How to trigger workflows of revocation of the object resource?

Similar Questions

• How to specify if a location of the object with the margin explicitly?

  In CS4 (I don't know what on CS5)

  We have problems when, after deleting or adding pages with items especially near the borders of the page. And we want to explicitly specify objects if they are from the margin, or on the page despite their location and without technical way to anchored objects.
  

  First, create a file with three pages and make the inside margin wider than the margin as in the screenshot above.

  Next, create two objects:

  black background extends to almost spine.

  a block of text for title text and the white body.

  

  Remove the page number 2.

  Then you see the black background output pages related (because it is from the margin before deleting).

  So far, everything is good.

  

  Insert a page before the page 3 again

  The black background now has different location from the original one. (Why) I'll tell you.

  Because the object was compared to the margin before delete page 2 and become compared to the page after deletion.

  So I suggest that if there is a possibility to restrict a location of object to be compared to the margin or page although if he leave page borders or not. you want to add options in the transform Panel:

  

  If these two options are not checked, then it will be depend on the location as the technique these days in CS4.

  I use anchored objects to specify the location of a logo, an image or a background color using object styles. It is therefore possible to change their position through multiple documents with a single click. The only thing I want, is to insert the object embedded in a block of invisible text.

• How to trigger a dynamic action of the dynamic list entry?

  Hi experts,

  I use the apex of oracle database 12 c 4.2

  I'm creating an application on jquery mobile theme 50 I need to create a script as I've shown in photo

  

  select it user a floor and the ground must be highlighted and region tables should be updated and the corresponding

  floors tables must appear only without submitting the page

  I tried something else, but can not make it work

  I created the floor using dynamic lists how do I trigger the dynamic action to update the region of the table in the list of the selected floor

  question any help will be appreciated thanks in advance.

  Hello

  something to inspire:

  Dynamic JavaScript action

  http://www.eberapp.com/pls/Apex/f?p=blog:read:0:article:1695400346724960

  concerning

  J

• How to trigger SMU - 6363 AI with the PXI-4142

  Hello

  SMU-1082

  SMU-6363

  SMU-4142

  LabVIEW 2012 SP1

  Hello

  I'm trying to trigger action (SMU-6363) analog input with my SMU (SMU-4142). The API OR-DCPower has a VI called VI of Signal to export, that I could use to export the trigger signal in a specific line when 'Complete the event Source' comes up on my EMS.

  The problem now is that i ' v tried several lines to transfer the signal to the SMU-6363, but unfortunately I still have an error of DAQmx. Has anyone tried similar before sync? Which internal lines I have to use to get this working? I'm just not producing a moment of tension at the time that the EMS (Single, Point). After SMU has defined the level it must send the trigger for SMU-6363 who would then measure the external signals constantly.

  Thanks in advance!
  -henkka

  Hello

  I solved the problem of routing measure relaxation of SMU with Signal.vi export online PFI0 of SMU-6363 (SMU 3 channel). Then I started every other SMU channels (0:2) with this signal to trigger by using the configuration digital edge measure Trigger.vi (the VI input terminal is PFI0).

  I configured the data acquisition sample clock to use the PFI0 as a source of the clock. With this method I am able to measure sinus 2 kHz generated with four channels EMS individually with my DAQ without no phase shift (0.1 degrees) between own EMS measurement and data acquisition.

  Hope this helps anyone with the same kind of problem.

  Best regards

  -Henry

• How a BPEL workflow can return in the middle of the process?

  I had a BPEL process, and after invoking a web service, a response back to the client immediately, and the flow continues. However, I found that he did not return to reality, he returned after the process is complete. And if I added a component to wait 3 seconds. She would not immediately respond, but during performance tests, it seems the process would not continue after 3 seconds and cause other problems. Y at - it of to way the answer immediately returned without the component of waiting? Thank you very much.

  This behavior is specified... Even if you do an action to respond, the real answer will be returned only when he meets a dehydration activity. Different options available to you are:

  1. in the PS3, there is a new Checkpoint activity, which you must do immediately after the answer.
  2. in previous versions of 11 g, you can use a business exec of java with a call to breakpoint() immediately after the answer
  3. you define a component property called idempotentReply to true. Then you don't need no activity of dehydration explicitly in the bpel code. Drawback with this approach is that this setting will affect all operations on all the links of sponsors on the component.

• Does anyone know how to add commitments of CM on the dashboard resource use?

