How to upgrade my device status?

Similar Questions

• How to upgrade a device driver USB from 32-bit to support more than 64-bit?

  I have a USB device driver that supports only 32 bits of the system, now, I want to upgrade to support more than 64-bit systems.

  Please provide details on the changes required in the code of file & pilot .ini.

  Your question is outside the scope of what is usually covered in these forums that focus on the home - the average user. You can get a better answer to your question if you repost you the question in one of the following Microsoft forums instead:

  http://social.msdn.Microsoft.com/forums/en-us/WDK/threads

  http://social.technet.microsoft.com/Forums/en-us/categories/ .

  Thank you.  :)

  (I'm sorry, but I can't move this thread for you because the forums are running on separate platforms)

• Qosmio E15: How to upgrade Media Center 2002 SP1 to SP2?

  Hello

  My Qosmio E15-AV101 was shupped with Media Center 2002 SP1. I did the automatic update from Microsoft and also downloaded the SP2 package. Still, the upgrade process fails. When I'm tired, I contacted MS technical assistance for the reason my Media center rejecting the upgrade. Microsoft replyed than the version supplied with Toshiba and other equipment manufacturers are customized to match the hardware manufacturer full compatibility.
  Quote:
  "
  Notes of this part of the OEM and Microsoft agreement is to allow Original Equipment Manufacturer support for the products they have installed on a particular computer. The agreement was presented only the OEM often change and pre-install Microsoft software on their computers to ensure compatibility and to take full advantage of your computer s hardware. This means that the OEM has expertise on your Microsoft software on your computer in particular works.
  "

  So, is the solution to my problem. How to upgrade?

  Hello

  First of all it is a user to user forum and you won't find anyone from Toshiba.
  Secondly, as far as I know that your device was designed for an American market and if you are looking for drivers or updates you must use a Web from Toshiba site we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  If you have any problems with your unit, so you must contact the ASP (authorized service partner Toshiba) in your country.

  As far as I know that Windows Vista is not official on the market. Maybe the end of the year or next year.
  I can t believe that you are not available to install the updates. I checked a few comments and Microsoft updates have always worked.

  As I suggested at the beginning if you have some problems with your unit has so contact the service of Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?PF=true

• How to upgrade my firmware to the printer?

  Hello

  I'll do a tutorial on how to upgrade your firmware.

  This ensures that the printer is wise software up-to-date, and it gives you the features more to update that is available for the device you own.

  This video will show you step by step on how to update the firmware on your printer.

  More firmware updates will give you a list of what it will be Fix/improvement:

  For example:

  Fix/development:

  (1) improve the Diagnostic ePrint for ePrint Setup report
  (2) improve the ease of wireless configuration
  (3) integrated Web of enhanced Services
  (4) improving the print quality
  (5) improve ink consumption
  (6) improve the performance of path of paper
  (7) to improve the performance of numerical analysis

  If you have any questions let me know.

  I hope this helps!

• How to upgrade the driver for my video card?

  How to upgrade the driver for my video card?

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  Original title: SoundMAX Integrated Digital Audio

  How to upgrade the audio, video and game controllers on Windows XP Home Edition?

  I need SoundMAX Integrated Digital Audio

  Hello

  Why you trying to update the audio, video and game controllers?

  The following steps may be helpful:

  1. open the Device Manager.

  2. Locate the audio, video and game controllers and expand it.

  3 click the sound card, and then click Update driver.

  For more information: http://support.microsoft.com/kb/283658

• How to upgrade my video card?

  My kids want to play minecraft on my laptop but I get this error msg

  Bad video card drivers!
  -----------------------

  Minecraft could not start because it did not find an accelerated OpenGL mode.
  Generally, this can be corrected by updating the video card drivers.

  How to upgrade the video card?
  Please help =)

  Thank you

  Hello

  If it is a laptop, you cannot change the video card. Only thing you can do is to
  of course, you have the most recent drivers. Laptops almost always have a built-in video device
  that is wired in and cannot be deleted.

