How to use Toshiba T icon as a shortcut to an application from Toshiba

Similar Questions

• Equium L10: How to use Toshiba Recovery CD to install the OS

  Sorry in advance if this might be a stupid question, but I have not re-installed the operating system for years and don't know how to do.

  I think I need to reinstall cause i've got my laptop for almost 2 years and it became too slow with lots of error messages.

  Have Toshiba Equium L10 with Windows XP and a recovery DVD. The DVD contains Windows XP? Should I format my laptop first or just insert the DVD and follow the instructions?

  And after everything is done all the garbage will be gone and it will contain Windows XP only? And yet one thing I am concerned about my internet work later (I have a cable connected to the LAN) or I will have to do something?

  Thank you for all the advice!

  Hello Laura

  The previous user explained everything very well. For the new operating system installation you must use supplied recovery media. It contains BONES, all the drivers you need and also all Toshiba designed and utility tools.

  Procedure recovery takes about 20 minutes, but after that finish you'll still factory settings as the first day.

  Regarding your use of the Internet I can not tell you much, but try to connect LAN cable and you will see how it looks like.

• How to use Toshiba Bluetooth stack again on 3rd party computer for 30 days

  Sorry if this is back to basics.

  I have a Dell Latitude 610 Bluetooth built with driver versions 3.03.
  When I try to connect my Nokia via PC Suite, it says the drivers are the old version and must be 7.0plus.

  How can I get the updated drivers that last more than 30 days?

  Hello

  You should check this Toshiba BT portal and the HowTO section:
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  There, you can find this document:
  http://APS2.toshiba-tro.de/KB0/FAQ81021V0000R01.htm

  It is said that you should use the BT stack/driver from the manufacturer of your laptop!

  See you soon

• How to use AppleScript to create a menu shortcut in figures?

  Does anyone know how I can create a pop up menu numbers using AppleScript.

  say application "Numbers".

  activate

  say le first table of the sheet active of the document 1

  the value the format of cell "B3" to popup menu

  end say

  end say

  I can create a pop up menu by using this code, but this is the default list.

  If I have a composed list {'mouse', 'Keyboard', 'Trackpad'}, how would be to create a context menu with these items?

  Thanks in advance.

  Steve Longley

  Hi Steve,.

  I wonder why you feel the need to use (or what you think you would get to use) an AppleScript to create a cell in the context menu.

  With the help of numbers 3, it's a fairly simple process:

  Open a table, or use a column with enough empty cells to accommodate the menu in the menu items.

  Access to the list of items of a line in your column.

  

  Select all cells that contain entries.

  Open the Inspector to Format, choose the cell, choose the context menu.

  

  Any selected cell now contains the same menu, each set to the original value in this cell.

  If you want that each menu includes a "white" cell, then:

  Select all the cells (three).

  Modify the beginning with... pop - up 'Start with white '.

  

  Click on one of the cells, and then click control v next to the cell to display the menu choices. Each cell contains the same menu with the value initially entered in the selected cell, so what a no point, which will produce a cell empty, at the top of the list.

  

  The menu can be copied and pasted into other places or can be filled in the column or line using the handles to fill yellow appearing in the centres of the edges of the cell when the mouse cursor is brought near. The cell glued/filled setting will be the same as that of the pasted source cell.

  Kind regards

  Barry

• A villain. How can I change the icon of my screen of my application GUI of an alternative starting point

  Hello

  So I have 1 app, 2 starting points. 1 point is running in the background at start-up of the device and not including any icon or gui this point listening to BlackBerry push notifications. Point 2 is on the side of my application GUI and does not run in this case. Now the point 1 receives a push message and wants to update the icon of my application to the point 2.

  Point 1 does not have an icon so net.rim.blackberry.api.homescreen.HomeScreen.setNewState (true) will not work!

  Point 1 must somehow point 2 and updated updated icon who.

  How then?

  http://www.BlackBerry.com/developers/docs/7.0.0api/NET/RIM/BlackBerry/API/homescreen/homescreen.html... int) should work, with the index of your app gui most time that some experiences helps here.