  

  I do not have a definition of the fields of the dashboard, I need to know if it is possible to add commitments or "CM" data to the dashboard above.

  Sure.  How to get the CM stand must also have RQ. Your authorized role must be defined as the necessary authorization.  Once a request is sent to the resource manager / functional, you will see numbers in the column RQ.  Once the request has been allocated and approved, you should see numbers in the column of CM.  If you need some help with this, call me or send me an email.

• How to apply an effect to all the objects in a group?

  Hello

  I use 8 Captivate, creating a sensitive project. I have about 9 objects in a group. Is it possible to apply the same effect to all objects in the group without having to do it individually for each element in the Group?

  Thank you

  Peter

  This is a feature request, I've been logging since some versions. If you want to support this, please do the same. Currently, he must do so individually. If it's a complicated effect you can create a custom effect, because this will save you the time to apply.

  Adobe - feature request/Bug Report Form

  Trajectories and custom effects reuse - Captivate blog Edition

• How can I move an anchor of the object while keeping the object in the same position relative to screen?

  I am want to drag an anchor object and the offset of coordinates of position by opposite amounts so it does not seem to move postioin on screen. Is there a tool for this?

  

• How can I download products purchased beyond the 30-day mark?

  I bought some time ago CS5. My computer crashed and I lost all my applications. How can I re - download?

  The normal resource given by the forums to download earlier versions is

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  where you can download trial versions.

  Very important instructions on this page before you click on the download links.

  After installation, launch the trial and enter your serial number to authorize.

• How to run a procedure with the object as OUTPUT parameter

  Hello
  
  I have a procedure and it composed of 2 parameters, there is an input parameter and it's some ID (NUMBER datatype) and 2nd parameter is an output parameter and it an object type. I want to run this procedure, but not able to do the same thing. Can someone please suggest me how to run a procedure that got the object as output parameter.
  
  Thank you very much in advance for your support.

  Example:

  SQL> create or replace type t_obj as object (ename varchar2(10), deptno number);
    2  /
  
  Type created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create or replace procedure myproc (p_empno in number, obj out t_obj) is
    2  begin
    3    select t_obj(ename, deptno)
    4    into obj
    5    from emp
    6    where empno = p_empno;
    7* end;
  SQL> /
  
  Procedure created.
  
  SQL> set serverout on
  SQL> declare
    2    v_obj t_obj;
    3  begin
    4    myproc(7788, v_obj);
    5    dbms_output.put_line(v_obj.ename||','||v_obj.deptno);
    6  end;
    7  /
  SCOTT,20
  
  PL/SQL procedure successfully completed.
  

• How to trigger the workflow of UCM criteria while pushing the Webcenter Imaging paper

  Hello

  (With the help of Webcenter 11.1.1.9.X)

  We work for installation of the Imaging Solution. I defined and activated a workflow of criteria to the AAU and able to trigger when I check in a document directly from the console of the Complutense University of MADRID. But this workflow does not occur when a document is pressed at the UCM Webcenter Imaging as part of the Imaging Solution.

  Is it possible to trigger workflow UCM criteria through validation of imaging profile somehow?

  As shown ( Doc ID 1286047.1), I realized that if we can fill metadata IdcService, flow of criteria can be triggered. But do not know how can I fill value to metadata IdcService in IPM for the document corresponding to a UCM.

  Any input would be greatly helpful.

  Note: according to the ( Doc ID 1253304.1), It is not possible to trigger the workflow of criteria if the document is pushed with the charger in batches. I am confused with these two Metalink. Please help.

  Thank you

  Abhishek K

  All notifications of OOTB in Content Server (workflow those subscriptions) will focus on your Content Server users. If your intention is to display an image from imagery (for example with additional annotation via the Viewer), this could be quite undesirable.

  Imaging, OOTB notifications are listed here: https://docs.oracle.com/cd/E23943_01/admin.1111/e12782/c02_security.htm#CDDGGHDI and it recommends BPEL.

• Trigger an email notice when the workflow mailer service is down

  Dear all,
  
  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?
  
  or which is the best method to notify when services are down. Please update...
  
  Thanks in advance...
  
  Kind regards

  We can trigger an email automatically from the operating system, if the Workflow services mailer goes down?

  Yes, by checking the OS workflow services - see (Note: 1054215.1 - how to check if the sender of Workflow runs) for more details.

  or which is the best method to notify when services are down. Please update...

