How to start the recovery on Equium A60?

Similar Questions

• Re: How to start the recovery from the hidden partition?

  Sorry for my English.

  I reinstalled Windows from DVD Windows (win Vista) because I get blue screen sometimes. After the reinstallation, I had the same problem again.
  Now the shop wants to charge me for the service because recovery F8 does not work. I still have this hidden partition, but I put t know how to do the recovery. Any chance of fixing the problem?

  I don t care about the data and the blue screen, I think than is hardware problem.
  Thank you

  Hello

  Now you have the problem. You can start the recovery folder HDDRecovery facility just if your laptop has the factory settings.
  When you use Microsoft facilities disk for the installation of the operating system, this option will be gone.

  You have created recovery DVD such as recommended by Toshiba?

• Where to find the recovery for Equium A60 CD

  I recently bought a laptop Equium A60 but the seller didn't have the recovery CD or other CD that comes with it.

  Could someone tell me where I can get a copy please?

  Thanks in advance!

  Hello

  I think that it is a question more. And the answer is;

  . Contact the ASP in your country for a new Toshiba Recovery CD.

  By the way; You should first check the forum for a similar question because like I said above; It is a question asked. This has been posted 10,000 times here in the forum ;)

  Good bye

• Re: How to use the recovery on Satellite A60 cd

  Hello, I want to give my a60 to its factory settings. I found my recovery cd but I lost the instruction booklet on how to use the dam thing! I did it before, but for the life of me I don't remember.

  can anyone help?

  Many thanks, Jun

  Hello

  This forum is a large database and provides discussions much useful and views.

  Search you and read a few discussions?

• How to start the recovery of the purchased DVD system

  I have a Pavilion dv6 VA179EA. I ordered a DVD system recovery to get original Vista configurations. When I start the computer, it just says that it cannot install Windows. The DVD of recovery was in place. Can someone help me?

  lets go ahead and check this out

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=37539&tmp_task=solveCategory&CC=US&DLC=en&LC=en&Product=3949656&Query=VA179EA&Tool=

  Good luck

• How to start the recovery on Tecra 8000 CD?

  Hello

  I tried to recover with CD. The manual says hold 'C '. It is not possible to hold 'C' when starting, the beep of the machine and a quick beep.
  What can I do?
  Hope someone has maybe had the same problem
  Thank you

  This with C at startup should work. I just hope that you use the correct CD.
  You have the CD1 and CD2? Make sure that you use CD1 first.

  You can enter the BIOS and put the optical drive as first boot device.

• Equium won't start - how to access the recovery partition?

  Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit, that no longer starts (probably due to damage of rootkit virus). It loads the BIOS but then goes to black screen with blinking cursor.

  F8 does not work.
  F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and a CD-ROM drive are listed in hand and start in the right order.

  Using F12 I can get it to boot from a Win7 64 bit repair disc that I burned using my laptop.

  However, it does not recognize the operating system or any image or restore points (because it is 64-bit) but he will be responsible for command prompt.

  To * guest *, I can launch Notepad and when I click on file / open and double click on computer it shows 4 Hard drives as follows:
  Local disc (c :))
  Data (d :)) 42 GB free of 54.5 GB
  WinRE (e :)) 1.11 GB free of 1.46 GB)
  Boot (x :)) 29.0 MB of free space of 31.5 MB (which is used by the repair disk)

  So the C: drive is listed, but without ability.

  * CHKDSK *.
  CHKDSK c: /r and press return

  «The type of the file system is NTFS.»
  Unable to determine the status and version of the volume. CHKDSK is abandoned.
  Cannot transfer messages saved in the journal of the events with the 50 State.

  * Run TESTDISK *.

  Analysis:
  Size of the partition start end in sectors
  1 P Windows RE (store) 0 32 33 191 89 26 3072000
  2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
  3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)

  * = Primary bootable
  When you perform a quick search, then P - list of files, the second partition it reports:
  "Cannot open the file system. Filesystem seems damaged. »

  So what I want to do is boot to Windows restore to drive E.

  My question is for Toshiba experts: If F8 does not work how to use the recovery partition?

