How to throw FCPx with a different fcpbundle?

Similar Questions

• How to plot graphs with a different number of values

  Hello guys,.

  After a few hours, I have to give up and you ask for help.

  The problem:

  It must be possible to disregard some of the measured values. The measure and valid points should appear in the same graph (for example, the measured values of 'x' and valideded 'o' data. Valideded data would look like a circle with an 'x' in the middle).

  So far so good.

  The time difference between the measured data (dbl-table) is always the same (20-30 seconds).

  I tried (see attachment):

  If the measured value is not valid, I delete this value and change in this case the 'dt' in the waveform (see loop 2), if I get the data I want.

  I tried different ways, but I can't to plot the data in a single chart (I think because the timedifference 'dt' is not the same)

  You have an idea, how can I draw the graphs shown in 'graphic linear adjustment' and 'validated card data' in the same chart?

  Maybe I need to use the "graph" and not "table"?

  I chose graphic because it must be possible to hide/show each plot (but me, I'd work with graph as well)

  I hope I described the problem well and you can help me. I'm sure, it's possible and probably easy, but I'm not

  Thank you!!

  Hi Alex,

  do the old trick of NaN - !

• How to make purchases in the apps I bought with a different ID to Apple?

  Here's the scenario:

  So Minecraft EP finally added texture packs, for the new Minecraft PE 15.0

  The only problem is, it costs money.

  Now, I'm happy to pay, but every time I try to pay it tells me "this application has been purchased with a different ID of Apple."

  I have three questions, if you meet one of them, the other those who do not need to answer. Reason by answering one of them answers the question, eliminating the need for my other questions.

  This is what must be answered:

  1: How can I pay for a purchase in an application, without using the Apple ID, I used to download?

  2. how to remove and reinstall Minecraft, without deleting its contents? (Worlds)

  3. How do I send money to another Apple? ID

  To justify:

  The second is more a question I should ask on the kingdoms of Minecraft, but you that someone here might know.

  Also, I have access to the Apple ID, but I'm not going to pay more money.

  I have money on the Apple ID iTunes, I want to send money money credit card.

  I would look into family sharing between more 2 appleID implement family sharing - Apple Support

  unless minecraft block shares then delete it and download it free for the other appleID and buy your dlc

• How to acquire of various AI channels simultaneously with a different range for each of them?

  How to acquire of various AI channels simultaneously with a different range for each of them?

  In LabView, I found some examples but in C it is not seem to be any.

  Or you can add channels one by one with individual instructions: the follwing code compilation and runs without error on vitual DAQ hardware:

  ERR = DAQmxCreateTask ("", &taskH); ")
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai0', 'AI0', DAQmx_Val_Cfg_Default,-5,0, 5.0, DAQmx_Val_Volts, "");
  
  ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai1', 'AI1', DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, "");
  
  DAQmxStartTask (taskH);
  
  ERR = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, & read, 0);
  
  DAQmxClearTask (taskH);
  
  

• How to delete SONGS double WMP 12 each with a different location?

  How to delete SONGS double WMP 12 each with a different location? Rich Moore

  Take a look at this: http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/duplicate-tracks-on-windows-media-player-12/16418a48-1409-4e31-8bd3-d727585d92cd

• How to map the same tag of the element with a different value in BI Publisher rtf model.

  Hello

  I have an xml file with the same name in the < tag > element and I do not know how to associate the same < tag > element to different string in the document rtf template attribute.

  For example: "' Eswitch <number > is repeated in this xml file, when I am mapping this element to the document rtf with a different string, I have same value 'D00002 ' . I should get values D00002 and DMR00002.

  < document >

  < TitleBlock >

  < number > D00002 < / number >

  < itemType > Document < / itemType >

  < lifecyclePhase > preliminary < / lifecyclePhase >

  < description > gtedgg < / description >

  < shippableItem > n < / shippableItem > < / cartridge > < / Document >

  < DMR >

  < TitleBlock >

  < number > DMR00002 < / number >

  < itemType > DMR < / itemType >

  < lifecyclePhase > preliminary < / lifecyclePhase >

  test nomenclature model bom1 < description > < / description >

  < POS > < value > Test < / value > < / POS >

  < shippableItem > n < / shippableItem > < / cartridge > < / DMR >

  < / AgileData >

  I followed steps below for map document model rtf with the same tag xml with a different value.

  1. install Office word 2013.

  2 BI Publisher for desktop software installed. It will add a BI Publisher plugin to the word document.

  3. with the help of desktop publisher BI, created a model of document rtf file.

  4 imported the document rtf template example xml file.

  The data is loaded successfully.

  5 tires model rtf field symbol to map the tags to xml to rtf document attributes element.

  7 saved the document in PDF format.

  
  

  Thank you
  

  Please mark it correct so that it is useful for others to find the solution to a similar request.

• How can I create a new master page with a different set of pages for the menu bar?

  I want to create a new Master Page that could be used for a different set of pages with a different menu pointing to other pages...

  For example:

  Master A to include a menu for pages:

  Page 1, Page 2, Page 3,

  Master B to the guests for the pages menu:

  Page 1, Page 4, Page 5...

  Maybe I would also do Master C and D with a bar of menus different total...

  But how can I isolate the menu bar from the rest of the pages that I don't want it?

  Right click on this page that you want to isolate > menu goto option > exclude from the menu.

  Hope It could help.

• How to set up a second monitor with a different view than the one on my laptop? [was: ron]

  I'm trying to set up a second monitor with a different view than the one on my laptop.  I have a HP Pavilion dv5 laptop and a secondary monitor View Sonic UP2365-LED.  They are connected with a cable 15 pin... my only choice on the laptop.  When I select the second monitor, it displays a box of a second on my laptop and the secondary monitor.  My pointer moves on both screens at the same time, no matter what display, I select the monitor 2.

