How to switch rendering engines?

Similar Questions

• I'm trying to get a playback loop by using the multimedia rendering engine

  As part of the MP3 standard, there is a gap of millisecond 20 at the beginning of each file.

  so when I have an MP3 in a loop there is a sudden gap when the queue restarts.

  So my question is... Is there a way to tell the media rendering engine a loop between two points in time.

  This way I can order the system to loop from 20 ms at the end.

  Interesting on iOS, it ignores that initials 20 incomplete milliseconds and work very well.

  (I chose to use an mp3 file as it is 4 times smaller than a wav file and is currently at 1 MB)

  I could probably use an OGG format, but I have not seen all documentation saying that this is actually supported.

  I found this link

  http://www.GameDev.NET/page/resources/_/technical/game-programming/introduction-to-Ogg-Vorbis-r2031

  explains how to load with OpenAL ogg files

  I have openAl race (wish I found this link earlier)

  Thanks for everybodies help

• Plotted in 3D rendering engine Department. Still images rendered in animatons.

  Hello!

  I would like to ask the pros how can I optimize the rendering of animations process?

  I have a publication with text extruded with 3D engine layer traced to the RADIUS. There is an intro (text) and outro (text disappears). Between the intro and outro are just still frames, without any movement. When I go, I see how after the intro of rendering, each still image unique rerenders again and again. It is increases rendering time significantly, why it is happening? How can I optimize the rendering process? Is it possible for AE render a single image still animation, produce this next image is the same and jump rerender, continue to render fragments of an animation at the end next?  Maybe there's a cache or something else that needs to be enabled?

  The AE version is CC 2015.3 (13.8.1.38)

  Mac OS X 10.11.6 (15 G 31)

  24 GB RAM

  3.2 GHz Intel Core i5

  CUDA driver version: 7.5.30

  Thank you!

  3D Raytrace rendering engine uses a brute force method and makes each image. Your only option would be to pre-rendered sequences of images and use them.

  Mylenium

• Error of the rendering engine

  My ae_render_only_node.txt file is active on the positions of rendering engine. However, I get this error message in the render farm:

  > > > after Effects error: < < < could not get a license. Run the complete application to correct the problem or get a more detailed message.

  Adobe told me that I need not allow the workstation of rendering engine in order to make the machine.

  I am able to open the rendering engine outside the farm of rendering with no problems.

  Any suggestions as to what is causing error in the render farm? I use Smedge as my firm rendering application.

  My assessment is that renderers nodes fail to launch because of this error, but the error of license they are back is somewhat misleading (failure occurs before the licensing of completed audit, that's why reporting that the license check failed, even if this isn't the cause of the problem).

  The only trace I can find that carries specific error on you try to run a script file in After Effects via an AppleScript "DoScript" call. I have my doubts it's what you do (especially since you're on Windows), but the text of the error indicates that a script is called and it is unable to assess. So, questions:

  -You have scripts in the Scripts/startup folder? Remove them affect the problem?

  -Are there a difference in how Smedge called machines problem and those who only reports the error? Is there a different set of variables, or a different path, etc. ?

  I'm not familiar with how Smedge calls After Effects to run it. (I assume that the execution of a command line). If you are able to launch successfully the outside Smedge rendering engine, you can contact them for more information on this track.

• "GPU acceleration plotted in 3D rendering engine Department doesn't have enough free video memory"

  I just updated my AE 12.1 and it fixed the problem of crash on OSX 10.9 perfectly. But everytime I open the software it shows: "GPU acceleration plotted in 3D rendering engine Department doesn't have enough video memory (VRAM) to open source. The converter uses the CPU. To allow the traced the beam 3D rendering engine to use the GPU, close other applications and restart After Effects. "It never occurred before (even when it is still 12.0.1 on Mavericks) and nothing has changed after the Mac is restarted. I installed the latest version of CUDA (5.5.28) and my device is 15.4 "Macbook pro with the retina (16G of RAM, 512 G SSD and Nvida GTX 650 M)

  Thank you very much

  update after effects CC (12.2) and After Effects CS6 (11.0.4) updated include corrections and OptiX library for rendering 3D traced to the RADIUS changes that make VRAM handles better, prevent accidents and improve the experience in this area.

  Let us know how it works for you after you install updates.

• What is the rendering engine used for the window of "Design"?

  Hello, I was wondering what is the engine used in the Design tab?  Also, can someone explain why I get two completely different from my Web page rendering when I switch to the mode live view? I don't talk a small change here, Im talking about my div will be perfectly aligned when using live view, but when im not they are all jumbled up, on top of the other and some on a distance where he was a foot.  I ask these questions because I spend with my CSS then I check the page in some browsers, it looks real smooth and not really difference between Firefox, Chrome, Internet Explorer 8, and Safari. But Opera and IE6 and 7 all rendered looks jumbled up, stacked and moved as when I'm not 'live view' mode in dreamweaver. It's just my divs that give me problems in these browsers, and when im not in live view mode in dreamweaver.

  9.11_Truth wrote:

  Hello, I was wondering what is the engine used in the Design tab?  Also, can someone explain why I get two completely different from my Web page rendering when I switch to the mode live view? I don't talk a small change here, Im talking about my div will be perfectly aligned when using live view, but when im not they are all jumbled up, on top of the other and some on a distance where he was a foot.  I ask these questions because I spend with my CSS then I check the page in some browsers, it looks real smooth and not really difference between Firefox, Chrome, Internet Explorer 8, and Safari. But Opera and IE6 and 7 all rendered looks jumbled up, stacked and moved as when I'm not 'live view' mode in dreamweaver. It's just my divs that give me problems in these browsers, and when im not in live view mode in dreamweaver.