  Laptop is:
  Part number: PSAF5E-002005KS
  Main features
  -Intel® Pentium® Dual-Core Processor T2310
  -Genuine Windows Vista® Home Premium Edition
  -Drive DVD Super Multi (Double Layer)
  -2 048 (1 024 + 1 024) MB of RAM (667 MHz)
  -15.4 "WXGA TFT display 1 280 x 800

  > THIS ISN'T MICROSOFT, TOSHIBA, AND GOOD PRODUCT DESIGN.
  I really put t know that should do better than to place the Microsoft sticker at the bottom.
  This product key and sticker on it's just proof that you purchased the machine with an operating system preinstalled and legal active OS version. This key belongs to original OS (recovery image) that you got with your laptop and it is not a kind of universal key that you can use for the activation of the operating system if you have made the decision to install the clean version of the OS.

  In General, this key is totally useless. While your computer you've got legal copy and this version, that you can install so often desired. It must not be enabled.
  > So my question still remains: can I recover my Toshiba laptop using this restore partition?
  If you want to recover using the Toshiba recovery image response is not. Cannot start HARD drive recovery facility.
  > Even with a dvd of Windows Vista is genuine, I can't reload the OS
  In my opinion you need make the clean OS installation using the clean installation or order original Toshiba Recovery disk on https://backupmedia.toshiba.eu/landing.aspx disc and install original (already active) recovery image.

• Equium L20: How to use the recovery CD if the CD/DVD drive is faulty?

  Hello

  I have an Equium L20 at the mo and unfortunately the CD/DVD drive is damaged and is no longer works (I can't even open the drawer), and I can't start up.

  Of course, I can't start the recovery CD is if there is another solution? I tried to create a bootable USB but I can't make it work, whenever I ask the bios to run it it runs as if it is a hard drive and says "operating system not found '. I reached the end of my train of thought so any help would be much appreciated!

  Thank you

  Tom

  Hi Tom

  You want to use your laptop with defective CD/DVD drive all the time? Why you don't want to trade the player and all your problems will be gone. The drive cannot be expensive and I am sure that you can exchange it only.

• How to start the installation of recovery on Satellite L350-170?

  Hello

  I'm new to this so please be gentle with me! -J' have a Toshiba Satellite L350-170 (Windows Vista SP2). I burned the recovery DVD 2 right after that I got back. I decided to get it back to factory settings, so I put the first recovery disc in the drive and... nothing. It will not automatically play/start to start the recovery process. I can access the files on the drive through "MY COMPUTER" but you can see a 'set-up '. I had already used the discs to recover and it worked then no problem.

  There is nothing wrong with the computer or the error messages

  Apologies if its been said before, but can someone help or I would like to know what is happening please?

  with deep gratitude

  Myke

  Hello Mike

  If it worked in the past that I n t see the reason why it shouldn't still works one time, except the discs are damaged.

  Anyway, try this:
  Start your laptop and press F12 repeatedly to enter the boot menu
  Insert disk 1 into the optical disc drive
  In the list, choose the CD/DVD drive and press ENTER

  ODD must start to read the disc and you should see something on the screen.

  It works for you?

• How to use the recovery CD?

  Hello

  Ive lost the instructions to tell me how to use the recovery CD. I forgot, I need to press to access the disks when I reboot!

  Can anyone help please?
  St. Clare

  Hi clear, before using the recovery CD make you that all important data has been saved to the floppy or USB key because the procedure will erase the entire hard drive. The method for booting from a cΘdΘrom may vary according to the model number of your laptop, but it's something like hold the 'B' button for the Toshiba Startup logo. If this fails you can try to change the boot sequence or use the Toshiba from Windows or the BIOS configuration tool (ESC then F1 when prompted from a cold start) make CD-ROM the first device startup in the list.

  Richard S.

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Satellite A45-S250: how to use the recovery CD if the DVD player does not work

  Hi all
  First of all, apologize for my English, I'm french :)

  So my problem is that I would like to re - install everything on an A45-S250 using the recovery CD.
  But the main problem is that the internal DVD player no longer exists.

