Can't see the network of cult film - game is saved.

Similar Questions

• WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

  I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

  Firewalls are disabled on remote computers?

• Can't see the network hpsetup on my Macbook Pro on a C4780

  Help - I'm trying to get working wirelessly on a C4780 connected to a new Macbook Pro with 10.6.2.  I am on a network of wireless-G linksys with WPA_PSK and when the HP configuration utility try to connect to my network, it goes into "the network... search. "forever.  So, I tried to connect manually by some of the other posts, but I can't find the network hpsetup even after resetting to the default printer.  The serial number of the printer is CN99SD12ZF.  Is that printers with factory default SSID settings incorrect?  If so, what I try next?

  Some sent C47xx factory printers have an incorrect default setting in their non-volatile memory that prevents the method of ad-hoc configuration.  There is nothing wrong with the printer HW or FW and you should still be able to set up the printer using the Setup program on the CD.

  If necessary, it is a manual method to get the printer on your network.  Here's how to printers wireless C47xx:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  • Press the Scan button to get the wireless settings
  • Select wireless Menu
  • Select wireless settings
  • Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks and then Showall the bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  In the Web page of the printer, click Networking , and then select Wireless (802.11().  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• Can't see the network PC MAC computer, unless I have use RUN in the start menu and type in the IP address.

  Original title: MAC to PC NETWORKING.

  I added my Mac to my PC network workgroup.  I can see the PC from my Mac, but not my Mac to the PC network puts unless I have use RUN in the start menu and type in the IP address. I am running XP Pro SP3.

  Hi markymo777,

  I suggest you to check if you can see the MAC computer with the UNC path - \\computername\sharename. Later, check to see if the problem persists.

  Hope the helps of information.
  Please post back and we do know.

• Can't see the networks without wire in Dell Inspiron

  I have just moved house (previously in the United Kingdom, in Australia) and now I can't get my Dell Inspiron 1525 to find (Vista 31 bits operating system) wireless networks. Under network and sharing Center, if I click on connect to a network or setting up a connection or network, nothing happens. Similarly, under Manage Wireless Networks if I select add nothing happens. However, if I select the Dell Wireless WLAN Card Utility I see my network wireless on the Site tab. Also, I can see and connect to the network wirelessly to other devices (for example the iTouch).

  Hi dellUser_742

  Please refer to the below links and check if the steps to help you resolve the issue.

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  I hope this helps.

• Re-installed Windows XP and now I can't see the network connections and cannot get online.

  Our pc is down a few days ago, so we reinstalled xp.  The xp upgrade.  Now, we show no internet connection and can not get on the net.  Our Device Manager indicates a problem with the drivers being not downloaded on the network adapters.  Also the modem is not recognized when I try to connect. I tried to download the fix for me on microsoft for a flash player and it did not work.  Can you please help me reinstall it?  Thank you

  original title: reinstalling Windows XP

  Go to your computer manufacturer's support web site and search for the Windows XP drivers for your specific model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and install them all, starting with the card mother/chipset drivers, LAN, Audio, USB, SATA, etc, and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Created in Esxi virtual MACHINE can't see the network

  Hello

  I installed Esxi 5.5 and I have no problem to access and create a virtual machine.

  However, the virtual machine, which is 2012 Windows, does not begin with a network adapter.

  When I check the configuration of the VM, the network adapter is connected, turned on, E1000E but says directpath e/s is not supported. I don't have VMware tools installed in the virtual machine.

  I don't understand where the problem lies. I connect to Esxi ok. I can run the virtual machine in Esxi client ok, but the images says that there is no network.

  I created the VM Windows before 2012, outside of Esxi and the network built in card is detected ok.

  STOP PRESS - in computer management Windows, peripheral, the Ethernet controller is not recognized. So, how can I get the virtual machine to recognize when it is running in ESXI?

  Help?

  Thank you

  Jason

  Also can you check with adapter VMXNET or tru uninstalling and reinstalling VMware tools.

  -f10

  http://highoncloud.blogspot.in

  Virtualization VMware on NetApp

• can't see the cursor or pointer in game mode, why?

