is not available or currupted in the rac2 VM slave. To know his reasons, I check permission on disc ocr as below:
  
  [ora11g@rac2 bin] $ pwd
  / U02/11g_db/ora11g/racdb/bin
  
  [ora11g@rac2 bin] $ srvctl start asm
  
  RPRC-1070: could not verify if the ora.asm resource is registered
  Cannot communicate with crsd
  
  [ora11g@rac2 rac2] $ pwd
  / u01/app/Grid/log/Rac2
  
  [ora11g@rac2 rac2] $ cat alertrac2.log
  
  Last lines:
  [/ u01/app/grid/bin/cssdagent (5779)] CRS - 5822:Agent ' / u01/app/grid/bin/cssdagent_root "disconnected from the server. Details at (: CRSAGF00117 :) in u01/app/grid/log/rac2/agent/ohasd/oracssdagent_root/oracssdagent_root.log.)
  2012-03-20 13:44:55.914
  [ohasd (5149)] CRS-2112: the service ODE started on node rac2.
  2012-03-20 13:44:58.588
  [ohasd (5149)] CRS - 8017:location: / etc/oracle/lastgasp has 72 Advisory reboot log files, 0 were announced and 0 errors
  2012-03-20 13:45:07.555
  [ohasd (5149)] CRS - 2772:Server "rac2" was awarded to 'Free' the pool.
  2012-03-20 13:45:10.108
  [ohasd (5149)] CRS-2302: failed to get profile negotiators. Error CLSGPNP_NO_DAEMON (the demon GPNPD does not work).
  2012-03-20 13:45:10.251
  [gpnpd (5368)] CRS - 2328:GPNPD began the rac2 node.
  2012-03-20 13:45:13.037
  [cssd (5443)] CRS - 1713:CSSD daemon is launched in cluster mode
  2012-03-20 13:45:37.132
  [cssd (5443)] CRS - 1707:Lease acquisition for node rac2 number 2 completed
  2012-03-20 13:45:37.727
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK3; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:37.986
  [cssd (5443)] CRS - 1625:Node rac1, number 1, was closed manually
  2012-03-20 13:45:37.991
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK2; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:38.633
  [cssd (5443)] CRS - 1605:CSSD file to vote is online: ORCL:ASMDISK1; details in u01/app/grid/log/rac2/cssd/ocssd.log.
  2012-03-20 13:45:56.956
  [cssd (5443)] CRS - 1601:CSSD Reconfiguration is complete. Active nodes are rac2.
  2012-03-20 13:46:00.557
  [ctssd (5834)] CRS-2403: the time synchronization Service on rac2 host Cluster is in observer mode.
  2012-03-20 13:46:00.576
  [ctssd (5834)] CRS-2407: the new Cluster Time Synchronization Service reference node is host rac2.
  2012-03-20 13:46:01.000
  [ctssd (5834)] CRS-2401: time synchronization Service Cluster started on host rac2.
  2012-03-20 13:46:11.097
  [crsd (5856)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:12.085
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:13.338
  [crsd (5925)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:14.217
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:15.438
  [crsd (5940)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:16.313
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:17.539
  [crsd (5955)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:18.392
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:19.537
  [crsd (5988)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:20.468
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:22.636
  [crsd (6003)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:23.615
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:24.781
  [crsd (6022)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:25.713
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:26.885
  [crsd (6037)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:27.799
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:29.021
  [crsd (6052)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:29.925
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:31.136
  [crsd (6067)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:32.040
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:33.247
  [crsd (6082)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/grid/log/rac2/crsd/crsd.log.
  2012-03-20 13:46:34.172
  [ohasd (5149)] CRS - 2765:Resource 'ora.crsd' failed on the server "rac2.
  2012-03-20 13:46:34.173
  [ohasd (5149)] CRS - 2771:Maximum attempts to restart the resource 'ora.crsd '; does not restart.
  [ora11g@rac2 rac2] $
  
  The output of alertrac2.log, we have seen disk group ASM is inaccessible. So my question is:
  
  How to solve the problem of "ASM disk group is inaccessible" in the rac2 VM slave?
  
  
  Thank you.

  user8860348 wrote:
  People,

  Hello. Thanks much for the reply.

  Yes. I put the entry "SQLNET. AUTHENTICATION_SERVICES = (NTS)"input file sqlnet.ora.

  I ran the commands below:

  [ora11g@rac2 bin] $ pwd
  / u01/app/Grid/bin

  [ora11g@rac2 bin] $ ps - ef | grep pmon

  16219 ora11g 8602-0 12:29 pts/2 00:00:00 grep pmon

  [ora11g@rac2 bin] $

  [ora11g@rac2 bin] $ export ORACLE_SID = + ASM2
  [ora11g@rac2 bin] $. / sqlplus / as sysdba

  SQL * more: Production version 11.2.0.1.0 Fri Mar 23 12:33:15 2012

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Connect to an instance is idle.

