Random processes using 50% CPU (dll files)

Similar Questions

• How to include a .lvlib in a generation that was created using a custom .dll file

  I am trying to build an executable in LV2010 which uses a .lvlib which was created using a Keyence .dll file. I added the .lvlib to the source as "Still included" files and I also added all the files "Always included." library .vi I always get the error message saying "Lack the external function" during the execution of the program. The executable seems to open properly on the development computer, but not on a secondary computer. Any ideas?

  Hi Harris,

  I would like to clarify a few points.

  -With all these configurations that you described above, the executable file worked properly on the development computer?

  -L'application works correctly on the development computer outside a build specification, just running in LabVIEW?

  -Have you tried to deploy the executable on multiple computers, and you see the same error on every computer other than the development computer?

  -Is there a software that must be installed so that the TMIF.dll to work? This software is installed on the deployment computer?

  It seems that the DLL is included with success, but for some reason, the function appears as missing. Also, I noticed that the error message has a: C at the end of the message, which makes me wonder - is this a C DLL or a Windows DLL (.NET)?

• Svchost.exe - k netsvcs process uses 50% CPU at startup of Windows 7 PC

  Hello

  Can someone advise? I have a 32 bit Windows 7 laptop and when it is on, svchost.exe - k netsvcs will run and make use of 50% or more of the CPU and finally up to several hours.

  It is a very annoying problem where even if I complete the process using the Task Manager, it reappears shortly after. A reboot also sees a resumption of the process.

  I traced this problem to the (wuauserv) Windows Update I had to turn off to avoid the recurring problem. But as this is not an optimal solution, I'd quite like to know how to solve this problem permanently.

  Thank you

  Martin O'Shea.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Make sure that KB3020369 is installed, otherwise install it manually.

  Win - 7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46827

  Win - 7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817

  Then install manually KB3172605 M$ plays cat and mouse with this download to update if the link and the download does not work, you will need to use Internet explorer and get instead of the catalog

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://support.Microsoft.com/en-us/KB/3172605

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53335

  Win-7 64-bit.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53332

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• VTEncoderXPCService the process using 100% CPU, slowing down of the MacBook Pro to a crawl

  I'm running OS X 10.11.4 on my mid-2009, 2.26 GHz Core 2 Duo 13 - inch MacBook Pro, updated updated to 8 GB of RAM. For these last days, a process called 'VTEncoderXPCService' has been constantly running like crazy on my Mac, using about 150% CPU. This slows down my Mac to a crawl, especially Safari, where I usually end up with beach balls every 20 to 40 seconds. I need help [figure out what is the cause, as my Mac is basically unusable because of the drop in performance.

  This is a background process that converts the video in a photo or iMovie library. If an iOS device is connected, please disconnect. In the iCloud system preferences pane, uncheck that marked Photos. The activity should stop.

• doc2text process using 100% cpu for a long

  I have encountered this problem before and never received a satisfactory solution.
  
  When we publish some PDF documents via collab in KD, doc2text process on our servers portals (also our API) turn at 100% of the CPU for about 90 seconds. This causes the publication of collab to fail, so we resort to directly download the file to the KD via downloading content.
  
  (1) why doc2text works on our servers of portal in the first place? Is this a result of the service portal server or api? If I move the API service off the coast to another machine, which will remove that pig of our front end servers CPU?
  
  (2) has anyone seen this before, or found a way around it? Y at - it a newer version of doc2text in gR 10, 3 that is not so terrible?
  
  I'm about to move to 1 - cpu virtual in our new environment, so any process that takes up 100% of the CPU will kill performance.

  Joel,

  Collab makes an IDK call to publish the document, so it does not hit the API service. For this reason, I propose the wide API service to another server so that the portal is not affected.

  HTH,
  -Verhee

• CS6 launches multiple gpusniffer processes using the CPU constantly

  I don't have a card Nvidia (ATI Radeon 6670). After working with CS6 for a few hours, there will be 15 or so gpusniffer.exe processes running in the background, each 2 to 20% CPU consumption. They continue to run after the closure of the CS6. Given that I don't have a taken GPU supported anyway, is it possible to disable the probe gpusniffer altogether?

  Thanks, I filed a bug.

• Need help with the fix KB 900243... for use high CPU with file W3WP.exe

  SBS 2003 Enterprise.

  This hotfix contains two files:

  1 WIndowsServer2003-KB900243 - x 86 - enu.exe
  2 WIndowsServer2003-KB900243 - x 86-symbols - enu.exe
  Which of them install?  Or if the two, what order.
  Thank you.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• How to register a DLL file?

  How to register a DLL file?  What is the process to register a DLL file?

  Hello

  What operating system is installed on the computer?

  a. click Start, type Command Prompt and then click command prompt.

  b. click on run as administrator. If you are prompted with a logon, enter administrator credentials. Otherwise, click continue to allow the action.

  (c) in the command prompt, type regsvr32.exe, and then type enter the path of the .dll file to be saved. (e.g., regsvr32.exe C:\Windows\syswow64\msxml4.dll)

• MacBook Pro random high utilization of the processor (iCoreService/DCAManager using + 400% CPU?)

  Hello

  I'm running an Early 2011 Macbook Pro running OS X Yosemite 10.10.5 with a 2.2 GHZ Quad Core i7 processor 1 TB Samsung 840 EVO SSD and 16 GB of RAM Crucial. I noticed for about a month, I'm going to do a simple task or two on my Mac, then all of a sudden I noticed spikes CPU temporary, 90 + degrees C and the kick of fans trying to cool high speed. Well, I don't know why this is happening when I do nothing to justify a high utilization of the processor. I'm used to the CPU running hot when I do something intensive graphic as running Autodesk Inventor CAD software, run a machine virtual or even watch a 1080 p @ 60 fps video on youtube (it is the lowest resolution that requires the Mac switch to the dedicated AMD Radeon 6750 M GPU that usually eventually warm it quickly) , but this use high random that happens when I have Mail open in the background, and one tab open with a 720 p @ 30 fps video Youtube open (or even less). I took a few screenshots of the activity Manager indicating the best processes and Intel Power Gadget indicating the temperature of the CPU:

  

  

  

  Does anyone know what are iCoreService and/or DCAManager and why they use so much of my CPU when this happens? And someone has encountered this weird behavior before? Thanks in advance!

  The most likely cause is an applicztion you have running that is corrupt and forcing them to use the CPU too. Were you able to kill the process in activity monitor? If you have not yet tried to do, so I'll try that first. I would also try to quit all open applications.

  If you start the computer in Safe Mode , you can test if the problem is still there. If it isn't, usually means something that is managed by you start-up or an application that you use may be the cause.

• build a Visual Studio C++ 2008 .dll file and use it in labview

  Hello

  A few days I tried to create a .dll with c code file and use it with a call library function node in LabView. But I could never do it with success. I use Visual Studio 2008 and labview 8.6.

  I had a look at some tutorials, but they were written for different versions of Visual Studio. And because I'm a newbie to Visual Studio, it was difficult for me to do in another version the turtrial is written for.  However, I have a lot of experience in programming c for processor atmel (AVR Studio).

  Is there someone who could help me step by step hollow Visual Studio C++ 2008 and later versions also help me configure my call library function node?

  I'm form Switzerland, my English may have a few errors. Sorry for that.

  What I've done so far:

  * I opened VisualStudio 2008 and created a new project.

  * For this I used the model ' class library ' (because I live in Switzerland, I have German versions of visual studio, and labview. So, probably, it is not called exactly "class library" in the English version)

  * The project is created and I can insert my functions.

  * but here I have some difficulties: in my tutorials, they say that a function should be defined as follows:

  type name (arguments) WINAPI

  {

  code

  }

  for example

  unsigned int WINAPI multiply (unsigned char, unsigned char b).

  {

  unsigned int c;

  c = a * b;

  return c;

  }

  but when I try to compile the project I get the errormessage:

  SyntaxError: missing; prior to "multiply".

  * When I remove WINAPI, it creates the dll file

  * but when I try to open this dll with a "call library function node" in labview, I get an errormessage labview, that my multiply function is not found in the dll.

  I'd be happy if someone could help me with this.

  You need adorn your statements with extern "C". LabVIEW manages only the C dll; It cannot manage the C++ dll, which is what you will get if you do not have extern "C". I do not understand why you are trying to use 'stdcall '. For a normal DLL just stick to C-calls.

  The link provided by Red rooster is for Visual C++ 6, which is a very old version. I suggest you look at instead, because it deals with Visual Studio 2005.

• should what program I use to open a dll file?

  My computer has been recently cleaned and I replace some dll files, but I can't open them. What do I need?

  Hello

  1. why you try to replace any dll file?
  2 are. what dll file you referring?

  There is no Microsoft program or utility that can help you read the dll file. Please use your favorite search engine to search for the same thing.

  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Hello I am a photographer of Canon.  I use Bridge (CS5) to process my raw to JPEG files.  I take on a second photographer who shoots Nikon (D800) and I'm not currenty able to see or treat his images.  Can you please help?  Thank you!

  Hello I am a photographer of Canon.  I use Bridge (CS5) to process my raw to JPEG files.  I take on a second photographer who shoots Nikon (D800) and I am not currently able to see or treat his images.  Can you please help?  Thank you!

  CS5 to create problems to update the menu help.  Best to download and install manually.

  http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=5373&FILEID=4999

  Another problem with CS5 was the Bridge opens as a process in the background and must be closed in the taskbar > hidden icons before updating.

  Good luck

  In fact, you have had a chance, I'm surprised that the D800 goes back to CS5 and ACR6.7

• I have a windows xp, I can't start my computer needs dll files using core plese

  I need dll files required for the core windows xp lab plese top of page help

  Hello

  See the article:

  http://www.windowsbbs.com/Windows-XP/46785-Windows-wont-startup-load-needed-DLLs-kernel.html

• Why have I not hundreds of copies of gencomp.dll files on my hard drive?

  Something generates a directories on my directory to the root of the C: drive approximately every 2 hours or so that contains a copy of gencomp.dll. The name of the directory appears to be a random pattern of about 20 to 30 digits hexadecimal digits. He did this for about 10 days now and I have about 135 different directories in the root directory that match this description.

  There is a gencomp.dll file in the directory C:\WINDOWS\Microsoft.NET\Framework\v3.5\Microsoft SP1\ of Microsoft .NET Framework 3.5 which seems to be the same file

  This is an OS XP with Service Pack 2 installed.

  I have Symantec Endpoint Protection installed on the computer and a virus scanner and found nothing.

  It does not appear to be a specific problem right now, with the exception that it is make items in the directory root hard to find filled it with several directories, but I am sure that the computer will suffer performance issues later.

  Any idea of what could be causing it to...

  Hello

  Have you done any recent change in software before these questions?

  The gencomp.dll could be part of recently installed software.

  Method 1:

  I suggest you use the disk clean to remove all unnecessary files from the computer.

  Using disk cleanup

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_disk_cleanup.mspx?mfr=true

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  I suggest you to perform an analysis of your computer online by visiting the link below:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Hope this helps and keep us posted.

• Random crashes application of kernel32.dll kernelbase.dll and ntdll.dll

  I am experiencing appcrahes randomly in my Windows 7 laptop, I work the following configuration:

  Laptop: Asus K55VM R500V
  Windows 7 Home Premium 64 bit - SP 1 - Build 1130
  Problem:
  Accidents occur at random times with random applications. Which can be either my Steam Client, Skype, Google Chrome, QQ International Messenger, or Windows Explorer. It doesn't matter if I use them all at the same time only two or what I do with my laptop. Often when I play the video game heavy (i.e. Far Cry 3) my laptop is fine, but all simply using my email can cause a malfunction.
  I used the logger to see what was causing the crash as Solutions Windows only tells me to update my programs (all programs are up to date) and I discovered that all accidents are caused by Kernel32.dll Kernelbase.dll & (only for third-party software) and ntdll.dll (Windows Explorer only). Another thing that might be important, is that, generally, applications fail when you do
  . For example, I use Skype, I feel a freeze, Windows tells me that the program has stopped working, when I check my other programs, I see that the rest I was running also closed.
  The Eventviewer error codes:
  The following codes appear in my event viewer, whenever my requests fall I have the same error codes over and over again.
  The failing application name: Explorer.EXE, version: 6.1.7601.17567, time stamp: 0x4d672ee4
  The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
  Exception code: 0xc0000005
  Offset: 0x00000000000587d8
  ID of the process failed: 0xd78
  Start time of application vulnerabilities: 0x01ce26069474b546
  The failing application path: C:\Windows\Explorer.EXE
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 0e2ce05c-9264-11e2-ad10-10bf482cb231
  Name of the failing application: Skype.exe, version: 6.3.0.105, time stamp: 0x512fa5e2

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0 x 638

  Start time of application vulnerabilities: 0x01ce248ff0e47f10

  The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0af4d3f9-9089-11e2-92ab-10bf482cb231
  Name of the failing application: chrome.exe, version: 25.0.1364.172, time stamp: 0x513d06c4

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0x1b54

  Start time of application vulnerabilities: 0x01ce249249287ef0

  The failing application path: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0af4ace9-9089-11e2-92ab-10bf482cb231
  Name of the failing application: steam.exe, version: 1.70.46.67, time stamp: 0x5143b70d

  The failed module name: kernel32.dll, version: 6.1.7601.18015, time stamp: 0x50b83c89

  Exception code: 0xc0000005

  Offset: 0x000111e2

  ID of the process failed: 0 x 1348

  Start time of application vulnerabilities: 0x01ce248a5e2a817e

  The failing application path: C:\Program Files (x86)\Steam\steam.exe

  Path of the failing module: C:\Windows\syswow64\kernel32.dll

  Report ID: 0b0500d6-9089-11e2-92ab-10bf482cb231
  What have I've tried so far...
  I started looking for answers to my problem, and I tried the following:
  -Updated all my drivers
  -Device Manager checked manually to the required updates
  -J' checked my files system at the command prompt
  -J' I made sure all the software has been updated, including windows of course
  -J' did a clean install of Windows
  -After that the problem remains I did Memtest86 v4.2 (just to be sure I pass for 35 times)
  -Important to know are that since the beginning, I bought this laptop (5 months ago) I've been running Norton 360 and I am now updated, so any virus or malware is also out of the question.
  I think this would be it, it's really driving me crazy... I think I have almost tried everything and I don't know what else to try. The warranty only covers hardware failures and like memtest86 passed, I am not eligible for any support software at my retailer.
  I would be really grateful for any help or suggestion, if you need other information or error logs please let me know.
  Thanks in advance!
   

  Hi Joepvan der Poel,

  The question seems to be because of two system knowledge of kernel32.dll and ntdll.dll files

  Since you did a clean install of Windows 7 and still the problem reappears, it seems that the version of Windows installed on your computer and on the aswell of media is corrupt. That's why I suggest you get a copy of these two files, kernel32.dll and ntdll.dll of another trust worthy Windows 7 computer running the same version, edition and service pack and stick it in the c: drive > Windows > System32 folder and save the files again and check if the problem persists.

  To reregister the files follow these steps:

  a. click on the "Start" menu, click on 'run '.

  b. in the "Open" box type " kernel32.dll/regserver", without the quotes and press ENTER.

  c. for ntdll.dll type ""ntdll.dll /regserver ", without the quotes and press ENTER."

  It will be useful.

  Please return to the State of the issue and also let us know if you face any problem of Windows in the future and we will be happy to help you.