How to take out the battery?

Similar Questions

• should I take out the battery when the laptop is plugged in

  Hello everyone, starting here. I have a question about my hp dv7-4274nr laptop... I said, when you use the computer should I take out the battery when it is plugged in to the 110 (ankle) is this true?

  Thanks Mike

  No, the only reason would be if you use the laptop on the sector for a long time, like a month or more, then drain the battery in 30-40%, and remove, store in a cool place.

• How can I remove the battery? Can not find the "door"!

  I'm looking at the t-shirt and I can't get the battery door to open. My phone is non-repsonsive. ICAN can't turn it on and covered troubleshooting said remove the battery and put it back in. I can't figure out how to open this device and take out the battery. Thepictire is not useful at all.

  To remove the battery cover, the best thing to do is to try to put your fingernail between the cover and the screen on top (I usually do it between the fingerprint reader and the corner of the phone). Once you get a loose corner, it is easy to remove the rest of the cover.

• Satellite P15 - if the plug comes out, the battery stops charging

  My Toshiba is rather annoying. I hope there is a solution to this and it is not integrated in the computer by braindead materials developers.

  My battery is toast. For a long time. I find the computer works very well if the power cable is in. If she comes out, the battery has usually about a minute and a half of her life. However, what makes me shit off the coast, it is that the battery does not load again. He will sit and drain his power to zero, even with cable connected sector, if the plug is disconnected even for a millisecond. The only way to load it again, is to shut off the computer and start upward.

  What the hell?

  Hi floydien,

  Wow, Satellite P15 is really an oldie.

  I m not an expert, but to me this looks like a battery or motherboard problem. A battery can be recharged about 500 times and after that it will lose a lot of power. This means that you can work a few minutes only on battery mode.

  In your case, I'll try a new battery. If it doesn t work I think you need a new mainboard.
  Also take a look on eBay. There you can get second hand cheap parts sometimes.

• How to get out the mode safe mode with msconfig.

  I'm working on my computer and need to start in safe mode. I ran the msconfig and reboot the laptop. I get to the login screen, but when I get my username and password it tells me that the user name and password is not correct. How to get out the mode safe mode with msconfig.

  When you run msconfig to get set to Safe Mode, you just activate/check the option/SafeBoot at startup. INI tab or did you do something else?

  There is some malware that if you use the/SafeBoot option, you will not be able to use your system again until you remove the switch/SafeBoot the boot.ini for you can boot normally.

  Maybe it's not your exact problem, but I will never suggest to anyone to use the option / SafeBoot never again - too risky when troubleshooting since you can always start new or will never connect again until you remove the switch/SafeBoot.

  Anywho, if that's what you have done, you can start in the XP Recovery Console and then either make a new boot.ini file containing the switch/SafeBoot or simply rename the boot.ini file, you have something like boot.ini.old if you don't have a boot.ini file (I know it seems like a weird idea).

  In a single partition configuration, XP is not even a file boot.ini to boot.  XP will complain if there is no boot.ini file, but will always start very well without one (non-believers - try it!).

  After you get booted up and logged in, you can rename boot.ini.old in boot.ini and run msconfig to remove the option/SafeBoot, and never use it again.

• modem to connect to internet wireless, terminated cannot reconnect again after that kid out the battery

  my USB wireless modem and my 3G iphone internet tethering don't seem to be able to connect with my Toshiba Satellite Windows Vista after my son took out the battery during a game, when the game froze. wireless modem and the iphone 3G still works on the othe netbook windows 98. I wonder why? no settings have been changed, but the subscription wireless displays connection completed on the toshiba. modem has been reinstalled and still showed complete connection. Please advise, thks

  Hi lyndonalive,

  You are able to use any other USB device on your computer?

  You try to run the laptop power cycle. Subsequently, check if you are able to use the USB modem on your computer.

  a. disconnect all external devices from the laptop.

  b. remove the battery from the laptop.

  c. press the power button of the laptop for 10-15 seconds.

  d. Insert the battery in the laptop and restart the computer.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• don't know how to find out the server for my email information.

  I had to reinstall Windows Vista (my computer was a mess), and now I don't know how to get information on the mail server

  I don't know how to find out the server information I need

  to set up my email again.

  Also, my pictures 'lost' since I have done this?

  Hello

  Contact your ISP (Internet Service Provider); They provide your broadband / dial connection.

  Ask them to:

  1. your username with them

  2. your password with them.

  3 incoming mail POP3 server.

  4. the outgoing mail SMTP server

  All the settings that you need to come from them, not Microsoft; and they are usually happy to help you set up your e-mail program.

  You can use this guide to set up Windows Mail, too:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  A relocation normally wipes the hard clean everything, as part of the resettlement process.