  SQL > startup pfile = ' / u01/app/grid/dbs/pfile ".
  ORA-01031: insufficient privileges
  SQL >

  Sign in as SYSASM as

  . / sqlplus / as sysasm
  >

  As we see above shows the command $ ps - ef | grep pmon, my question is:

  First of all, are ' 16219 8602 ora11g 0 "process ID?

  Secondly, we need to kill one by one? For examples: kill-9 ora11g? Kill-9 16219?

  Laughing out loud. It's not the running process.

• Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  Someone broke into my computer informing me that he has been infected with malware, viruses, etc. and advising me to contact a phone number, also send me a live conversation on how to solve the problem. He claims to be an Apple / Safari servic

  This kind of message is a scam. Do not meet it.

  Force Quit Safari, then restart Safari while holding the SHIFT key.

• My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

  My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

  Settings > messages > iMessage turn off then turn it back on...

  If it does not sign of your apple under messages ID.  Settings > General > reset > reset all settings (will not erase data).

  Then log in messages

• How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

  Nice day

  How to solve the problems of windows 10 shut down (power, lighting the keyboard is always on)?

  with regard to my question above. I need to hold the button of power for 5 seconds to completely shut down my laptop. even restart or sleep does not work well. I upgraded a real victory 8.1 to 10 free victory by that windows app reservation offered. IM using acer aspire v5 - 573 g i7, version gt750m, Finnish keyboard

  solutions, I tried to random searches that did not work for me.
  1 unchecking quick stop to power options
  2 disabling hibernation in cmd (types a code forgot what I have)
  3. update all drivers and bios with sites acer official drivers, driver pack solution 15.8 and utility driver update intels
  4 decommissioning intel management engine components driver 11 to 9.5
  5. go to the bios and reset to the default settings
  6 make a shortcut of "shutdown" with codes e.g. shutdown /s /t 0
  7. click Update stop

  IM thinking of reinstalling windows 10 via recovery which removes applications, files, drivers, etc. and hope this solves. I can't roll back to win 8.1 because ive done this reset before you completely clean out my system of win random 8 and trashes the restore option was gone.

  Thanks in advance

  Hello/Hallo wuschel93,

  exactly what I had. Stop number appears only after a certain time the laptop running.

  The problem is INTEL MANAGEMENT ENGINE RELATED V.11!

  I fixed it with uninstall Intel Management Engine Version 11. Windows will then install version 9.5 automatically. After that I turned off the automatic update of the driver for this device. You can also install 9.5 without uninstalling the old one, it wil crushed.

  Other manufactures also have this problem, but while Acer is still asleep, they provide a solution (including download links):

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/sleep-and-shutdown-issues-after...

  Maybe there are any other issues that result in the same problem. But in most cases, it's the answer. The thread Starter maybe forgotten to disable the automatic driver update or made installation of v9.5 evil?

  TEPCO

• How to solve the problems highlighted in each journal in the issues of the CBS

  Hello

  Please could someone help me decipher the CBS logs for two of my Vista machines and tell me how to solve the problems highlighted in each journal.

  Vista 1 machine has Vista Ultimate x 64 SP2 installed and has been implemented in the following way:

  • Installed Vista Ultimate SP1 from DVD
  • Apply all updates important, recommended, and optional through Microsoft Update
  • Applied SP2 via Microsoft Update
  • Apply all important updates, optional and recommended through Microsoft Update after that

  Machine Vista 2 has Vista Ultimate x 86 SP2 installed and has been implemented in the following way:

  • Installed Vista Ultimate SP1 from DVD
  • Apply all updates important, recommended, and optional through Microsoft Update
  • All the different ways to install SP2 and had no success in which I used the followed by the fix corrupt system analysis tool Pack of language without problems were detected but had to reinstall OS in order to reactivate Windows new
  • Reinstalled Vista Ultimate SP1 DVD
  • Installed SP2 with download of the Microsoft not by Microsoft Update website and this time it worked
  • Apply all updates important, recommended, and optional through Microsoft Update

  I searched on Google for months on how to solve the problems highlighted in the CBS logs but got too hypnotized and decided to consult you on how to solve the problems. I forgot to mention also that 11 updates of Windows would not apply via Microsoft Update on both machines and apply them manually in which they worked.

  Finally please can you give me a link to download CBS logs.

  Your help would be much appreciated.

  Thank you very much

  RocknRollTim

  https://social.technet.Microsoft.com/forums/Windows/en-us/54bff6db-0797-4655-A331-a86510c1b291/Vista-CBS-log-issues?Forum=itprovistasp and OneDrive (SkyDrive) for download to use collected files and after shot/screenshot. (Updated: 16/01/2012)

• I updated my drivers and now my computer runs very slowly. How to solve the problem?

  I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.

  What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?

  "My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »

  Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.