  I try plugging in an external DVD drive, but the laptop won't start on it.

  I have seen that it can start with a disk, lan or SD card drive. But with opportunities of theses, how power reinstall everything include in the recovery CD?

  I may have a usb floppy drive, so I'll be able to boot from a bootable disk. but then how to start the process of recovery CD?
  I will prefer to use the recovery as a home standart WinXP CD, because I know that the OEM series will not work in an original version of Windows XP...

  Thanks for your help!

  Kubs

  Hello Kubs

  I see only one solution: you have to somehow use external DVD player and make it visible to your laptop. I try didn t, but I guess you need to start your laptop using WXP startdisc and load the MS-DOS driver for external device.
  If you will have success to access external hard drive I guess that you will be able to start the recovery procedure.

• I need Recovery Manager or start the recovery within Windows

  Stupid boring history:

  I work in a local store of pawn and we also miss a place ebay store. Some people are not the brightest.

  We have a HP Pavilion A6400Z that origionally came with Vista Home Basic.

  Apparently at some point they thought it was too slow, so they took an acer recovery disk and put XP on there. There is no drivers / whatnot.

  I put vista Home premium on there to see how he could play, and it works well. The recovery partition is surprisingly intact, with all of the HP Preload files there.

  What I do:

  Only I have a disk of vista Home premium and want to the factory restore using the recovery partition that is always there.

  Pressing F11 at startup is not in recovery mode, I need to get the software HP Recovery Manager, or find a file on the partition recovery that will do it for me.

  Thank you in advance!

  By pressing F11 on HP Invent blue screen, as soon as it presents, should start the Recovery Manager.  If it isn't, there are two other ways to get it started.

  (1) try to start in Safe Mode, tapping F8 (not now) after the blue HP screen.  Then go on the recovery partition and mark it as active in the "disk management", then restart.  Back in safe mode, and it must ask that the installation of Windows you want.  If it does not order them HERErecovery Kit.  You can see several items that apply but do not require the "Vista Business". 5092-7398 or 5092-7399 should work.

• PC will not boot or start the recovery console

  Windows XP 2004

  AMD Athlon XP 3000 +.

  AVG 8.0

  My friend tried to jailbreak his ipod. Now his PC will not boot the OS. It will go to the screen with the options to choose each time you start upward into the safe, normally last good known etc.. Choose one of these options results when control of the PC for the IDE drives and soon after an accident to return to the screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer." I try to start the recovery console, but then I get a blue screen that gives the same spiel, then this Stop error message:

  STOP: 0X0000007B (0XF79BA524, 0XC0000034, 0X00000000, 0X00000000).

  In addition, I changed the boot order in BIOS and tried to use the recovery through an ISO boot console. He ends up crashing this first screen appeared. Even if the BONE is fatal, these guys really want to the GET data out of their hard drive.

  Thank you.

  http://support.Microsoft.com/kb/316401

  http://support.Microsoft.com/kb/324103

  Or, if you just want to back up your data and do a clean install:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• How to copy the recovery on the new HARD drive partition, HARD drive failed?

  Hallo,

  I have a Compaq Mini netbook with Windows 7 Starter.

  The HARD drive has failed and it is not repairable. However, it seems that the recovery partition is OK.

  I want to buy a new HARD drive, install the driver on the netbook, and then use the tools/recovery partition to install windows 7 on a new PC.

  So, the question is simple: how to copy the recovery for the new HARD drive partition?

  Hello s91066.

  If your hard drive of your laptop doesn't have? If this is the case, what do you mean by the "recovery partition is ok? I doubt that this laptop has two hard disks, so if you are able to see this partition of your hard drive may still work.

  You will need a set of recovery disks to restore the partitions on the new drive. If you can start Windows, which you can probably not with a dead hard drive, you can follow these steps if you can get into Windows.

  If you are unable to boot into Windows, you need a set of disks. You can order it directly from HP. The number of the United States / Canada is 1-800-474-6836. If you are in another domain, you must visit HP's Support around the world to find contact information for your region.

  I hope that is useful; have a great weekend!