• How to use today's date in liquid when it is called from a campaign by email

  I have an email campaign that is configured to run every 7 days and I want to restore specific entries of a Web application based on the current date.

  I use the below in the content of the email:

  {module_webapps myCategory = 'Cat1' render = "collection" template="/layouts/custom/rounds-collection.tpl" id = "cms-towers" filter = "all"}

  and within the referenced model, I use the below to get today's date.

  {assign % = globals.site.dateNow | date: "yyyy-MM-dd" | convert: 'day'-%}

  The problem is that globals.site.dateNow makes whites when called from a campaign by e-mail.

  If I use the same method as before in a web page (rather than an email campaign), it works perfectly so I guess that globals.site.dateNow is not available in an email campaign.

  That's why I tried another way which is to pass another parameter of the module including the delivery date of the email (as shown below):

  {module_webapps myCategory = make 'Cat1' myDate = "{tag_deliverydate}" = "collection" template="/layouts/custom/rounds-collection.tpl" id = "cms-towers" filter = "all"}

  It is however is to make meanings like 'text' in the email. He has successfully replaced the {tag_deliverydate} with 'October 19, 2015', but it does not then decipher the tag module. I guess it's a bit a chicken and the egg tag thing which should make first.

  How do date 'today' or "email delivery date" available in my template file, then use this value in my liquid logic in an email campaign?

  You cannot run javascript in the emails.
  What you try to you can still.

• How to use Gallery of filters on an Image that I made from photoshop?

  So I edited this image of me on Photoshop basically I used the quick selection tool and then just back up my car and stuck on a transparent background and now I want to use in Illustrator and kind give as a funky look, you know as ocean waves or charcoal you know something like that but it wont let me it please help?

  in illustrator, you must track of images > photo high fidelity > expand first

  You can then use the effects

  or in photoshop, something like

  Image > adjustment > reverse

  image > adjust > curves to darken the face more

  Select background, and then apply a gradient orange

• How to use the Shell of the user interface with multiple applications (ear)

  I use 11.1.1.6 JDeveloper.

  I want to modularize the functionality in applications (ears) and use the Shell of the user interface as a navigation mechanism between applications and single entry.

  Is this good?

  What is the use of Shell of the user interface best practices.

  What about security (2 AA)? Security of the ADF?

  Thank you

  Hi user,

  You can use the shared library ADF function if you would like more information

  http://andrejusb.blogspot.AE/2010/07/deploying-ADF-applications-as-shared.html

  use the adf security

• How o use an icon in a standard report to display the details by using a hyperlink with APEX 5.0

  Hello

  I work with APEX 5.0.

  I would like a report (classic) display a report of details (also classical report) using a hyperlink, but not a "text-hyperlink" like 'click here for details'.

  Instead, I want to use a small icon which will occur the same result when you click on.

  It works fine, when the hyperlink is defined as text like: 'click here for details'.

  When I try to use an image, I don't get the desired result.

  Here's what I tried to Hare:

  1)

  Link-> Link attributes, then filled column: src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40 ' or img src =" & WORKSPACE_IMAGES. " "" #ICON_NAME # "width ="40"height = 40.

  = > no picture for the items in the column, but the link already created for each column of the remains (and works)

  2)

  Formatting of column-> HTML Expression, then filled: < img src = "& WORKSPACE_IMAGES. "" #ICON_NAME # "width ="40"height = 40" >

  = > the image appears for each column element, but the hyperlink is gone.

  Somone has idea how to use a picture/icon to have a hyperling in screens reported a detail?

  Thank you in advance for sharing your experience.

  Kimd cordially

  Hi Patrick,

  Link to the column-> then filled:

  Link text = #ICON_IS #

  Link attributes =.

  Target = this Application Page

  Page = 5

  Article 1 = P5_DEPTNO

  Value 1 = #DEPTNO #.

  Article 2 = P5_DEPARTMENT

  Value 2 = #DNAME #.

