How to start a third less wipe in from the edge of the fram?
Hello. I hit up a strip of 35mm film cartridge and film to use as one-third less. I would like the film seem to come out of the tank, which will be placed just inside the edge of the image, but my problem is that I don't know a good way to prevent the film showing on the left of the tank at the entrance. I know I could copy the clip below the tank and place it between tank and film and garbage matte on everything other than the little I would need to hide the film entering the frame to the left of the tank, but is there a more elegant solution to control the film's apparent entry point?
BTW, I asked the same question on DVInfo about eight hours ago, but no response as I type this.
Try a linear wipe
Tags: Premiere
Similar Questions
-
How to start firefox in safe mode automatically from the command line
This is for Windows XP, firefox 19
See also:
-
How to start a job using DBMS_SCHEDULER depending on the result of other JOBS
How to start a job using DBMS_SCHEDULER depending on the result of other JOBS
For example I have two jobs A and B of EMPLOYMENT, I would like to start JOB B only when a JOB is complete, is an option like that?
Hello
Yes, you can create a channel with the Scheduler, see the documentation:
Creation and management of channels of employment
http://docs.Oracle.com/CD/E11882_01/server.112/e25494/scheduse.htm#ADMIN10021
-
How can I get WIndows8 TouchSmart to boot from the recovery disc
How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.
You may need to change the boot order to boot from the DVD drive first. The steps to do this are in the document below.
http://support.HP.com/us-en/document/c00364979
These are recovery disks made by the recovery discs sent by HP? They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system? They should be able to start up to a point where the error message will be displayed.
-
How can I delete several clips at once from the timeline
How can I delete several clips at once from the timeline?
Thanks, Dan
Shift-click or command-click to select if they are contiguous. Then press the delete key.
Or select them and use the keyboard shortcut command + X.
Or select them in the Index of the Timeline and use the key DELETE or command + X.
Russ
-
How will I know my ket of product from the ID for a Windows7pro?
How will I know my ket of product from the ID for a Windows7pro?
I have format my pc and I forgot to write product key and I have only the idproduct.
Original title: Protuct ID
Unfortunately, if you have formatted the computer, there is no way to know or the recovery of the product key.
Lost or misplaced product key (certificate of authenticity)
http://support.Microsoft.com/kb/824433
How to get a replacement product key?
To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:
http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS
-
How can I configure my computer to boot from the CD Rom drive
I have Windows 7 home version and I have a problem with booting from the cd rom. I did a cd bootable for a work at home job, but it will not work properly. It works fine on the desktop of my sister, but not my laptop. What is happening is the CD loads when I restart my computer, but then it goes to a black screen and just stays there until I have eject the CD. I can hear the CD running, but I get nothing after the initial splash screen. I have reset the bios to make sure that the CD-Rom was placed up in the boot parameters. Any ideas why this CD will not completely loaded? Thanks for any help you can give.
GaylePlease note, in order to install Windows 7, you must have a DVD player, if you have a CD-ROM drive, which will not work.
To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:
http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/
-
I have photoshopCC, but some how I get pop ups saying that my path for cs6 is expires, and then I buy and get a licience no, well I have not because I have a year of photoshop and lightroom CC. How can I get rid of this message from the Marie trial please
Go to Photoshop forum
-
I use CS5.1 and installed a new hard drive. during the migration, PS now will not work. How can I reinstall? installation initial performed from the internet, no discs.
-
I have 2 sony camera popular with the AVCHD file structure. The two cameras are the same. How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0
Now I see the date taken in the import screen until I click "ingest". When in the trash, this option is there, but no metadata in there. It is therefore impossible to import images from two cameras and have these sorted.
How can I get this sorted out before, so I can export for the first?
Thank you. Tom van den Dool
Hi Tom,
How can I sync 2 sony AVCHD images from the camera on the "date" as a prelude and import it in first pro? Im working with 6.0.
Sorry, you can not do as a prelude. You can request a feature here: http://adobe.ly/feature_request
Thank you
Kevin
-
How to re - install Adobe Photohop Elements 8 from the original disk?
How to re - install Marcus Photoshop Elements 8 from the original disk. All the disk wants to do is to uninstall the program. [If I did I would lose all my photos?]
Thanks in advance for your help.
Tom Barker
< deleted by the moderator >
No, you won't lose your photos. but you can prepare your catalogue for migration, http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html
and if you follow the 7 steps you can download a free trial here: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
and activate it with your serial number.
If you have a problem from the download, you follow the 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).
failure to obtain this cookie translates into an error page displayed after clicking on a link on prodesigntools.com or initiates the download of an incorrect (e.g., current) version.
-
Adobe Flash Player prevents me to display videos because I don't want to share my personal computer storage.
Wholesale! constitutional question here! Can I use the Windows Media player this Adobe pirate intead? How, please? Or any other way to overcome this in-your-face PEST hijacker - Adobe Flash? * E-mail address is removed from the privacy *
Hello
Flash Player and Windows Media Player are not interchangeable.
Like many things on the web, the Flash Player local storage can be put to bad use. This does not necessarily mean the Flash Player without scruples or bad product - it's the sites Web/people who abuse of this (depending on your point of view).
You can configure Flash Player to block local storage on your computer. This does not necessarily all the features of Flash Player - for example with my set of Flash Player to block local storage I can still see videos on YouTube.
The controls for the Flash Player local storage can be found here: *
Start-> Control Panel-> Flash Player (32-bit) (Tab instorage )
There is a good explanation of privacy and local storage of Flash Player here:
I hope this helps.
* You have not stated your version of Windows, so it's Windows 7.
-
My laptop does not start at the top. It indicates that the following file is missing or damaged WINDOWS\SYSTEM32\CONFIG\SYSTEM.
Download this file from the Microsoft Web site. I put the XP CD in and it starts downloading files but it asks what windows installation I want to and don't gives me one option other than press "Enter" to abandon.
See if anything here helps-
How to recover a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545Install and use the Recovery Console in Windows XP
http://support.Microsoft.com/kb/307654See also
How to Troubleshoot Registry Corruption issues
http://support.Microsoft.com/kb/822705How to fix a missing or corrupt Windows\System32\Config\System file
http://xphelpandsupport.MVPs.org/how_do_i_repair_a_missing_or_cor1.htmTaurArian [MVP] 2005-2010 - Update Services
-
How todownload free vista ultimate x 64 windows from the microsoft site?
Please help me because I am trying to download windows vista ultimate 64 bit OS from Microsoft, but I'm not succeed
Please help me to download this windows.Hello
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
And Microsoft sells more Vista; If that's what you're looking for.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
How to make that guest OS is separated from the host
Have Win7 (16 GB of ram, 1 TB HD space) is a part of a Small Business Server 2011 domain. I have a problem with the SBServer and want to look at a new facility to see certain folders permissions have by default. (user redirection folders does not, even if I set permissions per technet article). Network is 192.168.1.x, can I install a Small business Server 2011 guest (that would be a trial of MS download) and make sure that it is completely separated from the win7 Host and, of course, the field. Then create one or two comments more OS on this same machine win7 and have these comments of BONES join Small Business Server customers? If so, how do I set that up?
Thank you, Steve
Yes it's doable... read the documentation! Setting up an isolated test with virtual network configuration is no different, so do it with a physical network. In particular read Chapter 7 "Configuring network connections" in getting started with VMware Player (PDF).
Maybe you are looking for
-
My system crippled Windows Update
my system crippled Windows Update. Lights on. All the tests of transmitted material. Try to restore but it does allow me to enter a restore point and none come up when I click on the show more restore points box. What should I do?
-
Hello! I ve was responsible for the research and reading for hours - but probably in the wrong places. I think it's a piece of cake for many of you: I now have a small example of what I want - to measure several "tracks" (up to 10) and post them on t
-
Photosmart C7180: Photosmart Software Suite
I have a Photosmart C7180 all-in-one printer. I just got a new laptop and am trying to install the printer driver. The Software Suite, has it that the base driver is not working? I don't know which one to install.
-
ACS 5.2.0.26 with two areas
I try to spend 4.2 ACS production plant that uses Windows Server installed on GBA as authentication mechanism underlying to 5.2 ACS who joined the field. I have read several posts and that you have not yet found a solution to my problem. So, we have
-
CUVC in first Collaboration Manager
I am trying to record a CUVC 3515 MCU 12 (version 5.7.0.0.21 of the software) on a Cisco Collaboration first, Manager 1.1.0.10719 but I am faced with an http error. Could you help me on this topic? Please find attached print of the CUVC configuration