How VPN from my PC at home to my network of vCloud Director?
Greetings.
I would like to than VPN from my home to my vCloud network office. I have a vDC on vCloud Director 1.5 (offers my provider, I know it's outdated), and it is connected to the internet with a static external IP address - 203.59*.x.x. The vDC has 2 virtual machines.
-J' did some reading and found where to configure VPN site to site network properties. After clicking on "Activate VPN site-to-site", what do I do next? If I add > remote network, I'm supposed to fill my 'peer IP' - that is the IP assigned randomly my ADSL modem gets to the internet service provider? It feels useless, because it changes whenever I'm in again. What is my "door of peers"? Is it my home router, 10.1.1.1?
-In addition, how one configures the VPN dialer on the desktop itself? When I tried it, it prompted me to add a user name and a password, but there was no requirement these when I enabled VPN on vCloud Director.
The documentation, I found online about this reference to vCloud Director 5.1, which is not what I use, or difficult for me to understand. A guide step by step would be great. Long story short, I have no idea of what I'm doing and could use some help. Thank you.
Site to another looks to fill two networks via VPN. This config page you are looking at is saying connect this vShield edge gateway to another VPN device at a remote location. the? is the IP at the remote location configuration.
I don't think it's like a PPTP or OpenVPN connection as you would get on DD - WRT or something like that. It's just a site to join sites, not Client Server (the server, you are the customer). Although it may be possible, I did not do.
Tags: VMware
Similar Questions
-
How to get version vcloud director using Powercli 5.1
Hello
After how can connection to vCD (using Connect-CIServer), I get the vcloud director (for example 5.1.1 or 1.5.0) version? Thank you.
Global $: DefaultCIServers | Select name, version
-
How downgrade from Windows 7 Ultimate to Windows XP Home Edition?
How downgrade from Windows 7 Ultimate to Windows XP Home Edition? I understand that what is happening back, but my printer & a lot of programs that I can not afford to replace now is not compatible with Win7. I tried to insert the WinXP disc, but he says the facility is "blocked due to compatibility issues".
Hello
To install windows XP on windows 7, you need to start your computer while the cd is in the drive. This will allow the system prompts you to "Press any key to boot from the CD-ROM.." and then follow the instructions accordingly.
I hope this helps.
-
How downgrade from Vista Home Premium to Vista Home Basic
Original title: I tried to upgrade Vista Home Basic to home premium how to uninstall and restore my previous settings on my laptop in my Home Basic
How can I delete what I've installed and return to my Home Basic
Hello1. Why did you downgrade to Vista Home Basic?
2. how upgrade from Home Premium?3 did you use Windows Anytime Upgrade to upgrade?
4. do you have the basic install of Vista Home Edition support?You cannot revert to a previous version after you upgrade, the only option you have is to clean install Home Basic. I suggest you back up your data on an external drive or another computer and do a clean install using the installation of Vista Edition family media Basic.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Is this possible and how? : install a Windows 7 Home Premium OEM from a laptop to a netbook with a Windows XP OEM computer
No, this is not possible.
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GBLicensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspxYou will need a new license:
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Version upgrade - Microsoft Windows 7 Home Premium Upgrade
Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)
-
How can I block a VPN from site to Site traffic
I configured a VPN from Site to Site, the wizard on a
ASA 5510 and it works.
However, I want to restrict http traffic only.
I tried to change the ACL entry that allows ip traffic to allow only http traffic, but that seems to block all traffic and translates into a journal entry:
Inbound TCP connection doesn't deny x to Y/80 SYN flags on the incoming interface.
I managed to block pings by entering an ACL rule to specifically deny icmp, but I would like to deny all except http.
Any advice on how to achieve this appreciated.
William.
Hello
Guess that's what you're looking for. See the Bidirectional VPN filter configuration section.