  Check with the manufacturer of the laptop computer for updated video drivers.

  I hope this helps.

• HP laserjet p1007: extraction device device status

  Mr President, my system creates the problem of the status of the device:-extraction device.

  Hi @akash11,

  Thank you for joining the HP Forums!

  I noticed your post on how continues to change your status of device to remove device, for your HP Laserjet p1007 printer. I'm happy to help you!

  If you please, try the procedure described in this guide, Print Jobs stuck in the queue (Windows)and let me know the results!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope for this guide helps!

• How to upgrade Dev C alpha to the latest version

  Hi guys

  the latest OS update version available for Dev Alpha C is 10.1.0.1485. (https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html)

  However, actual devices can be updated to 10.1.0.4181. As far as I know dev devices alpha can only be updated through automatic charger provided here: https://developer.blackberry.com/blackberry10devalpha/devalpha_update.html

  BlackBerry link or update on the device in the settings menu is not possible for alpha machines.

  Does anyone know how to upgrade the alpha machines to the latest version of the OS that is available for actual devices?

  Use this: OS10 upgrade using the automatic charger devices

  lunaplena wrote:

  There should be updates options in the device.

  lunaplena, there are options.

• How to charge BB device software classic classic blackBerry

  I have had trouble with bugs in my classic and tried to reload the software on the BB link.  I am running BB version 1.2.4.39 link and went to 'preferences', then "Reload Device Software".  I'm invited to accept that he will wipe away all my data and product to search for updates.  While it is looking for updates, the phone I plugged in via USB cable stops and restarts.  Update says there is no update, the phone restarts and gives me no option to reload the software.

  I'm doing something wrong?  Can someone help me?

  Hello

  FYI, Update Web site is exactly that... updates. LINK and/or automatic charger can provide a real own refill.

  Official methods, which will be controlled as to what exact OS versions are available:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-functions-and/how-to-reload-your-Blackberry10-O...

  Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

  Be aware of the risks of 10.3.2 however... There are two things to worry about. First of all, be 100% sure that you know your BBID identifiers... If you do not, you may make your useless device to anyone, including yourself. Second, once you move to 10.3.2, you cannot fall back to 10.3.1 or earlier, by any medium (for example, even the unofficial AutoLoaders can not overcome this restriction anti-secours).

  Good luck!

• Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

  Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

  I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

  There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

  • Remove or reconfigure newly installed unit.
  • Restore the version before your driver update.
  • Use system restore to undo recent changes in Device Manager.

  Step 1: Roll back the driver to the version before your update.

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

  http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

  I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

   

   

  Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

  Thank you.

• Z10 blackBerry how to upgrade my cell phone number?

  Hi everyone, just had my number worn from another network, but my device displays always the orioinal that issued with the phone.

  I know on older Blackberry, you can manually update this but I can't find anywhere on my Z10.

  Anyone know how to upgrade.

  Thank you

  From the home screen, pull down > settings > Security and privacy > Sim Card.  Press the button change the phone number.  There you go.

• How to upgrade multiple textfields different managers of a screen?

  My camera - BB Torch

  JDE - BB JDE 6.0

  Hello

  I have a main screen, containing the three following horizontal frames. each contains a rich text field and other components. I'm listening to global events.

  on the event, update all fields of rich text and add/remove some components of managers.

  I am gettting the eventlock of the user interface thread before putting on the screen.

  But the screen is not updated. The first richtextfield gets updated properly. The rest of the screen is updated until I start the application (the data is populated based on data stored in a persistent manner)

  synchronized (UiApplication.getEventLock())
  {
      iVStatusScreen.iRTF_SOC.setText(info[1] + "%");
      iVStatusScreen.iRTF_DAT.setText(info[0]);
      iVStatusScreen.iRTF_ChargeTime.setText(info[3]);
      iVStatusScreen.setBatLevel(info[1]); // function which removes or adds or scales certain image fields based on the battery level
      iVStatusScreen.setChargeStatus(info[2]); // function which adds/removes or changes the image field for the charging status
  
      iVStatusScreen.invalidate();
      iVStatusScreen.iBFM.invalidate();
      iVStatusScreen.iHFM2.invalidate();
      iVStatusScreen.iFFM.invalidate();
  };
  

  the iRTF_SOC of rich text field is updated correctly. the rest of the changes does not appear until the screen is created again.