  Put this   in the link text not in attributes of link

  Remove the code from the link attributes.

  I don't have how to make it the way that describe you.

  Apex. Oracle.com is a hosted version of application Express, you can build online applications.

  Go to this link and the application workspace https://apex.oracle.com/en/

  Hope this helps you,

  Kind regards

  Jitendra

• How to use my Satellite A200 correctly?

  Say please and how to use my satellite a200 if all the time to work from electric power 220V? And so the battery is charged to 100%?
  Eject or not?
  Thank you...

  In my opinion, it's your decision. If you want you can remove the battery, but I recommend to use the laptop with battery power from time to time. It is very important to discharge the battery almost at 0% and reload again. Do this every two weeks and you should not worry about the battery life.

• How can I use a few icons on the personal bar

  I would like to see all my favorites... so, how can I use only the icons and not the text on my bookmarks bar?

  • Roomy Bookmarks Toolbar: https://addons.mozilla.org/firefox/addon/roomy-bookmarks-toolbar/

• How to use the software keyboard Toshiba 50L9450VE TV?

  I just bought a LED TV model 50L9450VE. When installing, I need to enter the password for the wifi network. The remote doesn't have a keyboard of the letter, and the TV shows a soft keyboard to enter the password. How to use the software keyboard? I can't figure out how to get the cursor in it; the manual does not say, and I can't find the information online. Thank you.

  Hershel

  Suppose you are from Israel? Although this model is not made for the EU market, but probably for the Asian market, it looks like the European L93 series.
  You will find how to operate the software keyboard (page 52): http://www.toshiba-om.net/pdf/manual...h-Specific.pdf

• Qosmio F30-127: how to use the SD - no SD card reader icon

  Could someone how to use SD F30-127.
  I tried to get the image from my SD card.
  I inserted in the slot, but no drive ICON displayed

  Hmmm. Please check if the SD card has been recognized in the Device Manager.
  There should be no yellow exclamation!

  Another allusion;
  -Remove the SD card in the slot
  -Go to Device Manager and remove the SD card controller
  -Now reboot the laptop
  -After restarting again windows should recognize and install new hardware. It is a SD card controller.
  -Now, try to reinsert the SD card!

  By the way; have you used the format SD card?

• How to get a desktop icon to open enlarged using IE8?

  OK, I'm back with the eternal question. How can I get an icon of Web site that is saved on my desktop to open in a maximized State? I'm using IE8 and Vista 64-bit. Internet Explorer window opens now enlarged very well, but all of the icons that I save on my desktop have no function enlarge when I right click the icon. All previous efforts such as you drag the image up, then close it while holding down the control key didn't work. I installed a third-party program, "Autosizer", which works fine until the last round of Windows updates. Now it has compatibility problems, so I had to uninstall this program. Microsoft has a fix yet? Help, please.
  Charles

  Charita142,

  This procedure works perfectly for almost any version of Windows, including Windows 7. I just bought a computer with Windows 7 and had the same problem, but I set myself for this procedure. Here it is again. This should do it for you as long as long as you follow the steps correctly. Now all Windows IE to open come expanded no matter what I use to open them. I use the right-click of the links opening in a new window all the time and now they are all open. It is true of all the desktop icons that I do for Web pages as well as for all the shortcuts located in the taskbar. Everything works fine now. The funny part is that the solution to this problem is exactly the same as it was for XP or Vista. I think we just were we not followed the steps correctly, but in any case, here is the solution:

  Open a Web page. Soft at full size. Do not use to maximize.
  Choose any link on this Web page and right click > open in a new window.
  Stretch this second window to the size desired-do not use maximize.
  Close the first window of IE. Then close this second resized window.

  This is exactly as it was in previous versions of Windows. It worked perfectly for me. Good luck with it.

  John

• I use windows XP, there is no bluetooth ICON on my control panel. How can I get this ICON?

  How di get the Bluetooth ICON in my control at the top of the Office Panel?

  Your computer actually have installed Bluetooth?  Are there drivers for the Bluetooth device installed?