-
I have a disabled friend who I am hand. It was given to a second-hand machine from Dell with genuine XP Professional is installed. The license product key is on the side of the machine. Unfortunately, the operating system has been damaged while the machine does not connect to the internet, so I can not download from Microsoft. I did a recovery CD for Windows XP Home Edition from my PC at home. I create a new partition on his PC and retrieve XP Home Edition to him. When this is done the processw ask the product key. My question is: the key on the side of the machine will work with XP Home Edition?
Thank you
See: How to order backup discs Dell
Carey Frisch
-
How can I upgrade Windows Vista home Windows 10
How can I upgrade Windows Vista home Windows 10
Hello
You buy Windows 10, as there is no free upgrade to Vista 10.
Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.
http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/
How to buy Windows 10:
http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700
But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.
https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs
" System requirements Windows 10"
https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements
Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015
"FAQ Windows 10.
http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ
See you soon.
-
How to get a windows Vista Home Premium 32-bit installation disc?
My computer is an emachine T5086. It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.
Then, the computer restarts and asks me to install my windows installation disc for repairs. F8 on reboot is not available as an option. I don't have a repair option I turn on the computer and hold down the F8 key manually. I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.
How to make a windows Vista Home Premium 32-bit installation disk? I have my product key. Or where can I get one?
Hello
There are different methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.
They should do this for a small fee.
http://www.eMachines.com/EC/en/us/content/home
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Inferno of football how to remove it of Sista home premium 32
Inferno of football how to remove it of Sista home premium 32
Directly from the webpage home of Soccer inferno.
http://support.mindspark.com/customer/portal/articles/82251-uninstalling-your-toolbar
-
Need of the ACL kung fu for VPN from Site to Site ACL problem
Group,
Have a little problem I know is related to ACL. I wanted to have a few experts to take a look at my config please. Here's the question:
Attempt to create a site between two offices, but for some reason any that they cannot ping each other. It is a strange thing.
97.XX.231.22 <-->71.xx.160.123
I can ping both firewalls from the outside using a computer to another, but from the internal firewall utilities, they cannot ping each other. At the same time I can ping to their respective gateways.
Secondly, I did an interior outside translation as you can see here for 80 & 443 preventing me from browsing http and https via VPN for Remote LAN, can it be modified to allow access? I can access when I dial in via VPN client but not via permanent VPN tunnel. Here is the config.
no ip nat service sip 5060 udp port
IP nat inside source map route SDM_RMAP_1 interface GigabitEthernet0/0 overload
IP nat inside source static tcp 10.41.14.103 80 71.xx.160.123 80 extensible
IP nat inside source static tcp 10.41.14.103 71.xx.160.123 expandable 443 443
IP route 0.0.0.0 0.0.0.0 71.xx.160.121
IP route 10.67.188.32 255.255.255.224 10.41.14.99 6 permanent
IP route 10.67.188.96 255.255.255.224 10.41.14.99 8 permanent
IP route 10.200.107.0 255.255.255.0 10.41.14.99 9 permanent
IP route 10.200.110.0 255.255.254.0 10.41.14.99 7 permanent
IP route 74.200.107.0 255.255.255.0 10.41.14.99 5 permanent
IP route 74.200.110.0 255.255.254.0 10.41.14.99 4 permanent
IP route 208.67.188.32 255.255.255.224 10.41.14.99 2 Permanent
IP route 208.67.188.96 255.255.255.224 10.41.14.99 3 permanent
!