  When you play the online Agenda with vista, the game starts and requires clicking the box pop up, but I don't see the cursor or pointer to click at the right place. How can I fix this, please help?

  Hello

  1. have you made changes on the computer before this problem?

  2. what web browser are you using to play the game online?

  3. what version of IE are you using? (If it is Internet Explorer)

  4. what online game you try to play?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you use Internet Explorer, and then try the steps in the following Microsoft article and check if it helps.

  The problems of games online using Internet Explorer:

  http://support.Microsoft.com/kb/2528246

  Method 2:

  Try to update the display driver and check if it helps.

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope the information is useful.

• Can't see the network after 6.5.5 to 8.0 upgrade

  I have a couple of virtual machines that are running at the same time and talk to each other as well as with the host operating system.

  Since the upgrade to 8.0 I can no longer ping or join other machines or the host operating system.  I have not changed the settings since the upgrade.  Two virtual computers have IP addresses static of 192.168.0.123 and 124 respectively.   The gateway is 192.168.0.100.   No machine can ping each other, or the front door.

  Has anyone else seen elsewhere?   I'm completely dead in the water.

  See you soon

  Automatic bypass is not working properly, so select a specific host for VMnet0 NIC in the virtual network Editor.

• VMKernel can not see the network...

  I have 4 NICs, 2 NICs service a vswitch with a service console and VMkernel a.   The service IP console works fine but I have no network connectivity for the VMkernel on the same vswitch with a static IP address.  If I set the VMkernel for DHCP, it gets an address of 169.x.  esxcfg-switch - l & esxcfg-NICS - l show no problem.

  Hello

  It seems the two network adapters that you use with that one VLAN configured on the pSwitch.

  • Try to configure vSwitch with a single NETWORK card, which saw Service Console PortGroup and confirm the S.C having connectivity

  • UN-Link the NIC of the vSwitch and add the second NETWORK card and confirm the S.C with connectivity.

  If you have a connectivity on both network adapters, and then in the pSwitch problem seems to be.

  • Troubleshooting above with VMKernel PortGroup and confirm - there is connectivity to the other host via the vmkping command.

  • If doesn't work then be sure to there is a circuit in the pSwitch or not.

  • If you have chutes, make sure the tag pSwitch Port.

  • Put the VLAN ID in the VMKernel PortGroup.

  • Put the VLAN ID in the Service Console PortGroup

  If you are not sure, connect two VMKernel network cards to a crossover cable and try the connectivity tests.

  Best regards

  Hussain Al Sayed

  If you find this information useful, please give points to "correct" or "useful".

• Tecra Z50 - A can't see the mobile broadband network

  8.1 Windows does not recognize the Sierra LTE mobile braodband on my Tecra Z50.-a.
  There is no software on the Toshiba support site. Observer of Sierra drivers or AirCard.

  He can't see the material in my equipment manager.
  Can't see the mobile broadband in the network domain.

  Need help!

  Thx a lot

  Can you please send full model of your laptop Tecra name?
  By the way: do you use the original pre-installed OS that you got with your laptop?

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• Can not see the plan network and Control Panel

  Windows 7 64 bit, I can't show my control panel.  The window does not load.  First of all, I had trouble with page load network and Internet.  Now it crashes when I try to open it.  My most recent change was the installation of a new firewall.  I just wanted to see if I should add anything whatsoever to the title of the secure networks.

  I can now display the network map.  After the installation of the station, I stopped and restarted.  The system should have distinguished between that and a reboot.  Thank you.

• My guest can not see the host or cannot communicate with the network, networking is set to bridged, host operating system is Windows XP sp3

  Hello from Spain,

  I am running vmware workstation 6.0.2 on a windows xp sp3 with two virtual machines, a xp and a windows 2003 Enterprise edition. Non of my guests can't see the computer host or other computers on the LAN and host when I click on show "Entire network", "Microsoft Windows network" I see that the domain for which the guests but not the domain controller when I double click the icon of the domain. Networking is set to connected by a bridge to the NETWORK adapter connected to the LAN.

  Thank you.

  Hello

  No message in the post

  route print at the command prompt to the host and the guest and send report

  Prakash

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon