I'm trying to get a playback loop by using the multimedia rendering engine
As part of the MP3 standard, there is a gap of millisecond 20 at the beginning of each file.
so when I have an MP3 in a loop there is a sudden gap when the queue restarts.
So my question is... Is there a way to tell the media rendering engine a loop between two points in time.
This way I can order the system to loop from 20 ms at the end.
Interesting on iOS, it ignores that initials 20 incomplete milliseconds and work very well.
(I chose to use an mp3 file as it is 4 times smaller than a wav file and is currently at 1 MB)
I could probably use an OGG format, but I have not seen all documentation saying that this is actually supported.
I found this link
http://www.GameDev.NET/page/resources/_/technical/game-programming/introduction-to-Ogg-Vorbis-r2031
explains how to load with OpenAL ogg files
I have openAl race (wish I found this link earlier)
Thanks for everybodies help
Tags: BlackBerry Developers
Similar Questions
-
I'm trying to get my computer to communicate with the printer so it iis 'tail' documents.
I'm trying to get my computer to communicate with the printer - for the moment that it is 'Queue' documents.
What should I do to get the printer to work?
Hello
1. What is the brand and model of your printer?
2. how you have connected the printer?Download and run the tool Fixit of the article mentioned below and check if this solves the problem.
Problems printing and printing errors:
http://support.Microsoft.com/GP/printing_problemsKind regards
Afzal Taher - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: multiple monitors
I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?
Hi David,
Thanks for posting your query on the Microsoft Community.
I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.
Check out the link:
http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1
You can also check:
http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I'm trying to update CS 6Illustrator tool by using the update but I always get an error saying "updates could not be applied." How can this be?
Here is my log file:
Update Adobe Illustrator CS6 (version 16.2.1)
Failed installation. Error code: U44M1P7
If you are using a mac: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html
-
a stop time loop by using the time difference of two counts of ticks
Hi guys,.
I'm writing currently a code test how much time does it take for a formula node perform its operation. The program uses some time to perform the calculation in a loop, and the program stops after having calculated when the number of cycles reached 10 seconds. The program then displays the number of iterations, he does it in 10 seconds.
If at the beginning, I created 2 images of the structure of the sequence. In my first image, I have my original number, and as part of my second, I have my final number of cycles and the while loop. I used the subtraction function and divide the result by 1000 to get jet lag. Then using the comparison function, I put if output > 10 then the program must stop, to do this, I've linked out of the comparison function to the button stop inside the while loop.
However, when I tried to run the code, the program just didn't run. That's why I created a similar program that puts the final number of cycles in the new image sequence. When I ran this code, the program never stopped.
Guys do you have any idea what was wrong with my codes.
Thank you!
Erry
Stream!
In the two VI the Terminal stop of the while loop is controlled by a Boolean value whose source is outside of the while loop. If this loop will be executed once, or forever, depending on the value of the Boolean value which is calculated before the loop starts and comes to the tunnel through the loop.
I recommend you watch the LabVIEW tutorials online
LabVIEW Introduction course - 3 hours
LabVIEW Introduction course - 6 hours -
Need help for the conversion of the nested loops to use the stream
I'm trying to teach me how to effectively use the java stream, but finds it difficult to find the correct syntax for a problem of nested loop. I would like to convert the following code to use the Java 8 stream instead of nested loops. Can anyone provide an example or a solution?
/** * Return all members of stringListOne that begin with any of the strings in * stringListTwo * * @return all members of stringListOne that begin with any of the strings in * stringListTwo */ Set<String> getFilteredStrings(Set<String> stringListOne, Set<String> stringListTwo) { Set<String> stringListOneFiltered = new HashSet<String>(); for (String next : stringListOne) { for (String nextPrefix : stringListTwo) { if (next.startsWith(nextPrefix)) { stringListOneFiltered.add(next); } } } return stringListOneFiltered; }
Here's a test case for the above code:
/** * Test method for {@link scratchpad.MyClass#getFilteredStrings(java.util.Set, java.util.Set)}. */ @Test public final void testGetFilteredStrings() { MyClass uut = new MyClass(); Set<String> stringListOne = new HashSet<String>(); stringListOne.add("until"); stringListOne.add("unite"); stringListOne.add("under"); stringListOne.add("prepare"); stringListOne.add("pretend"); stringListOne.add("prefix"); stringListOne.add("prepend"); stringListOne.add("post"); stringListOne.add("positive"); stringListOne.add("postgame"); stringListOne.add("postpone"); Set<String> stringListTwo = new HashSet<String>(); stringListTwo.add("post"); stringListTwo.add("pre"); stringListTwo.add("und"); Set<String> result= uut.getFilteredStrings(stringListOne, stringListTwo); System.out.println(result); assertEquals(8, result.size()); }
Thanks for any help you can provide! I get the hang of using the course of water, but this particular code was difficult.
tmbc
I found the following solution to my question:
GetFilteredStrings (Set stringListOne, the value {Set
stringListTwo) Predicate startsWith
= p-> stringListTwo.stream () .anyMatch (prefix-> p.startsWith (prefix)); Return stringListOne.stream () .filter (startsWith) .collect (Collectors.toSet ());
}
-
Original title: help for Camfrog
When I try to sign on to camfrog I get a message: "you are using the version of Camfrog is obsolete and is no longer supported." Download the latest version of http://download.camfrog.com'-I tried to download but it doesn't work. " 2 questions: do I have to remove the camfrog version I first, and what version download because it says no and 2nd question is that I have camfrog pro - how can I get camfrog pro to get on the new version, because I've already paid for this? Thank you
Hello
These are not the questions we can answer?
You will need to contact the developer of this program.
Camfrog - Help:
http://www.Camfrog.com/help.phtmlCamfrog - Forum:
http://www.Camfrog.com/forum.phtmlConcerning
-
All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!
Trash this stage and re - register. It could be that new file dialog tries to assign a document profile that is damaged or is no longer present on your system. If this does not work, reset the Photoshop preferences. Press ctrl + alt + shift at the launch, confirm with the dialog box that appears if you did it correctly.
Make sure to save all your other actions, brushes and so on first!
Shares usually work between different versions, but if certain parameters have changed they may fail right there.
-
Why I get this message when you use the magnetic lasso tool: "WARNING: no pixel is selected to more than 50 percent." The edges of the selection will be not visible. ?
See here:
-
The printer connects to the same router through the wired port but will not get a valid address using the wireless. The IP is 169.254.140.246 in the wireless network test report, although everything is named PASS
I changed from WEP to WPA and now everything works. Now, to spend a few hours by changing everything in the House.
-
I had my laptop crash and forcing me to reinstall windows and lost all my data, I'm trying to reinstall Adobe acrobat Pro XI. I've been using the serial number on the record is an incorrect serial number,.
Hi Antonio,.
I have checked your account details & found that Acrobat Pro XI was an upgrade of the Acrobat X Pro version.
Now while activating XI Acrobat pro, you must enter the key to series of Acrobat X pro also.
Please make the right choice is to say choose your version of Acrobat earlier & enter the key of this version in order to activate successfully XI Acrobat pro.
You can find the key of your previous Acrobat version using this link find your serial number.
Let me know if you have any further questions.
Kind regards
Nicos -
Write to the file of measurement with a loop For using the value of the dynamic data attributes
I looked and looked, but couldn't find a solution for this.
I currently have 15 points of different data that I try to write in an Excel file. I have all combined in a table and lie with the function "write into a file position. However, the column names are always "Untitled", "Untitled 1" etc. I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes. It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.
I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '. The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:
The source type is dynamic data table 1 d. The type of sink is Dynamic Data.
How can I fix it? I have attached a picture of my installation; Sorry if this is gross (I'm new on this!). Thank you!
It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.
-
Hi, I am trying to download my Blurb photo book and it does not work. I use Lightroom4 and recently (and successfully) use the same picture in several other books. I get an error message that says that the photo cannot be returned. I don't know if it would work with the rest of the photos, because the one who gets the error message is only the third of about 40 images. I would appreciate all the advice really.
Thank you
Carly
As I said, I'm never comfortable with special characters like slash, and colon (exception is the underscore), although I have no direct evidence that there is a problem.
What happens if you rename the photo (using your operating system) to be lake_clouds2.jpg, and then she would have the question mark in LR 4 and you reconnect to the it in LR 4? Renders the picture then?
-
Why do I get "Message Agent wants to use Keychain 'login' and how to stop it and 7 other bunch of connection points most every time I login?
Hey Roman man,
I understand that you see a prompt for your login keychain. I can't anymore how do I fix this.
Now if you have recently changed your password for your Mac, then the password for your keychain will need to be updated. You can make this change in the Keychain Access application. If you do not know the password, then you need to reset the password in the keychain. Take a look at the article below for specific details get this sorted out.
If your Mac keeps asking for the password in the keychain
https://support.Apple.com/en-us/HT201609Take it easy
-
XP is stuck in a reboot loop, cannot use the option to repair with the XP installation CD
have you tried disturbances on xp installation cd gives just exit and restart option
* original title - xp keeps rebooting after screen with xp color logo *.
I had not so long ago. You can start your PC in safe mode using the F8 key on startup? So then start in safe mode go to your add/remove software in the control panel and delete all of your drivers. Mine was a the driver conflict. Once I removed all my drivers, the system starts fine and then reinstalled the appropriate drivers based on DLLs installed previously.
Maybe you are looking for
-
get a message that firefox is outdated, but when you try to update the download is the same version on mac os. The version is 34.0.5. As soon as I run the brwswer, I get the update message.
-
Should I have a sufficient qualification to work for Microsoft?
Hello, sorry to take your time. My name is Mohsen Kashfi, I am 21 years old. I studied postgraduate studies at the University of Shiraz, which lies in the South of the Iran. I IETLS certification with 6 academic degree, also I have certified in MCSE,
-
Z1: issues installing Windows 10 on Z1
Trying to update my Z1 (G1) to 10 Windows with a clean install. I tried to follow the steps described in the following article: HP - upgrade to Windows 10 workstations; However, all attempts make changes in BIOS in "Steps to take before upgrading" h
-
Is it possible to automatically send emails from a specific sender to the junk mail folder?
move to junk, but not to block the sender is it possible to automatically send emails from a specific sender to the junk mail folder? I don't want to block.
-
Missing files in the document library
Hello! So I got a few files in the folder my documents. I have them accidentally deleted/removed from the library and the library folder, so that the files are missing. Is there a possibility that I could get back them? Thank you!