  You can also use Oracle alert (use of the query in the same doc) - you can find the manual Oracle alert at http://www.oracle.com/technetwork/documentation/applications-167706.html

  Thank you
  Hussein

• How to trigger the dictation from the smart keyboard on the iPad pro.

  I use dictated on my iPhone and my iPad quite often.

  However on my new iPad Pro with the smart keyboard attached, I do not how to trigger the dictation from the keyboard.

  I don't see how to get the soft keyboard back to press the button of the microphone are there, such space suggested by some on this forum.

  This doesn't seem to work in the latest iOS Update 9.

  I would be fine with a hotkey, or have to invoke the keyboard of the shop, then press the button of the microphone, but I don't see how do either.

  When the Emoji button on the keyboard smart strike as the keyboard, the software keyboard emoji is displayed, the space but when I press the soft ABC capital but I cannot get to the regular keyboard with the microphone button.

  A possible alternative would be to use Siri to dictation trigger in recording a memo or another application, space but I didn't understand how to do this job either.

  Has anyone experience this problem and found a solution?

  Unfortunately I had to spend a good hour on the phone with technical support when they finally admit that it was an oversight by Apple.  I hope someone reads this post until they spend countless hours trying to understand something, but has no solution at the moment. Frustrated!

• How to trigger the new numbering of the lines in a group?

  Suppose we have an ORDER_DETAILS table with columns (ORDER_ID, LINE_NUMBER, DESCRIPTION).

  We have these lines:

  order_id, line_number, description

  17: 1, "A".

  17.2, 'G '.

  17.3, 'R '.

  17.4, "Q".

  Next, it inserts a new line

  17.2, 'K '.

  How to trigger the renumbering?

  This should be the result after renumbering.

  17: 1, "A".

  17.2, 'K '.

  17.3, 'G '.

  17.4, 'R '.

  17.5, "Q".

  Then we move the line 5 to line 2.

  How to trigger the renumbering?

  This should be the result after renumbering.

  17: 1, "A".

  17.2, "Q".

  17.3, 'K '.

  17.4, 'G '.

  17.5, 'R '.

  This question is related to another discussion:

  https://forums.Oracle.com/thread/1088303

  create the order_details table

  (number of order_id,

  number of line_number,

  Description varchar2 (30)

  )

  rowdependencies;

  Start

  insert into values order_details (17, 1, 'A');

  insert into values order_details (17.2, 'G');

  insert into values order_details (17.3, 'R');

  insert into values order_details (17.4, 'Q');

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	G
  17	3	R
  17	4	Q

  create or replace renumber procedure (number p_order_id)

  Start

  Update order_details od

  Set line_number = (select rn

  from (select rowid, RID,)

  / * for autocommit APEX active, etc. * / row_number() on rn (order of line_number, ora_rowscn desc)

  / * for autocommit = OFF favorite above row_number() (line_number order, nulls first ora_rowscn) rn * /.

  of order_details

  where order_id = p_order_id

  )

  where rid = od.rowid

  )

  where order_id = p_order_id;

  end;

  Start

  insert into values order_details (17.2, 'K');

  RENUMBER (17);

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	K
  17	3	G
  17	4	R
  17	5	Q

  Start

  Update order_details

  Line_number = 2 set

  where order_id = 17

  and line_number = 5;

  RENUMBER (17);

  end;

  Select * from order_details by line_number

  ORDER_ID	LINE_NUMBER	DESCRIPTION
  17	1	A
  17	2	Q
  17	3	K
  17	4	G
  17	5	R

  Concerning

  Etbin

• How to create the trigger WHEN-LIST-CHANGED to the text at the level of the item element

  Hi all
  I have a requirement that is to say that I developed on the form that contains an emp (empno, sal, job) details in the field of the form.job table (text element) contains lov. My requirement is when I select values in the lov it must create a new record in this tabular form. I did ' t get trigger WHEN-LIST-CHANGED at the level of the element for the work of i.e text point.
  
  I tried this requirement by making the point of work as working fine.i of an item.it list used NEXT-ITEM KEY also to make the this.but is not our business requirements.
  
  When lov changes he needs to create a new line.
  
  How we do that. Can someone give me an idea please
  
  Thank you

  Hello
  In the text element, you can use trigger KEY-LISTVAL and try to use the code as...

  LIST_VALUES;
  IF :FORM.ITEM_NAME IS NOT NULL THEN
    CREATE_RECORD;
  END IF;
  

  When list change trigger only for the LIST_ITEMS and fires when you try to change the list_item

  -Clément