XP update causes background to disappear and the display is not working.

Similar Questions

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Aspire S7-391 pointer has disappeared and the trackpad is not working

  Hi all

  I've updated my Aspire S7-391 to 8.1 Windows and now the trackpad is not working, nor the pointer is displayed on the screen. Can I use a USB mouse without problem, and the touch screen works very well. However, even after you have installed the latest driver to trackpad MOMENTUM and by adjusting the settings, the pointer refuses to appear on the screen. Suggestions for corrections are most appreciated.

  Thank you!

  Hello..

  You can press and hold down the Fn key and press the T key to check if the touchpad works.

  If you have no answer, please uninstall the driver from Device Manager and restore the Acer recovery management pilot.

• 10.9.5 security Update 2015-008 installed yesterday and the camera does not work

  Hello

  Updated with security update 2015-008 yesterday on 10.9.5 and iMac 27 (end of 2013 - iMac14, 2 Intel Core i7 3.5 GHz) camera (UVC camera VendorID_1452 ProductID_34065) no longer works in Skype, FaceTime, or photo booth...

  It is most annoying. Thank you for advice or guidance.

  Tarkan

  One of them will solve your problem of camera:

  (1) If your Mac restart does not solve the problem,

  (2) use http://support.apple.com/kb/HT2090 from Apple.

  (BTW - troubleshooting section called an "iSight" camera.  However, after that article was published, Apple has changed the name of the built-in camera on the recent "iSight" Macs "FaceTime", then "FaceTime HD."  Whatever the name of your built-in camera, the same info and troubleshooting applies.)

  Be sure to test several Apple app (photo booth, FaceTime, iMovie, QuickTime Player, etc.) in more than one user account.  Do NOT use the 'Guest' for this test account.  If you don't have more than one user account for testing, create one now.  If you need help, how is explained in http://support.apple.com/en-us/HT201754.

  A 'Standard' user account is all you need for the tests.

  (3) If your camera will work correctly even with Apple applications, use OS X Recovery to completely reinstall your Mac OS since system recovery stored on your startup disk.  Don't bother test Skype or other 3rd party apps until you have your camera works with applications Apple.

  (4) If none of the suggestions above resolve your issue, contact Apple or one of the Apple-Authorized Service Provider to have your Mac professionally repaired. Don't forget to back up your Mac and Deauthorize iTunes before the call for tenders for the service.

  Post edited by: Jim EZ

  Mac OSX 10.11.2

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• After 10 Windows Installer on Audio SW5-11-18R3 and the camera will not work. How can I fix?

  Tried the upgrade of Windows 10 initially, but it failed with "lack of disk space", then installed full media and all but the Audio and the camera does not work.

  Hi all

  I would just like to make the point that there is a fix that has been made available and applications for a Windows Update is also underway. I'll link directly to the file located on our page drivers and downloads.

  
  
  
  
  
  
  
  
  
  
  
  
  

  Patch

  Acer

  1. fix camera function fail after upgrade to Win10 TH2.

  20160506

  91.7 MB

  30/05/2016

  Download

  Thank you
  Cory

• CD drive does not open and the light does not work

  original title: single CD player problem

  The problem with my CD player seems to be unique I can't find an answer, or someone else with the same problem online.

  My computer is custom built, the CD player lasted me 1.5 years no problem, not until one day I realize, it does not open and the light does not work on it, I ordered a new drive and installed that one, still does not work. so, I replaced the SATA cable which connects to the motherboard, still does not.

  When I go to my computer the drive appears but when I right click > eject it says: "year error occurred while ejecting CD drive D".  It also appears in devices such as SCSI CdRom Device Manager but I am not sure if it's actually my CD player.

  I also tried troubleshooting http://support.microsoft.com/gp/cd_dvd_drive_problems and no solution.

  WTFFF ideas? I really hope that its not the motherboard

  There are two cables you need to connect to the drive, one for data and one for power.  You must connect both training at work.  If you only have the data cable is plugged and not cable power which would be a possible cause of the problem that you see.

  "Ryanb1290" wrote in the new message: * e-mail address is removed from the privacy... *

  Sorry, im just of knowledge about computer hardware.  you say that I should try a different agreement or another port to plug in?

  I tried to connect on a couple different SATA ports on the motherboard.

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• C1765 done yellow toner a printer roller noise rattling and the printer does not work

  Hear a clicking noise when printing.  Replaced the yellow toner and the rattling is still strong and the printer will not work.  The noise and the vibration felt on the new toner only occurs with the yellow toner.  What is happening, is the printer goes wrong.  "low density, yellow to replace the cartridge, printer restart" I just put in a new cartridge.

  Hello David,.

  Please post on the forum. According to the information you provided, it looks like you have a mechanical failure within the printer itself. This device is more compact and carriers Dell limited parts, the best option at this stage would be to replace the printer. It is the course of action we would take if the product is under warranty.

  Kind regards
  Joseph E

  #iworkfordell

• When I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.

  My Roxio VHS TO DVD movie editing program has worked on my laptop Toshiba Windows 7 system before I reformatted.  Now when I open Roxio it changes the screen resolution of 256 colors at a very low resolution b and the program will not work.  When I close the program Roxio the resolution of the screen reverts back to 256 colors.  Control of program compatibility tells that it's incompatible, but the program worked on my system before I reformatted.

  Original title: programs Application Applications compatibility

  Hello

  You can install the program in compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the status.

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

  Copy the contents of the cd in a desktop directory.  install from this directory.

  or

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6,7. 5.7.1|  4.4 | 3.6
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Germinate by HP: bought a sprout of HP and the microphone does not work

  I bought a HP pushes about five months ago. I recently discovered that the microphone is not working when I tried to use it on an application that I have. It's windows 10 and always up to date. I tried to download the audio drivers from the HP site, but that did not help. I've also given to plant affecting several times, but this has not fixed the problem. Any suggestion on why a microphone may not work? Any input would be appreciated with thanks a lot.

  Hi there @noramus,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with the microphone on your Sprout. I'm happy to help you with this.

  Please try this document: computers HP - problems of Microphone (Windows, 10, 8)and let me know if it is useful or not.

  I can't wait to see you response of r, but if this document solves your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.