  It depends on the whther the laptop can support both points of view.

  Somewhere with the right button on the desktop, choose "screen resolution" and that there should be only a drop down menu entitled "multiple displays".  Looks like you have "displays a duplicate" choose (if it will leave you) "to extend these screens.

• Signing with a different account

  HI - there was once a 'sign in with a different account' button we have many people who use our main computer and we need to connect with different accounts on different dates. How can we do that now? It is not an option to change user.

  Thanks for your help

  Open the Skype menu and select Disconnect. On the sign in screen logon with the account of different.

• How can I dictation in 2 different languages?

  I have conversations of messages with friends from different countries and different languages. How can I use dictated in different languages?

  Hello

  On your Apple Watch, after tapping on answer, press firmly on the screen, and then tap on choose language to a different language for your reply (including the dictation).

  The default language for any given conversation is on the same language as the active keyboard on your iPhone (in Messages) for this particular conversation. When you change the language of the keyboard for this conversation on your iPhone, it also changes on your Apple Watch.

  To change the language for a chat on your iPhone (and also on your watch):

  • Lock your iPhone (press the Sleep / Wake button briefly).
  • Open the conversation with this contact on your watch and press on answer.
  • On your iPhone, press the Sleep / Wake button briefly to display the lock screen.
  • The lower left corner of the lock screen, drag upward on the Messages icon (where transfer icons appear).
  • This will open this conversation in Messages on your iPhone.
  • Press the symbol of the globe by the SPACEBAR on the keyboard of the iPhone and choose your preferred language.
  • Start typing a response on your iPhone (one or more characters), then delete (implements the choice of language of keyboard for this conversation).
  • On your watch, in the Messages application, exit the screen to answer.
  • Start a new response when this conversation - the new language will be used for dictation and short answers in this conversation.

  More information:

  Use Dictation on your Apple Watch - Apple Support

• Xbox live error: my account is associated with a different profile

  I made a new xbox account and put in my Gamertag and when I created there and he has tried to sign up to xbox live, it tells me that my account is associated with a different profile. What should I do

  Original title: Xbox Live

  Hi Khyree,

  Thanks for posting your query in Microsoft Community.

  If your gamertag has been created for you during your initial registration of Xbox Live (which means that you have chosen yourself), you can change once. However, if you have chosen your gamertag to registration and wanting to change it later, you get an error of different profile and your Xbox Live account is charged. Please refer to the following article in the Xbox and check if the problem persists:

  How to change your Xbox Live gamertag

  In addition, see the articles according to the error messages you get:

  Xbox Live: My account | Codes and error messages

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to throw a disc to activate product cost

  My pc has been recently renovated with Genuine Windows XP Professional preinstalled software. I have enough protection antivirus on this issue soon, and my pc works now VERY s l o w!  I do not know how to throw disk cost to clean my machine again. Thought that he woulld come to the top when I inserted the disc, but it will not. Please help me because I'm a model.

  you need to set the bios to boot to cd player

  When you start your pc at the beginning of the POST you will see the logo to your pc, there will be a number here to support you to enter setup or bios, on mine it's F2, you must be fast, if it gets to windows screen, you will need to reboot and try again,

  Insert the floppy

  restart the pc

  start typing F2

  Set of cd to start everything first

  Save the changes and exit

  should get a black screen saying press any key to boot from the CD, it's the only time when you press a key, please see the links below for a good understanding:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  With clean installation images

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  Clean install XP sites

• What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• How to create vpn with vista home premium on basis of vpn xp settings?

  I can connect to the vpn with xp machine, but when I try to imitate xp setting with machine to vista Home premium I can't connect to the same vpn. What do you suggest me?

  How to create a vpn connection in Vista: http://techrepublic.com.com/2346-1035_11-61437-1.html?tag=content;leftCol.  NOTE: I don't know what you mean "based" vpn xp settings, but you will have to do the best you can with the options and settings available in Vista (that I n "' t know how they compare to XP, but I hope that you will be able to do so because).

  Here is another article on the procedure: http://www.publicvpn.com/support/Vista.php.

  Here is an article on how configure a VPN with an ISP in Vista: http://www.web-articles.info/e/a/title/How-to-create-a-VPN-connection-over-your-ISP-connection/.

  Here is an article with a number of different other items all on vpn in Vista (I don't know exactly what type of configuration you "AVIC - as a host, as a customer, on what type of connection,--but this article covers many different aspects and I hope that at least a couple will be a help for you: http://compnetworking.about.com/od/vpnsetup/VPN_Setup_How_to_Set_Up_a_VPN.htm.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Q5 cannot you sign in with a different ID BlackBerry on this unit

  Hello guys,.

  I need a little help here. I get following error when trying to check the BlackBerry ID.

  "You can't sign with a different ID of BlackBerry on this unit. Connect to original help BlackBerry BlackBerry ID original used on this device"

  That's how I end up here:
  I wanted to change the email address associated with my BlackBerry ID and to do that I deleted the orginal ID by using the email link 'remove this BlackBerry ID'. that I got when it was created for the first time.
  Also, I've recreated the ID with my original e-mail address, but even in this case to get the above error.

  Please, let me know how to fix it.

  Hi Bertrand

  You need to clear your Q5 first of all to apply different BlackBerry ID. Don't forget to backup your data via BlackBerry link before you wipe because all your data will be deleted. You can restore data after reset completed.

  See you soon and good luck.