auto discovering IP sla
Logging trap errors
host 192.168.10.29 record
access-list 2 Note HTTP access class
Note access-list category 2 CCP_ACL = 1
Note access-list 2 Platinum LAN
access-list 2 permit 10.41.14.0 0.0.0.255
access-list 2 refuse any
Access-list 101 remark rules Master
Note access-list 101 category CCP_ACL = 1
Note access-list 101 FaxFinder WWW traffic
access-list 101 permit tcp any host 71.xx.160.123 eq www
Note access-list 101 traffic HTTPS FaxFinder
access-list 101 permit tcp any host 71.xx.160.123 eq 443
Note access-list 101 NTP Time Protocol
access-list 101 permit udp any host 71.xx.160.123 eq ntp
Access-list 101 remark IPSEC protocols
access-list 101 permit udp any host 71.xx.160.123 eq non500-isakmp
Access-list 101 remark IPSEC protocols
access-list 101 permit udp any host 71.xx.160.123 eq isakmp
Note access-list 101 traffic ESP
access-list 101 permit esp any host 71.xx.160.123
Note the access list 101 General License
access list 101 ip allow a whole
Note access-list 102 CCP_ACL category = 2
access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255
Note access-list 102 IPSec rule
access-list 102 deny ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255
Note access-list 102 IPSec rule
access-list 102 deny ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31
Access-list 102 remark Platinum LAN NAT rule
access-list 102 permit ip 10.41.14.0 0.0.0.255 any
Note category from the list of access-104 = 4 CCP_ACL
Note access-list 104 IPSec rule
access-list 104. allow ip 10.41.14.0 0.0.0.255 192.168.10.0 0.0.0.31
Note access-list 108 CCP_ACL category = 4
access-list 108 allow ip 10.41.14.0 0.0.0.255 any
Note access-list 109 IPSec rule
Note access-list 109 CCP_ACL category = 4
access-list 109 allow ip 10.41.14.0 0.0.0.255 192.168.76.0 0.0.0.255
Note access-list 110 CCP_ACL category = 4
Note access-list 110 IPSec rule
access-list 110 permit ip 10.41.14.0 0.0.0.255 10.0.2.0 0.0.0.255
not run cdp
!
allowed SDM_RMAP_1 1 route map
corresponds to the IP 102
There is more then one way how you can achieve this goal.
(1) the best way is possible if the two VPN counterparts are IOS routers. Then you can migrate to virtual VPN - tunnel interfaces (VTI). With this, the external interface doesn't mix - and non-VPN-traffic VPN.-->
(2) if VTI is not possible, you can restrict the translation to only non - VPN traffic using a roadmap:
object-group network RFC1918
10.0.0.0 255.0.0.0
172.16.0.0 255.240.0.0
192.168.0.0 255.255.0.0
NAT-SERVER - 10.41.14.103 allowed 10 route map
corresponds to the TRAFFIC-NAT-SERVER IP - 10.41.14.103
TRAFFIC-NAT-SERVER extended IP access list - 10.41.14.103
deny ip host 10.41.14.103 object-group RFC1918
permit tcp host 10.41.14.103 eq 80 a
allow a host EQ 10.41.14.103 tcp 443
IP nat inside source static 10.41.14.103 71.xx... map route NAT-SERVER - 10.41.14.103
What makes that?
When your server communicates with a system with an address in the range RFC1918, then the road map does not correspond and the translation is not used. It is you, the VPN scenario. But if the server communicates with a non-RFC1918 address, then the translation is used and the server can be reached.
--
Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni -
NAT-XLATE-FAILURE on the VPN from Site to site connection.
I had configured a VPN of Site to new site on my network, once I created Tunnel appears, but there is no traffic when I made trace packet its gave me error "(NAT-XLATE-FAILED), NAT has failed."
Here is the configuration runing.
ASA 9.1 Version 2
!
ciscoasa hostname
activate 2KFQnbNIdI.2KYOU encrypted password
names of
IP local pool kecdr 10.100.1.1 - 10.100.1.50 mask 255.255.255.0
local pool KECVPN 10.2.1.200 - 10.2.1.225 255.255.255.0 IP mask
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 168.187.199.66 255.255.255.252
!
interface GigabitEthernet0/1
nameif inside
security-level 100
10.2.1.1 IP address 255.255.255.0
!
interface GigabitEthernet0/2
nameif DMZ
security-level 50
IP 10.60.1.2 255.255.255.0
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
management of the DNS domain-lookup service
DNS server-group DefaultDNS
Name-Server 8.8.8.8
permit same-security-traffic intra-interface
network of the NETWORK_OBJ_10.100.1.0_26 object
255.255.255.192 subnet 10.100.1.0
network of the NETWORK_OBJ_10.2.1.192_26 object
255.255.255.192 subnet 10.2.1.192
network of the NETWORK_OBJ_10.13.0.0 object
Home 10.13.0.0
network of the NETWORK_OBJ_10.2.0.0 object
host 10.2.0.0
network of the NETWORK_OBJ_10.3.0.0 object
Home 10.3.0.0
the DM_INLINE_NETWORK_1 object-group network
host object-network 10.2.0.0
object-network 10.60.1.0 255.255.255.0
inside_access_in list extended access permitted ip any4 any4
inside_access_in list of allowed ip extended access all 10.60.1.0 255.255.255.0
outside_access_in list extended access permitted ip any4 any4
allow global_access to access extensive ip list a whole
DMZ_access_in of access allowed any ip an extended list
DMZ_access_in list extended access permit ip any interface inside
outside_cryptomap list extended access allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
permit access ip host 10.2.0.0 extended list outside_cryptomap_1 10.11.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
MTU 1500 DMZ
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any response echo inside
ICMP allow any echo inside
ICMP allow all DMZ
ICMP allow any echo DMZ
ICMP allow any response to echo DMZ
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.2.1.192_26 NETWORK_OBJ_10.2.1.192_26 non-proxy-arp-search to itinerary
NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.100.1.0_26 NETWORK_OBJ_10.100.1.0_26 non-proxy-arp-search to itinerary
NAT (inside DMZ) static source a whole
NAT (inside, outside) static source NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.2.0.0 NETWORK_OBJ_10.13.0.0 NETWORK_OBJ_10.13.0.0 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!
NAT source auto after (indoor, outdoor) dynamic one interface
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Access-group DMZ_access_in in DMZ interface
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 168.187.199.65 1
Route DMZ 10.1.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.2.0.0 255.255.0.0 10.60.1.1 1
Route DMZ 10.60.0.0 255.255.0.0 10.60.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
http 10.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_cryptomap
card crypto outside_map 1 set pfs Group1
peer set card crypto outside_map 1 196.219.202.197
card crypto outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 2 match address outside_cryptomap_1
peer set card crypto outside_map 2 185.52.118.67
card crypto outside_map 2 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
trustpool crypto ca policy
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 0.0.0.0 0.0.0.0 outdoors
Telnet 10.0.0.0 255.0.0.0 inside
Telnet 10.2.0.0 255.255.0.0 inside
Telnet 10.1.0.0 255.255.0.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 10.0.0.0 255.0.0.0 inside
SSH 10.2.0.0 255.255.0.0 inside
SSH 10.1.0.0 255.255.0.0 inside
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
internal GroupPolicy_185.52.118.67 group strategy
attributes of Group Policy GroupPolicy_185.52.118.67
Ikev1 VPN-tunnel-Protocol
internal GroupPolicy_196.219.202.197 group strategy
attributes of Group Policy GroupPolicy_196.219.202.197
Ikev1 VPN-tunnel-Protocol
internal kecdr group policy
attributes of the strategy of group kecdr
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECCISCO group policy
KECCISCO group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
internal KECVPN group policy
KECVPN group policy attributes
value of server DNS 8.8.8.8
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
username, password admin eY/fQXw7Ure8Qrz7 encrypted privilege 15
cisco 3USUcOPFUiMCO4Jk encrypted password username
username privilege 15 encrypted password 3ofqMXhysxFRHhoQ keccisco
type tunnel-group kecdr remote access
tunnel-group kecdr General-attributes
address kecdr pool
Group Policy - by default-kecdr
kecdr group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group KECVPN remote access
attributes global-tunnel-group KECVPN
address kecdr pool
Group Policy - by default-KECVPN
IPSec-attributes tunnel-group KECVPN
IKEv1 pre-shared-key *.
