T440p windows 10 battery charge mode

Similar Questions

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• Windows 7 adjustable threshold less than 100% of the battery charge?

  Hello.

  I have a Clevo P170HMx which is a cell phone game impressive.

  Probably the only thing I don't like is that my battery is always 100%.  I used my laptop plugged into an electrical outlet.

  and knowing that to have my battery to 100% and always load will destroy the battery life.

  My previous laptop was an IBM Thinkpad, and it had a maximize battery gauge allows you to define the allowed charge batery

  threshold.  I got this game to start the load to 15% and stop loading at 20%.  I had this same battery from the time of purchase

  until 4 years later, I got my new laptop, the battery remained in excellent condition with load capacity full not escape

  as do other batteries when they stay at 100% and reload constantly.

  Is it possible on Windows 7 pro to change the threshold of battery charge to stop less than 100% load to save battery life

  life?  Or is it Windows software available for download that will make this recommended?

  If Windows 7 is not able to do this, I would say something in an update service pack or the next version of Windows.

  Thanks a lot for your help.

  See you soon...

  Hello

  In normal circumstances as soon as the lithium-ion battery is full, a properly functioning charger will stop the charge and will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe.

  The latest Lithium-ion batterires have a limited number of Discharg/charge cycles.

  You can create a detailed report on the State of the battery to double check the battery status.

  1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

  2 in the command prompt window, copy / paste the following command.

  powercfg-energy-output %userprofile%\desktop\energy-report.html

  Press ENTER.

  Wait for the command to complete (usually about 2 minutes).

  This create a file named energy - report.html and place it on your desktop.

  3 go to your desktop and double-click the file to open.

  Scroll to the bottom for the battery: battery information section.

  You will see:

  Rated xxxxx

  Xxxxx full last Charge

  (Where xxxxx is a number)

  4 to calculate the amount of full Charge capacity left in the battery split the value of the last Charge full rated capacity and multiply by 100.

  For this example , use the following numbers.

  Nominal capacity 4400

  Last full 2937

  Calculator enter 2937 and divide by 4400.

  Multiply the multipliez le resultat result by 100 , then press =.

  The result will be 66,75

  This means you have 66,75% of the nominal capacity of the battery.

  Tell us what you find.

  Concerning

• Windows 8 - cell phone battery charge

  Original title: Hoverwolf1

  How can I change the way my laptop recharges the battery? The entire Bill, he falls over a period of time until she has to be reloaded, but to charge, he must be stopped. During the initial installation of the system, there is an option to have continuous or intermittent load load, but I find that to change in power settings. Anyone have any ideas?

  Hello

  The true answer will likely support system manufacturer, their
  online documentation and ask questions in the forums (if any) on known problems
  and solutions. Automatically search for updates the BIOS and chipset drivers.

  Check these:

  Battery: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/battery-meter-frequently-asked-questions

  Tips to save battery
  http://Windows.Microsoft.com/en-us/Windows-8/tips-save-battery-power

  Power plans: frequently asked questions<- be="" sure="" you="" are="" using="" power="" saver="">
  longer battery life.
  http://Windows.Microsoft.com/en-us/Windows-8/power-plans-FAQ

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• ECO Charge mode can not be disabled on Satellite P50 - A under Win 10

  I had Windows 8.1 on my P50 - A Satellite.

  With the eco-utility, I activated the eco charge mode and my charges one battery at 80%. A month ago, I've upgraded to Windows 10, threshold 2
  Now I need my laptop often for mobile use and I need the full 100% of battery.

  But the Eco Utility no longer works.
  I downloaded the latest version of the utility eco for Windows 10 drivers Toshiba support.

  It works but there is no mode of environmental load! It still seems that on windows 8.1 but Eco charge mode is missing.
  Has anyone have the same problem?

  Any sugggestions to solve?

  Thanks in advance for your efforts

  I had Windows 8.1 on my P50 - A Satellite.
  With the eco-utility, I activated the eco charge mode and my charges one battery at 80%. So good.

  But then, a month ago I have upgraded to Windows 10.
  Now I need my laptop often for mobile use and I need the full 100% of battery, so I tried to load eco mode off.
  But the Eco Utility no longer works.
  I downloaded the latest version of the utility eco for Windows 10 drivers Toshiba support.

  It works but there is no mode of environmental load! It still seems that on windows 8.1 but Eco charge mode is missing.
  Has anyone have the same problem?

  Any sugggestions to solve?

  Thanks in advance for your efforts

• Battery charge disable Lenovo Z500

  Hi all

  I recently got the Z500, working under Windows 8.

