How to: transparent text with border and transparent text box?

Similar Questions

• How to transfer iTunes with comments and followed by names, but keep the files of the song on external hard drive?

  I have all of my music stored on an external hard drive. On my old iMac, I have iTunes with all the songs on this hard drive organized or recognized as I like, with comments and play lists and track/song names and album names. How can I transfer iTunes as it is to the old iMac to the new MacMini while leaving the actual files of the song (> 2.5 to) on the external hard drive? In short, I want the old iTunes on my new computer, but the files of the song in the current HD thank you so much.

  (2.66 GHz, 4 GB RAM 20 "iMac; 2014 new Mac Mini)

  Hmmm...   Never tried, but I "think" it should work.   The reader will need to named exactly something on the new computer, as it was on the old.

  1. on the old computer, go to {user folder} / music/iTunes and move the files on the external hard drive.

  2. on the new computer in iTunes, go to Preferences > advanced and not select "copy of the file to the iTunes Media folder.

  3. always in this same window under "iTunes Media folder location", click on change.   Now select the location on the external hard drive, you have moved the files too.

  Files to be copied.

  iTunes Music Library.xml

  iTunes Library.itl

  iTunes Library Extras.itdb

  iTunes Library Genius.itdb

• How to connect text boxes?

  Hello

  First of all: I do not want to link the text boxes, I looked at that, it is not what I'm looking for.

  I create a small book containing stories of people. I do not know how what font or size which I use, and I don't know where I want to place all the images in the text. To do this, I want that every story in a different text box. This way, if I change the position of a photo in another story, he is not redistributing the text in all the other stories. However, I want the text boxes must be carefully aligned under eachother. However, if, say, change the fontsize of a paragraph text box, that text box must increase volume. Well well, which is easy to do. However, the area of text below that now needs to be moved. Very good, easy to do. However, all the text boxes below 50 also now need to travel! For every change I make that changes the size of a text area, I need to move all 50...

  Is there a way to make the beginning of a text box is the end of the previous text box, even if I move the previous text box?

  Or y at - it another way to easily do what I want without problem 50-page-text-reinvest?

  Thanks in advance for your feedback.

  Meph0 wrote:

  Ok thank you.

  I think I found a way that works for me. I can do a block of text that spans 50 pages (or else I might need) and fill it with text and images that I want to insert specific points in the anchor text. In this way, if I ever change anything, at least the images remain in their appropriate place. It will just be a huge text block.

  I think you misunderstand the concept of threaded images. You can't have a single image that spans 50 pages - a framework cannot be in both series only once - but you can have a thread containing 50 frameworks related, and this is the right way to address your problem. Anchoing images on specific points in the text is the standard method to ensure that they stay with the paragraphs appropriate when the text redéroule when editing.

  You should be aware that dress works a little differently with anchored objects. Film applied to an object that is inline will affect only the text after the inserted object. Film applied to an object that is anchored with a position of "Custom" affects only the text in the lines that follow the line containing the anchor point. In other words, it is sometimes necessary to anchor an image in a previous paragraph or a paragraph empty to keep the anchor. If the latter, you can set line spacing to 0 so it does not occupy any space on the page (it does not at the top of a column, however).

• How create 2 text boxes in inDesign to pdf interactive related?

  I created interactive PDFs with many boxes and in the box 'address', I want it to be on two lines in case of long text. When I turn 2 text frames related in boxes of interactive text, they became distinct. But I need the text is flowed by one box to another when the person is completing the form. Help, please!

  To bind form fields text is flowed from one field to another you will need to do in Acrobat with javascript, here is a link that describes the procedure. There is no way to do this directly in Indesign.

• How to scrolledPane/text box to display the last lines?

  I have a JTextArea in a get.
  
  I add to the text box and scrolls information off the visible portion of the screen.
  How can I force the scrollbar to always display the last few lines at the bottom of the screen when they are added?
  
  Thank you.

  See [url http://www.camick.com/java/blog.html?name=text-area-scrolling] text scroll area

• How resize the text box (box) without stretch text

  Hello! I'm editing a brochure in Illustrator CS4. There are blocks of text. I want to make the same width. But when I enter the width, I want... it extends (or fun upward) the text. When I manually stretch the text box, it works fine. But I can't get exactly do this way. Is it possible to enter the width and do NOT have the text distorted when resizing the box? Thank you.

  Julie

  Julie,

  You can directly select the path (white arrow).

  IIn this case, you can ClickDrag the segment you want to move.

  The guides are your friends.

• coffee spilled on a macbook: how to save files with critical and time sensitive information

  Daughter just spilled coffee on his macbook pro with the basic files needed for papers and research in a week.  How can she recover the files needed to access and use the work by the end of the term.

  The Mac dry for 24 hours then try to start.

  If after 24 hours he does not start, make an appointment at the Genius Bar

  If you can't go to an Apple Store, look for an authorized service provider > Apple - find

  If necessary, if all goes well it will be able to restore these files from a Time Machine backup > use Time Machine to back up or restore your Mac - Apple Support

• How to restrict access with usernames and passwords?

  I'm an intern in a manufacturing company who hired me to do a series of tutorials using Captivate.  The goal is to have a handful of employees (scattered throughout the world) to be able to go to the company Web site and take the tutorials & quizzes that I do.  I played with the advanced options vary a bit to get a feel for them, but I'm not finding what I need.  The employee that the company chooses to take these courses online should be able to sign in with a username and a password for a page that contains the courses listed there.

  Should I get our server/Web site managers to code all this, or is it easier (and it would make more sense) to make a presentation of Captivate referring to a list of the specific company e-mail address and allows them only these email address to have a user name and password created for her.  From this point, once the user connects, they see hyperlinks to the online course, they need to take.

  Any input on this would be very useful and thanks in advance!

  Close enough...

  And LMS is not the ONLY way to follow the scores and information, it is just the most common these days.

  Captivate allows alternatives, as for an acrobat.com account as you point out, or you can create a custom report page:

  http://help.Adobe.com/en_US/Captivate/CP/using/WS5b3ccc516d4fbf351e63e3d119e958285f-8000.h tml #WS365a66ad37c9f510-67fa130d1265cad66a2-7fff

  However, these methods do not provide for any security from the start.

  If your TI people are ready to set up a folder protected by password on your Web server and you configure your lessons to Captivate him make the acrobat.com account or a custom report page, perhaps you could accomplish what you need fairly easily (low cost). However, this approach can specifically permits not to track people. If you have a site with one generic login (i.e. the user: password), you can just about anyone with this user/pass. If you want each user to have their own username and password, which becomes much more complex. Can your IT configuration guy such a login page that syncs with a centralized database users (e.g. Active Directory)?

  So how do follow you that user through Captivate so the results of the lesson are recorded for the related user on your personalized page?

  It starts to get complicated, so an LMS may be easier:

  Moodle is a very popular, free LMS.

  http://Moodle.org

  Installation can be something internally (find a server, find people to install), but there are people out there who offer to host it for you.

  Here are some more:

  http://www.openelms.org/

  http://sakaiproject.org/

  There are also a variety of LMS commercial products out there, costs vary widely.

  This is what we use: http://www.inquisiqR3.com (link prices are on this page)

  Otherwise, here is a list of good references where you can choose a variety of filtering criteria.

  http://www.Capterra.com/learning-management-system-software

  Hope that helps!
  Erik

• How can I interact with mainvis and subvis without closing any of them?

  I have a mainVI which opens a Subvi perfectly and I m using the "VI Open reference' & the 'node of reference VI to call' to run the Subvi. However, once I open the Subvi and it s running, I can´t do something with the mainVI. The only way to interact with the mainVI new it s closing the Subvi, I want Don t that happens because I need the two work together and interact with both at the same time.

  Is someone can help me?

  Thank you

  Make sure that the property of Subvi is not floating or modalvalue.

  (Properties of VI... appearance of windows...... customize the behavior of windows)

• How can I print with black and white cartridge only?

  
  

  Hello

  Unfortunately, it is not possible to print using the black and white, while one of the ink cartridges are empty.

  Using black ink only possible while there's ink color as well.

  While the color ink is not required for the purposes of printing, there are required for, maintnance operations of the device.

  As the appliance contains an internal printhead (IIC() system, lack of color ink can damage the system shortly. This is why the device is not functional when there is no ink in order to prevent damage to the system.

  For users who wish to print using just black ink (despite the reduced print quality), many HP printers offer options. For example, a driver colour setting (by selecting "print in greyscale with the black cartridge only" in printing preferences) specifies printing using only black ink. In addition, many IPH printers can operate in "reserve mode", which allows the user to continue to print with just the black cartridge when the colour cartridge is removed or not installed.In HP IIC systems, all supplies are required to be installed in the printer for the printer to function
  
  (Source: http://h10060.www1.hp.com/pageyield/en-150/articles/howInkIsUsed.html?cCode=il)
  

  Kind regards

  Shlomi

• How clone a machine with customization and adding once run commands?

  Hey,.

  I started to use Orchestrator and I really like it. I'm doing something in it, but I encounter a problem. Before when I was cloning of a machine I was using the customization specification. Most of which can be made by Orchestrator, but I'm not able to find in the part Orchestrator of the code that would do the same thing as RUN ONCE comments customization section.