  Design view has never really had a rendering engine.  Is to guess the code, more of a literal read in quirks mode.  The Live View mode is rendered using the Webkit engine in Chrome and Safari and can replicate with some degree of accuracy of the display that you would expect in these browsers.

  Only way to tell the differences would be to see your code.  But I will suggest first run your page through the validator and repair to the top of all the errors that may exist:

  http://validator.w3.org/Unicorn/

• How to switch to safari 9.1 without internet connection

  I've recently upgraded to El Capitan on my 2009 mac. Fine, except that now, I find my version of safari (6.6) is not compatible with El Capitan and I have no internet connection. How to switch to safari 9.1 without being able to download it? Can I get a disk with on or something?

  Safari is upgraded when you upgrade your system. There is no installer for stand-alone for Safari. If you run El Capitan your Safari should be version 9.1.2. Otherwise apply the OS X Combo Update 10.11.6.

  The Combo update is a complete installation, as opposed to an incremental "delta" update, so you have to overwrite all files are damaged or missing. It does not matter if you have previously applied. All your data and settings must be kept, but that said, you should always have a backup.

  https://support.Apple.com/downloads/MacOS

• How to manage search engines in Firefox Beta for Android

  When I type a search in the search bar, I get a list of search engines to use options:

  Google
  Amazon
  Twitter
  Wikipedia

  I would use google.co.uk not google.com (and probably amazon.co.uk and not amazon.com) but may not know how to manage search engines.

  Could someone let me know if this is possible

  see you soon,

  Malcolm.

  You can add new http://mycroft.mozdev.org/ research search engines

  To the best of my knowledge, it is not possible to remove search engines.

• Why the firefox rendering engine go berzerk and display garbage?

  As I scroll or I go to a new page, more at any time, the display in the window of Firefox becomes badly displayed. It is pehaps diagonally across the window or perhaps a sub display field appears distorted diagonally. I could send a screenshot. It happened a bit when you use Thunderbird, which I understand has the same rendering engine but not lately. If I close Firefox and start it again, it might behave for a while. He quickly began having problems again. Right now, as I type this, this pane for entering text flashes on and outside, and it has now begun to go diagonal to its display. At the same time, I continue to type text. Is it possible to send some screenshots? As I type this and then to the bottom of the page, try to copy and past the information requested below in case of problem, I had a lot of trouble with the screen turning autour. Finally, I noticed the link to copy all to the Clipboard to paste below. I can't tell you if he did because I can't get the window below to display correctly.

  Instead of boot mode safe, you can try to turn off the use hardware acceleration where possible of Tools (Alt + T) > Options > Advanced > general and restart Firefox normally.

  You can also take a screenshot using the PrtSc / SysRq key on the keyboard. This takes a picture of the whole desktop, copy the memory/Clipboard and you can paste it in any graphics program, save it and download it. To take a just active window press Alt and the key above together.

• How to switch to Firefox 7 after installing Firefox 8?

  IAM having problems with access to ancestry.com.au since I installed Firefox 8. I checked with the ancestors, and they said that they are not configured to work with Firefox 8. They work well with Firefox 7. How to switch to Firefox 7. I'm very tired of having to enter all the ID and password everywhere wherever I'm going while navigation or go to my accounts. I'm too frustrated to continue with Firefox 8. Please give me simple instructions on how to return to Firefox 7.

  You can get Firefox here 7

  • http://releases.mozilla.org/pub/mozilla.org/firefox/releases/7.0.1/Win32/en-US/Firefox%20Setup%207.0.1.exe

• How to switch between Intel and ATI GPU on Satellite L50 - B

  Hello

  I bought a L50 - B - 1LR PSKTAE Satellite.
  Is there a graphics card Intel on the motherboard, but also a second for better 3D AMD Radeon.
  Now, I plugged on a second screen on the HDMI output, but still using the Intel graphics card.
  How can I change this?

  I made a button in the radeon software which says that when I start the sketchup program that he would take the graphics card from AMD. But it's still the Intel graphics adapter.

  Thank you

  Bart Slosse

  {quote} How can I change this? {quote}

  You can configure the unique application of each graphics chip.
  Please check this thread how to switch to external ATI GPU
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=78781

  Some nice youtube videos also show detailed step by step instructions how to:
  https://www.YouTube.com/watch?v=DCh9Eob0mNY

• How to switch on and Switch Off LED using lab view

  How to switch on and Switch Off LED using lab view, I need to Switch on and off material LED, not the soft LED.

  I need to know the different ways to Switch On and Off the LED

  Hello

  I need to control the LED on my laptop which is to have labview, kindly tell the different ways that my laptop a serial port, is possible to control using that.

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• How to switch to Hotmail which is 10 x faster?

  How to switch to Hotmail which is 10 x faster?

  Go to Outlook and use it. You can transfer you Hotmail to the new site.

• How to switch my Acer Aspire One ZG5 model of Win XP to W7?

  How to switch my Acer Aspire One ZG5 model (model 2008) from Win XP to W7?

  I have 1.5 GB of RAM and 160 GB HD. What version of W7 can agree?

  You will appreciate any help/advice - thanks.

  It is clear looking for throough this forum helps a lot of people - there are several questions that no one has offered any sort of a response/answer - it seems hardly useful.

  In any case, I answered my own question: I just connected a USB DVD drive and ran the drive of W7 patch and everything was fine. He did take a lot of time for all updates to load, but there is no real problems. W7 works very well with 1.5 GB of memory.

  Good day!