  This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.

  and while I always count should not slow down the system... You never know.

  "What services I need to run.

  
  Just to keep the correct terminology-

  Services is the area where you stopped the service of bitlocker.

  The start is where you keep things from loading when you start in Windows.

  -Most of the time what's in Startup deactivation is something personal need, but there are some things that

  I must be on the left.

  I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother

  Discover what they are doing.

  I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.

  I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that

  uses it it launches automatically.

  The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with

  Windows.

  -Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.

  I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.

  (Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)

  To stop or disable a Service manually, tap - services.msc - in the run command to open

  the main window of Services.

  There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update

  I select the option notify me, but not to install it automatically.

  I always preferred this with any updates, including Windows updates as there is less chance of a corrupt

  Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.

  -Registry. In the control run, type - regedit - and browse the registry with the file path in the

  previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the

  backup to change the value to what is current would be faster than navigating to the key again.

  -When playing around with things you are not familiar with creating a System Restore point before you

  making these changes is a good insurance policy.

  If you don't know how to create a system restore point - time to do some research.

  In fact, all of the above is covered by tons of tutorials out there in the www.

  SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the

  MFG web site.

  Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.

  and can reduce the life expectancy SSD a bit (there is debate on gravity)

  More research for more details. D

  -If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.

  -Here's another tip for when you are not sure of the impact of deleting files.

  Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move

  the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.

  This method protects to empty the trash accidentally and lose the file/folder.

  -Speaking of deleting the file. A great TEMP folder can slow things way down.

  Run Windows, Disk Cleanup . This will remove many files in the Temp folder.

  Or, for a full, clean, go to the - your User\AppData\Local\Temp

  Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).

  -Defragment your HARD drive

  -Run the Zig - zag Kit you'd use again and analyze the results.

  It was a long, huh!

  .

• I can't upload an image under license. I always get the image in low resolution. How to solve the problem?

  I can't upload an image under license. I always get the image in low resolution. How to solve the problem?

  Follow these steps to download or save in the library: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Anyone know how to solve the problem, when he says scratch disk is full?

  Anyone know how to solve the problem, when he says scratch disk is full? don't do anything :/

  Go to Edition > purge > all

  This will clear all of your history and Clipboard, thus freeing the scratch disk space.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data?

  What is the maximum number of characters that a 2D barcode can have with the symbology PDF417 Matrix? How to solve the problem of code bar having too much data? I'm incorporating data of the bar code under a button field. But when the data is large, the problem occurs.

  Apparently the theoretical capacity of the PDF417 barcode is 1850 characters or numbers in 2710. Of course, the actual capacity depends on the size - more square inches, more data. But before the theoretical limit, that you can reach practical limits in scanning technology so test carefully with all models of planned barcode scanner.

• How to solve the problem of Oracle SQL Developer Connection?

  People,
  
  Hello. I use the Oracle 11 GR 1 material database. The database https://localhost.localdomain:1158 control console / em works correctly. I can create a database and a table with success.
  
  My OS is Linux and connects to the internet successfully.
  
  In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
  
  Connection name: DB1 (is my database name)
  User name: SYS (this is the user name I used to connect to the Console)
  Password: SYS (this is the password used to connect to the Console)
  Connection type: basic
  Host name: localhost
  Port: 1158
  SID: DB1 (it is created during the installation of the database)
  
  But the error message: "status: failed - IO exception Connection Reset."
  
  Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

  user8860348 wrote:
  People,

  Hello. I use the Oracle 11 GR 1 material database. database Control Panel https://localhost.localdomain:1158 / em works correctly. I can create a database and a table with success.

  My OS is Linux and connects to the internet successfully.

  In order to execute SQL statements. We use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:

  Connection name: DB1 (is my database name)
  User name: SYS (this is the user name I used to connect to the Console)
  Password: SYS (this is the password used to connect to the Console)
  Connection type: basic
  Host name: localhost
  Port: 1158
  SID: DB1 (it is created during the installation of the database)

  But the error message: "status: failed - IO exception Connection Reset."

  Can any folk tell me how to solve the problem of Oracle SQL Developer Connection?

  user name: sys
  password: enter_your_correct_password given at the time of the installation of oracle

  role: select sysdba if you would connect as sysdba otherwise select normal for users other than the sys

  HostName: Enter your ip or hostname of the oracle example server address:-192.168.11.12

  to find the terminal/command prompt open hostname in oracle installed machine
  type---> hostname

  type ping hostname--->

  You can find the IP address of the server

  Port number: 1521 (default)---> I guess, otherwise check the port number in the file tnsnames.ora under your ORACLE_HOME/network/admin folder

  SID: DB1

  try it
  Good luck

• How to solve the problem of "too many redirects?

  How can I solve the problem of "too many redirects" on my Mac Book Pro running OS X Yosemite worm. 10.10.5?

  Safari: "unable to open the page, too many redirects."