type tunnel-group KECCISCO remote access
attributes global-tunnel-group KECCISCO
address KECVPN pool
Group Policy - by default-KECCISCO
IPSec-attributes tunnel-group KECCISCO
IKEv1 pre-shared-key *.
tunnel-group 196.219.202.197 type ipsec-l2l
tunnel-group 196.219.202.197 General-attributes
Group - default policy - GroupPolicy_196.219.202.197
IPSec-attributes tunnel-group 196.219.202.197
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
tunnel-group 185.52.118.67 type ipsec-l2l
tunnel-group 185.52.118.67 General-attributes
Group - default policy - GroupPolicy_185.52.118.67
IPSec-attributes tunnel-group 185.52.118.67
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
HPM topN enable
Cryptochecksum:8156993fef96da73dedfaacd7a14e767
: endMy local IP address: 10.2.X.X
My remote IP address: 10.3.X.X
Can anyone support me for the error
Hello
Your self after dynamic PAT takes the static NAT...
NAT source auto after (indoor, outdoor) dynamic one interface
You must reconfigure you NAT or PAT rule defined in your firewall.
no nat source auto after (indoor, outdoor) dynamic one interface
network local-lan-pat1 object
10.2.0.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
network local-lan-pat2 object
10.60.1.0 subnet 255.255.255.0
NAT dynamic interface (indoor, outdoor)
!
no nat source (indoor, outdoor) public static DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.3.0.0 NETWORK_OBJ_10.3.0.0 non-proxy-arp-search of route static destination
!outside_cryptomap to access extended list ip 10.2.0.0 allow 255.255.255.0 host 10.3.0.0 255.255.255.0
No list of extended outside_cryptomap access not allowed host ip DM_INLINE_NETWORK_1 10.3.0.0 object-group
!
We hope that you do this between subnets... not for the host at the other end.
Concerning
Knockaert
-
How can I change a Public home network in Windows 7 Hompe Prermium
My question is this. I have the E4200 of Cisco router that I add to my network. I configured the router and can access via the wireless. However, if I connect the computer to the Ethernet port it shows as a connection to the local network, but it is listed as unknown network and his game to the public. This prevents me from access routers layout on the cable network. How can I change this public network at home so I can access it?
Hi Ldroamer,
Here is the procedure to follow change the network location on your Windows 7 computer. Follow the below section to change your public home network configuration.Hope this helps you. Let us know anyway! -
All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer. I deleted Firefox and re-installed but the rest of the problem. Help, please.
Well, it's a problem in your Firefox. To me this https://www.yahoo.com/ page looks like the screenshot of IE.
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:- Click the menu button
, choose historic, then on clear recent history...
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
- Click the menu button
-
How downgrade from Captain el mountain Lion
How downgrade from Captain el mountain Lion
Hello. Visit this link:
Maybe you are looking for
-
Power button on iPhone 6s more not clicking
iPhone 6s more button / stop is not clicking on like volume level (no comments)
-
Can't see the network of cult film - game is saved.
When I select 'The Cult Movie Network' and try to stream to my Bravia-3 from TV, I get "Please visit Web of Sony Essentials to associate your device with our service." My TV has been recorded for a long time and does not display ' Registration Code:
-
I have no error in the eventlog (s)When I boot with /SOS 1.9 GB is reported
-
How to remove Windows Live Messenger sign in box?
I have windows 7 (64-bit) and every time I start the computer I get the sign in the box open and I don't want it. I checked msconfig and unchecked returned a few programs Windows Live and it worked for a startup, then the pop up. When I checked the c
-
my printer hp photosmart 7510 will not print text
I installed a new printer cartridges and now my printer does not print any text, but test pages show the color bars and text boxes, but no word at all. It worked perfectly until I changed the cartridges. Any suggestions?