HP 10 G2: Battery charger takes a day to load, why?

Similar Questions

• Palm Pre... Battery life? Can not stay charged for a day!

  For those of you who have the new Palm Pre... Please tell me how you keep your battery charged without it coming down from 100% at the beginning of the day to 30% of 15:00!  How are we supposed to use the Pre if allows you to ensure that autonomy will support all throughout any given day?

  Too inconvenient to have plugged a place just to get a load!

  Help!

  Hey GadgetGurl,
  Check out the post that we have in my signature that has a long list of tips to keep your battery alive longer!

  Simply click on the link below...

• Changing the setting of 80% to 100% on the Satellite Z30-A-104 battery charging

  Hello

  I used my Z30 Satellite primarily as a desktop till now (the charger is still plugged).
  One day I got a popup option to increase the life of the battery (charge only up to 80%) and I accepted the option.

  But now, I'll be traveling and can't reset this option.

  I want to charge the battery to 100% and be able to take advantage of longer battery life.
  How is that possible? Help!

  See you soon
  Vivek

  Hello

  I think that you have changed this setting in battery Toshiba Manager c++.
  You must disable Mode "Eco-responsible".

  Perhaps this Toshiba info would be useful:
  [TOSHIBA Eco Mode ECO CHARGE MODE charge | http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Eco-Charge-Mode/ta-p/355376]

• Questions about Satellite P200D battery charging

  Hi all
  I bought my satellite in March 2008, and after some initial problems with the result having replaced, I have finally been sorted and have had very few problems since. However, in recent days, this is all changed. My battery is now practically refusing to load and run not power off. At the moment its operation off power supply and load, but for the past hour its been hurtling battery.

  What going on it when I plug in the AC adapter, the light making goes blue and seeing power begins blue and flashing orange (constantly between the two colors) and the battery light flashes orange. The HARD drive light is also blue.

  I don't know if the problem is the battery or another problem with the power actually do to the computer. The fact that it fits as being plugged in all time leads me to believe that the power adapter is not the issue, while its battery not wanting to take new service charges, or another issue with the laptop not properly in the face of the power to be.

  Someone at - it ideas? I scoured google and have not been able to find anything on this problem. I bought the laptop through Curry, but I don't want to pay a pound and a half a minute to talk to The Tech Guys, when they most likely wasting time asking me if I rebooted it.

  Looks like there could be a hardware problem. Take it to an ASP for warranty repair.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• Help with Apple battery charger?

  Because of my Apple Magic mouse, which need spare batteries, at least once every 25 days and my Belkin YourType keyboard requiring spare batteries every day, I bought the Apple Best Buy battery charger as it offers is more the Apple store online. How will I know when the device is finished loading? Best Buy reviewers talk about a sense of light orange blinking battery is defective. I can't say when the charger is finished loading. No it fires? He flashes? It emits beep? Best shopping site only mentions that it reduces the amount of energy it draws when it finishes loading. I want to know when it is finished loading. Everyone go through Duracell batteries in their Magic Mouse in less than 25 days?

  Hello Rebekah

  I used a charger Apple in recent years.   Plugged in to the mains and batteries, the charger will immediately return orrange and will stay like that until the batteries are completely charged.   At this time there the little light turns green and the battery themselvesz will feel warm to the touch.   When they are charged fees to be held for a few weeks, is slowly diminishing.   As the batteries cool, the light turns off, but the batteries themselves will remain loaded.   Use a battery as a final control power indicator.

  If you don't get an orange at first, chances are your batteries are not long enough to complete the + and - sign.   Real Duracell rarely have this problem.   Evade about to see if it makes a difference, but don't be tempted to use aluminum foil packing to compensate for the length; test another battery.

• Battery charge R200 options?

  I can't find a setting on my R200 where I can turn the battery charging when wallconnector is in. Batterylife should be longer if she wouldn charge every day. It s it souch options on my R200?

  Hello

  There's NO other way. If the battery is placed in the laptop and you use the AC adapter as well as the battery will be charged.
  You must always remove the battery if you work with the main power supply, because the procedure of permanent load is not good for the duration of battery life

• Satellite C650 problem battery charge.

  Hello

  I have a problem with my charge battery.
  Windows system sees the battery and shows that the power supply is connected, but it also gives the message that the battery is not supported.

  Led indicating that the battery is charging does not illuminate. In order to charge my battery I have to disable notebook, unplugged my power supply, remove the battery and place it again once and after that my battery is being charged.

  My question is what is the problem?
  Would be - this defect battery or motherboard?

  Thanks for your help
  SzAkaL

  > My question is what is the problem?
  > Could it be the battery or the failure of the motherboard?

  Hard to say. First of all I recommend you check the version of the BIOS.
  Do not forget that your BIOS is up to date.

  But have you noticed this problem since the first day of use?
  Theoretically, the battery must be detected even if the battery is dead so I m wondering why the battery led is not ON. If the battery could be charged, the indicator must light up orange. If the battery is fully charged, the indicator should switch to blue.

  In any case, I think that you cannot run a few test because you don t have important and necessary tools, I think that the new battery should be tested with Notepad and if this would not solve the problem, the motherboard must be tested also.

• Good battery charge for laptop to HP 15-D014tu Intel i3 - 3110M

  Hi, I know that this subject has been discussed and there is a lot of information online about this but he simply left me confused.  My question is what is the correct way to the battery of my new book of charge/discharge.  I have load to 100% and then remove the charger and let run to 40 or 50% then reconnect it and then recharge to 100% or, say, 80% (as I read online?)  and here again, remove the charger and let it carry out 40 or 50%?  If this is the case, it seems that I do that all day long (out magazine & back).  Is it a good idea to leave the charger plugged?  I noticed (leaving the charger in) the computer 100% and there remains (said always fully charged 100%) - the old laptop I used would say 90 something % and not charging but this laptop does not seem to do this?  Any help is much appreciated, thank you.

  Hello

  New smart charger and smart battery will stop when 100% full. Battery has life, according to the number of cycles (and usage) of load. Sellers quote normally 300 cycles (that's why 1 year warranty). Several batteries will live more than 300 cycles, only to cut capacity. I did a full test for exactly two machines (Dell E4310). One was sitting on a docking station all day, every day, and the second which was not sitting on a docking station. After a year, those who stood on the docking station maintained power over the other. I'll find the results and display the numbers a day.

  Kind regards.

• Battery charging - effect on the battery life

  So, the battery life is not initially as low as feared but rarely fits a model of exactly 24/48 hours, so I often need to recharge the battery.

  Formerly, it was bad for the batteries, but my question is - are there - there no damage to the battery caused by the overflow of the load for 30-60 minutes when it's convenient?

  Thanks in advance.

  Hi Dave

  The battery won't suffer regular refills made wrong, regardless of the level of load when the load begins. Apple Watch uses Lithium-ion batteries, which can be charged whenever you want. There is no need to let the battery discharge completely before recharging.

  You can find more convenient to charge your watch from one day to the next. In normal operation, Apple Watch cannot be overloaded, and the battery won't suffer harm of regular refills done every day. Load stops automatically when the watch is fully charged (and again as / when required due to the use of the current battery). Follow Apple's safety and handling instructions, and note also that:

  -It is not possible to turn the watch off the coast while it is on the charger and connected to the power supply - what is normal.

  -It is also normal to watch, adapter sector and charger become hot when it is connected to the power.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• kernel_task and temperature of close to battery charger problem

  Hello

  I have a Macbook Pro 13 "2011 with El Capitan (10.11.1) start installed.

  Some time ago I started to have problems with the device. KernelTask would go up to several hundred or even thousands would rise percent utilization of the CPU and fans. It seems to be a workaround, as described here:

  948 http://forums.macrumors.com/threads/How-to-solve-kernel_task-High-CPU-usage.1706.

  I quote from this thread:

  ' 1. go about this mac under the Apple in the top left and then click more information.

  2. click on the system report

  3. take note of what he said after the model identifier

  4. go in your master drive - system - library-Extensions - IOPlatformPluginFamily.kext - table of contents - Plugins - ACPI_SMC_PlatformPlugin.kext - content - resources - find the name in step 3 and move it to a folder that you can find again if needed.

  3. reboot and you're done.

  I did this and the Macbook is still usable. But the fans are very high, the majority of the time and it's always a bit slow.

  I used a program to see the temperatures, the sensors detect. Everything seems normal except "proximity to battery charger": 127 ° C!

  Anyone know what this means and what we can do about it?

  Consider the possibility of a conflict of third party software.  You can get an idea of what is running on your computer via EtreCheck.

• T440p windows 10 battery charge mode

  Hi all

  I had a recently updated T440p to level to win10pro win7pro. Among other things, the most annoying is the battery charge mode: I put it in "custom load thresholdd", between 55% and 85%. Instead, each time you start the battery starts to load and I have to go to PowerManager8 and change the setting to custom. Then everything is going ok until the next start-up, where I have to do the same thing...

  The notification on my antivirus is the second most annoying: I forticlient antivirus (the latest version, updated to work with win10 ok) running without problem, but in each boot win10 informs me that forticlient is disabled and keeps telling me the same every now and then... I've already put the Panel I want info on the antivirus, but win10 seems that does not understand this...

  Any help will be welcomed.

  Thank you, guys!

  Hi x220forme and thanks for the welcome!

  I found a 'strange' way of trying to solve my problem: I have read in this forum about someone else whom the battery was not charged as it should, and the notice was "try to degrade your power managememnt driver and power manager.

  So I thought ' why not? ' and the last 36 hours, I installed Power Management Driver 1.67.03 and Power Manager 6.67 (with windows 10 Pro in a T440p).

  Until now, looks like it works well. After many restarts, my battery is at 85% and fails to demand, as he has done with PM8. I'll wait a few more days and let the community know, in case where someone else facing the same problem.

  Thanks again!

• Battery charger gets hot

  Is it normal that my battery charger extremely hot when it is in use? I'm afraid each leave only it connected so I'm not nearby because I'm afraid he's going to fry or ignite. I just bought this computer 2 months ago.

  Normal use a charger / adapter will get very hot, but they should not become extremely hot. I would recommend that you contact the Lenovo Support for further assistance.

  Lenovo - United States support

  1-877-453-6686
  24 hours a day 7 days a week

• X120e Battery Charge problem

  Hello

  I bought my x120e about a month ago and it's been great since, but recently I had problems with the battery. When I charge the battery to 100% and then unplug the power adapter, the battery is fine for an hour or two, and load will decrease to a normal and regular rhythm (indicated by the percentage). However, when the battery is at 75-80%, then he jumps abruptly up to 10%, and I get a message that I have to charge the cell phone or turn it off. When I connect and start loading again, the battery charges at a normal speed of about 10 to 40%, but the same thing happens and it jumps up to 100%, saying it is fully charged. Generally, I would be happy with such a fast charge, but in this case the battery is not really full as soon, he dies suddenly after that I have unplug the adapter. Even if I let it continue loading at 100%, the same thing happens.

  So, I was wondering if I could do something to fix this on my own, or if I should send it just come back on the one year warranty. Please tell me if I did not know by describing the problem and thanks for any help/suggestions!

  I just wanted to post an update. I thought that my explanation of my problem of battery gave a negative perception of the ThinkPad x120e and lenovo in general, but I called the customer service of lenovo today and after 15 minutes, the representative has verified the problem (battery was indeed defective) and sent a new battery in my house. Overall, I am very satisfied, and I think that this problem of battery was only an isolated case. The battery is supposed to come in 2 days!

• Need power supply/cord for battery charger CB-2LYE for powershot SX710. Suggestions?

  Buy powershot foreign SX710. Power cord that attaches to the bateery charger does not catch US. Where can I buy just the power cord (and what he calls really? my research do not work...)

  You can get the charger all this and the cord for about 15 euros with free shipping or less on the auction sites. I doubt that a cord will be much less but if you really want one then you will need to measure the length width depth and take note of the curves and look for electronic like DigiKey or YouDoIt or allied or other suppliers. Radio Shack maybe.

  Terms such as the power cord, power cord, power cord AC power might work

  Or for $ 15:

  http://www.batteryheads.com/Canon-CB-2LY-digital-camera-travel-battery-charger?gclid=CO_T_cziy8sCFVg...