  Two things you can try:

  1. find a windows.old folder (depends how you reinstalled Vista)

  "How to restore your personal files after performing an installation of Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/932912

  2. This program has had good results in data recovery in circumstances similar to yours.

  http://www.Piriform.com/Recuva

  See you soon.

• How can I change the battery in my wireless mouse

  How can I change the battery in my wireless mouse

  Hello

  http://www.ehow.com/how_5138670_change-wireless-mouse-battery.html

• BlackBerry Z10 how to check that the battery is 100% charged for Blackberry Z10

  Hi, how do I know how much percentage does the battery get charged for BB Z10 mobile.

  Your battery gauge is usually a pretty good indication of what your battery level currently is.  If you want to see expressed as a number instead, drag down and follow the settings > on.  Make sure that the category is set to hardware and look for.  You can also get a lot of apps free battery in BlackBerry World, which shows the level of your battery.

  I hope that helps you.

• How to fill out the customer type when you submit a form?

  How to fill out the customer type when you submit a form?

  You can't do right now in British Colombia by means of forms.

• How to fill out the "to:" line with a variable email address?

  I'm new to coding and am not sure how to ask my question. I have a link in an 'Email' symbol that I would like to have the window open to a 'mailto', but there are several instances of that symbol on the timeline, each using a different email address. If the [symbol]. Email.Click code reads as follows:

  Window.Open ('mailto:'+ sym.getVariable = ("emailWindow"), "_self")

  and the line in the Stage.creationComplete code that is supposed to call the variable code reads:

  sym.getSymbol("Details_David").$("Email").html ("[email protected]" "").setVariable("emailWindow","[email protected]");

  With this code, the browser opens a window of mailto, but the ' to: ' line readings, "indefinite".

  Either in the [symbol]. Email code. Click, I have:

  Window.Open('mailto:"emailWindow"',"_self")

  without the "emailWindow" as the variable name, the "to:" line to the mailto line reads, "emailWindow".

  How to fill out the "to:" line with a variable email address?

  Otherwise, it works better:

  1)

  replace

  sym.getSymbol("Details_David").$("Email").html ("[email protected]").setVariable("emailWindow", "mailto:[email protected]");

  with

  sym.getSymbol("Details_David").$("Email").html ("[email protected]");

• BlackBerry smartphones when I try to play music on my blackberry curve it is said "media is not available" I don't know what that means... How can I do without taking out the battery?

  Help please

  'Busy media' maybe, maybe your drive innitializing the selected track ready to play. It hangs on media busy for a long time?

  Strange behavior like this can be corrected with a reboot. Take the battery out while your device is still lights up. Wait 20 seconds or two, then re-inster your battery. Wait reset through (about 5 minutes). See if that helps. If this isn't the case, sorry, can't help still. A reboot solves a lot of problems.

• How to ensure that the battery has a long service life?

  Hello!
  I just bought a Toshiba Satellite A80 and I was wondering how can I make sure that my battery will have a long life. It is said that the battery is achieved if it is fully charged, and used the laptop to power grid. Does this mean that I have to take my battery while I'm doing this?
  Thanks for your help!

  [Edited by: admin August 6 05 14:46]

  Hey Niji

  If you need some useful information on the battery and the other parts of your unit, you can visit the site Web of Toshiba.
  I found this site:

  http://EU.computers.Toshiba-Europe.com

  Please go to support & download, then the Knowledge Base.
  This site is very good.

  Good bye

• HP Pavilion dv6-T119TX battery error internal 601. How can I change the battery.

  my lap top girls (a little more than 12 months) she uses for United is setting up the 601 battery error message internal needs changing.

  How can I change, I assume it is the small 2032 battery that keeps the clock etc?

  Is there something special you need to do? You just pop and pop out a new one in and turn it on?

  I got a woolies lithium battery is the same manufacturer just different type is this correct?

  You got it as a flashlight. Remove the old and put in new. I say to have the laptop powered is to ensure that no parameters are lost once you remove the battery (CMOS) internal. I did it myself and never had a problem.

• How can I check the battery on 4S?

  I have an old iPhone 4S.  Lately, it seems the need to run down like its drain more, but little or no running applications.  I have try to disable wifi not at home so that it tries to connect to those that I can't use.  But the battery I don't know maybe just petering.  How can I check to see how healthy is it?  I'm in iOS 9.3.5.  I'm not running the location Services for ex.  But ask how can I see how many times he's been charged, or there at - it a good free or paid software that will tell me his health?  Sounds to the purchase of new phone 5 or higher at some point, but cannot yet.

  Try the 'Autonomy' application or make an appointment at the Genius Bar at your local Apple store. They will test the battery for you.