How to stop PC if the network is not available until 30 minutes

Similar Questions

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• I'm really hearing in 2008. Now I updraded to windows 10 it did not work, but it worked fine on windows 7 pro, he is asking to activate your server is down and the telefon * is not available. What should do?

  AAudition does not work on windows 10 ask you an activation code. No work is available. I have not been informed that the server should be stopped or that the telservice was not available. Now, I returned to windows 7 pro, but he asks still activationcode I get the err 24:24

  HI Robertg77843012,

  As you know, the activation for Audition 3 or earlier server is no longer available. Adobe has made a special version of CS2 provision affected customers, and he is hearing. The special version can be downloaded and activated by following the instructions contained in this help document: error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3. Please note that you must use the special version with the serial number supplied during installation. Your existing serial number will not work. There is also no guarantee, as the Bani, the old software will work in newer operating systems. However, it is worth a try.

  Let us know how it goes or if you have any other questions.

  Best,

  Del

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  Acrobat Reader DC will not install. It goes about 85% and stops with a message that the file I am trying to achieve is on a network and not available.  Totally frustrated that many files need this program to open.

  I got this program for years.  Update Windows 10 and after nothing more than headaches with he returned to Windows 7 and it is then Acrobat has stopped working.

  Hi lindat7439924,

  There is no uninstall for Mac Reader program. You can directly delete the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Then you can download Adobe reader from here: http://get.adobe.com/reader/enterprise/

  Kind regards

  Meenakshi

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• "the network is not present or started" after the execution of the configuration of the network. Why?

  I have a laptop that I used it on a network of small business with printers shared running a Microsoft network.   I was able to see the hard drives, printers, files and folders on the other machines for the past year, without problem.

  I recently installed Norton Internet Security Suite and since this operation were not able to connect to the local network< but="" i="" have="" full="" internet="" access. ="" i="" can="" see="" the="" router="" and="" surf="" the="">

  When I click on the already mapped network Drives (Y and Z on my computer) I get the following popup error:

  An error occurred while reconnecting Z: to \\servername\mydirectory

  Microsoft Windows Network: The network is not present or started.

  This connection has not been restored.

  So I tried to debug as follows.

  I called Norton.  They compeltely uninstalled after internet security and reinstalled using smart firewall.
  (It does not)
   
  I disabled Norton and tried to update the drive netowrk / reconnection
  (It does not)

  I disabled Norton and represented the Network Setup Wizard. Rebooted, tried to reconnect
  (Which did not).

  whenever I tried to connect, the error message.

  If the Windows network turned then how can I access the network?

  I don't see all the computers on the network.
  I can not connect to the printer, I was connected previously.
  The drive mappings, I set up back same Netowrk not started error when I click on them.
  There is no other computers on my network
  I have the same workgroup name (MSHOME) as other computers that CAN share resources.

  I use a Compaq Presario M2000 laptop
  Running Windows XP Home Edition (SP 3)
  trying to connect to a Waindows XP Home w / shared desktop printer.

  Thoughts, suggestions?

  Found the answer

  A friend who did the same thing.

  Notes: Microsoft Windows Network: the network is not present or not started

  
  "I started to see this message on a Windows XP SP2 computer, but not on the other in the same room. I couldn't understand why it was happening I was watching the Samba server to connect, and the machine was not connect at all. In addition, this specific message was not really on the Web.

  The answer is quite simple - run services.msc and enable the Workstation . I had turned off, rebooted and forgotten on this subject. »

  found the answer here:
  http://perljam.NET/notes/Microsoft-Windows-network-the-network-is-not-present-or-not-started/

  DOH

  My apologies.  I'm REALLY surprised that I couldn't find the answer on the forum to help here.  But now, it's here.  Hope this helps someone else who has the same problem and cannot find the solution.

• I get an error, "Microsoft Hosted network is not available" when I try to connect wifi for my HTC desire V through the laptop.

  I use dell xps 15 laptop in which I use Wired internet.
  I want to use my computer laptop wi - fi as a hotspot to use internet on my HTC Desire V for this I'm using connectify software but when I start HotSpot Wi - FI Access Point Encrypted (WPA2) method of sharing is for me the hosted Microsoft network is not available.

  Original title: Microsoft Hosted network is not available

  I had the same problem and that's what I did on my PC Win7:

  (Forgive me if my English is not good)

  1. verification of my network hosted in my driver. I have run the administrator command prompt and type netsh wlan start hostednetwork

  If you get this message:

  The hosted network could not be started. The group or resource is not in the correct state to perform the requested operation.

  
  

  Then you have the same problem with me. It is the next step.

  2. check my driver. Type of command line: netsh wlan show pilot

  Then I saw that my support pilot hosted network. If your driver does not support hosted network, I suggest update you your driver or reinstall it.

  How FND out your driver and update: Start - Control Panel - system and safety - device (under System) Manager - ECS

  
  

  3. If your drivers support hosted network but still will not start, then the problem could be that you do not have Microsoft Virtual WiFi Miniport Adapter (the same problem happened to me). You can search and download. I tried and installed the new card.

  Now I have Microsoft Virtual WiFi Miniport Adapter under network cards, in Device Manager.

  4. I tried step 1 and it worked! So I can run my Connectify and this error message never showed even once.

  I hope this works for you also.

  Good luck

• Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power Home). The phone is new (5 days). It's a m

  Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).

  The phone is new (5 days). It's a wedding?

  If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.

  Restore your device from an iCloud or iTunes backup - Apple Support

  Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• I'm unable to open one of my 'recent documents' document. It is said to make sure that the network resource is available.

  Original title: "Recent Documents".

  I'm unable to open one of my 'recent documents' document.  It is said to make sure that the network resource is available.  What does that mean?  And I can't find the document in "My Documents" is.  And I tried a search.

  Hello

  The error means either that the document no longer is located in the folder it was when it was finally opened or the location that the file was initially located in is no longer in the same place.

  Example 1: I open a document in the My Documents folder, then after closing the document, I moved manually the file to the desktop.

  Example2: I open a document located on a removable hard drive. After the closure of the paper, I then disconnect the removable hard drive of the PC.

  In these two examples, Windows would be able to find the Document using the "Recent Documents" list

  Step 1: I recommend that you check the trash or see if the document is located on a removable hard drive (or USB key) that is is more attached to the computer.

  Step 2: Use recovery software of the third party to recover the document.
   
  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Error 1222: The network is not present or not started

  I have a home network with two computers. I've implemented such that file, internet and printer shares, a set-up that has worked well for a while. All of a sudden, I could not access the computer on which the printer is connected to everything. This computer, however, was still able to access the internet, but not able to access its own location on the computer network. I ran the Diagnostics of the network and the convenience of homegroup without result. I discovered that the Server service is not running and tried to start, but rather, I got the error "Windows could not start the Server service on Local computer. Error 1222: the network is not present or not started. "LAN diagnostics donnГ not answers. After the Server service does not, I cannot share files or printer, but can somehow get internet to share.

  Help, please. Thank you

  Hello

  Maybe this can help, http://support.microsoft.com/kb/170336

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 'the settings saved on this computer for the network do not match the requirements of the network.

  original title: securtity settings in my computers. where should I go and see what are my security settings?

  the settings saved on this computer for the network do not match the requirements of the network.

  where should I go and see the settings?

  Hello Arturito1,

  Thanks for posting in the Microsoft Answers forum! For assistance with your question, I would recommend that you follow the steps provided by Srinivas R in the thread below:

  http://social.answers.Microsoft.com/forums/en/vistanetworking/thread/a82432f2-9312-480A-b2ea-720033c73387

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.