  How to upgrade to the full screen.

  I tried to invalidate the entire screen and individual managers too.

  no need what, whether setText invalidate does this automatically.

  Check the values you have with the debugger. are the referenced fields added to the screen in time? Check with the debugger, too.

• How to upgrade the Switch application icon

  Hello

  I'm working on a UiApplication in Java that runs in the background all the time.  I need support the 7290, some 8,000 s and the "BOLD".  The screen resolution is very different between the 7290 and "BOLD" and the icon that looks good on the 7290 seems jerky on the "BOLD". And the icon that seems good on the "BOLD" is not full screen on the 7290, and we know, that there is a problem.  So, I followed the information contained in these two links to update my icon based on that screen resolution that we, to make my icon looks good no matter what device has a user.

  BB in Knowledge Center article - how to set an icon of overview

  BB Forum of Discussion on the overview icon

  Now on the 7290, I use an icon of size 32 x 32 pixels and on the "BOLD", I use an icon of size 64 x 64 pixels.  I know that 64 x 64 is not the recommended size for the "BOLD"... and it looks better for what I do.

  OK, so to enter some details, I have a main entry point, which has an icon associated with it (which is the icon that I have 'default', you can tell).  And it's the icon of my startup code updates (via HomeScreen.updateIcon (getHomeScreenIcon (), 0) and is what you see in the Applications folder (or on the main Menu, depending on what device, of course).)  And on the menu, when you click this icon, it brings my application in the foreground and here we go. It works just as advertised and is great.  I have the icon on the right showing on the right screen resolutions.  No problem.

  Is then where I run into trouble.  I have another point of entry, who calls my startup code and gets my application running in the background.  It has an associated icon also (once again just the icon I want 'default' before I can get the Update icon.  It is the icon that can be found on the Ribbon for switching applications (when the user presses ctrl-esc).

  And once again, in my startup code, I try to use - HomeScreen.updateIcon (getHomeScreenIcon (), 3); -Please note the different entry point number that corresponds to this entry point.  I checked the CAP file to determine the correct entry point number and this update still does not take effect.  I also tried each number from 1 to 5, no chance.  I can't get this icon to update.

  How to upgrade the icon that appears on the Ribbon for switching applications?  And if I can't be updated for a reason, how can I specify a different icon for different screen resolutions?

  Thank you, Tara

  PS. I use JDE 4.1.0.185, simulators and devices of 7290, 8100, 8300, 9000 (Bold).

  The issue of the HomeScreen.updateIcon do not update the icon displayed in the application of task switch has been resolved in BlackBerry handheld software version 4.7.0.  The only work-around from earlier versions is to have several versions of the application that are built with different application icons.

• How to upgrade to Windows 10

  OT-windows 10

  How to upgrade windows 10 in my laptop?

  Hello

  Welcome to the Microsoft community.

  Windows 10 will be a free update for Windows 7 and Windows 8.1 qualified upgrade devices in the first year. This upgrade offer is for the full version of Windows 10, not an interim or temporary Windows 10 version. You will not be required to buy 10 windows on devices that take advantage of the free upgrade offer after this lapse the offer.

  If you are on Windows 8, try to upgrade to 8.1 in shop Windows, and then try to upgrade to Windows 10 by using the installation media.

  Helps the upgrade to Windows 10

  http://Windows.Microsoft.com/en-in/Windows-10/help-upgrade-Windows-10

  Frequently asked Questions: Windows 10

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/frequently-asked-questions-Windows-10/5c0b9368-a9e8-4238-B1E4-45f4b7ed2fb9

  Upgrade to Windows 10: FAQ

  http://Windows.Microsoft.com/en-us/Windows-10/upgrade-to-Windows-10-FAQ

  I hope this helps.