  Can someone help me?

  Thanks in advance

  Zbyszek

  Make it work for me, if I remember correctly.  I have duplicated "Clone, windows with signle NIC and credentials" and added an entry, runOnce (array/string), because Windows customization, Syspred with the 'Get' credentials inside he may take a commandList are the runOnce commands.  I also had to change the inputs internally "Get Windows customization, Syspred with the identification information" of the NULL value for the newly created runOnce.

• How to import layouts with vectors and direct type?

  I seem to have met a stumper on basic AE workflow. I would like to implement a workflow where I can set an application designs, then put in AE to animate and control the camera around. My intention is to make graphics like this: http://vimeo.com/25123730 (OK, well, not nearly as slick... yet)
  
  The difficulty is, if I throw my drawing in Photoshop after I import it, it will allow me to convert the direct type, but the vector shapes are pixelated all and I can't get them as vectors. If I throw in Illustrator, the shapes are net of all vectors, but my type is rasterized. I think that there is something that I have to Miss here.

  What is the solution?
  

  Missing you something, it's just like that. There is always hope for CS6 and beyond, but for now the only type of "vector", you will get Photoshop of text and the layer, which will be converted to AE masks, clipping masks if the PSD is imported as a composition. However, if you want to get an honest opinion: people obsess too much about this vector stuff. Many times it is not necessary to make it work still a raster image enough size and that's what I see looking at your example. The camera movements are not this extreme that they need excessive detail.

  Mylenium

• How to stack images with css and hide/show onClick?

  I have a problem.  I have spent still researching this and make me anywhere I need to have a few stacked images and when you click on each of the 3 links on the page, an image is displayed.  My page is at: http://animalhospitalofkennewick.com/dna.php.  Above the picture of the certificate, there are 3 links (summary, summary 2 Summary 3 1).  Contents 1 click on, I want the certificate image below to go to the image of DNA - 1B .jpg (Summary 2 link will display DNA2.jpg and summary 3 link will display DNA4.jpg).  How can I do this?

  Jeannette

  Jeannette,

  This demo looks more like what you want.

  http://ALT-Web.com/demos/CSS-disjointed-menu-rollover.shtml

  Just copy and paste my code in a new HTML document.  Change to your images.  Adjust as necessary CSS positioning.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• How to select elements with selectedItem and selectedIndex?

  Hello.

  I'm trying to selected and the point in a dropdownlist or combobox by using the selectedItem and selectedIndex properties. They do not work

  Internet browing I found many people with the same problem, which was already know in 2008.

  The easy controls ddcompontent.selectedIndex = value ddcomponent.selectedItem = item do not work.

  Can someone help me?

  I couldn't find a solution.

  Thank you

  Pbesi

  Yes, the load is asynchronous, you the selectedIndex property is applied before the

  DataProvider is updated.

  I have not use binding and the result event to set the dataProvider.

  then set the selectedIndex property.  You may need to call validateNow before adjustment

  selectedIndex

• How to improve integration with to and not

  There is a previous process that fills data doc_t.id. Lines normally about 10,000. Subsequently the main process is running:
  

  insert into doc_t
  (SELECT DISTINCT no2, NULL, NULL, NULL 
  FROM document_t
  WHERE  no1 IN (SELECT id FROM doc_t) 
  AND    no2 NOT IN (SELECT id FROM doc_t) 
  AND    msg IN (33, 2) 
  AND    doc_time <= '31.12.2009')
  ; 

  Post-processing transfers the data of doc_t and finally truncates. doc_t Table document_t contains lines of 300Mio.
  
  All the work runs fine most of the time. But if him preprocess inserts 10000 s of lines in doc_t, the work goes on for hours.
  
  How can we improve the insertion / design? Some options: we think:
  -document_t of partition and run processes parallel (permit required)
  -transfer doc_t into a temporary table
  -calculate the statistics on the table for doc_t before insertion
  
  What other options should be considered? Is there a way to avoid these / not in constructions (= redesign)?

  This should be faster, check yourself.

  insert into doc_t
  (SELECT DISTINCT no2, NULL, NULL, NULL
  FROM document_t a inner join doc_t b on (a.no1 = b.id)
  WHERE  no2 NOT IN (SELECT id FROM doc_t)
  AND    msg IN (33, 2)
  AND    doc_time <= '31.12.2009')
  ;
  
  create index doct_id_index on doc_t(id);
  dbms_stats.gather_index_stats(user,'DOCT_ID_INDEX');
  

  It is important that you gather statistics during the doc_t table is in a typical/filled State.

  Published by: René Jeruschkat, January 15, 2010 08:20

  Published by: René Jeruschkat, January 15, 2010 08:24