  I have a question about the battery charge. I'm working on the laptop for long periods of time with the power supply connected. Because it is bad for the battery, is it possible to disable the loading or maybe remove the battery?

  I looked in the manual and forums but I couldn't find something similar to this model.

  If someone knows what I could do?

  Thanks in advance.

  There is a setting in the management of the lenovo energy that limit the limit of battery charge 60% and there after stopping tilll the battery level drops to 55%. This is the battery protection mode (in some laptop that is optimize for the life of the battery or similar). It just open energy management and access the battery settings by clicking on the icon. Then select the mode and voila!

• G780 battery charge problem

  Hi guys, I discovered recently a problem with my battery. It stops just to 60% during charge and simply displays: plugged in, does not support later. I have Lenovo energy management and I tried to run the battery reset meter and finally after a long process the same problem of 60% of the charge occurred. Can someone give me a cause of suspicion it's only 1 year that I have my laptop and I take really good care of him and these things are kinda stressing me .

  Nice day.

  Please take a look at the photos at the point #2 of the neokenchipost:

  http://forums.Lenovo.com/T5/Lenovo-3000-and-essential/AC-power-questions-G505s/m-p/1686047#M59533

  Looks like you have optimized the battery or Mode of Conservation (depending on your version of Windows). If so, she works as designed stopping at 60% load.

  Does that help?

  Kind regards.

• Stuck at 50% after battery saver mode have changed for Linux.

  Hello

  When I had installed on my X 1/2 G W7P, I turned on the battery saver mode.

  Later, I decided to change the Linux operating system and has not changed this back to normal

  operating on battery and Linux (Debian) seems only to charge the battery at 50%.

  First of all, it is in fact a matter of strives Windows and second, is there a command

  or option in the BIOS that resets the battery to full charge mode?

  TIA.

  Additional...

  TLP do not work on systems with sandtbridge or newer.

  Which, I believe, includes the 1/2 G X. However, another

  Manager power exists that can work.

• MS A30 - battery charging when I plug in the power cable

  Hello

  I'm having some problems with (I think) on my A30 power management utility. When I am running on battery power and I plug in the power cable, the battery continues to discharge even if the laptop 'knows' that it runs on the power grid (ie the utility says "current generator: alternating current.") "Online, discharges: 82%. Strangely, if I put the laptop in mode 'sleep', then resume, she goes back to normal (i.e. working on current alternative, the battery charges).

  It is true, I think that this began after I installed "PC Pitstop optimize Scan" www.pcpitstop.com (please, not conferences - I used a couple of their public services before and they were very good, so I thought it would be too much), so I guess it's some sort of configuration problem, but I have no idea where to go from here. I went through all the options on the power management utility, but they all look sensitive. Any ideas (other than do not install software stupid, doubtful)?

  Kenny

  Hi Kenny,

  I experienced this behavior on my A30 where the system says it works on current alternative, but still drains the battery and stops eventually.

  In my case the problem has proved to be a loose DC Jack that sometimes cuts off contact with the socket on the back of the laptop. This momentary loss of power DC seems to provoke the power management utility switch to battery power, even though the DC power is restored. The only way out of this situation is to Hibernate / restarting the laptop.

  I think that it is a problem with the power supply subsystem in the laptop that does not react properly when it encounters a momentary loss of DC. Then the Toshiba power management utility is no longer responds correctly and switches to the battery power.

  My only solution to this was to anchor the DC cable to the back of my A30 so that there is now no chance of the plug DC moving in its socket. This has proved to be very effective for my A30 and I've had no recurrence of the problem.

  HTH

• Changing the setting of 80% to 100% on the Satellite Z30-A-104 battery charging

  Hello

  I used my Z30 Satellite primarily as a desktop till now (the charger is still plugged).
  One day I got a popup option to increase the life of the battery (charge only up to 80%) and I accepted the option.

  But now, I'll be traveling and can't reset this option.

  I want to charge the battery to 100% and be able to take advantage of longer battery life.
  How is that possible? Help!

  See you soon
  Vivek

  Hello

  I think that you have changed this setting in battery Toshiba Manager c++.
  You must disable Mode "Eco-responsible".

  Perhaps this Toshiba info would be useful:
  [TOSHIBA Eco Mode ECO CHARGE MODE charge | http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Eco-Charge-Mode/ta-p/355376]

• Satellite A660 - fan 90% on battery optimized mode

  Hi all my dear users of Toshiba that I really respect because they use such great brand Toshiba. I hope you have the time to read my problem and that its length can not bother you and you can do me favor and answer me.
  I am from Egypt and I recently bought the Toshiba Satellite A660 - 17M. It is really a great device and I've updated the BIOS twice on the official website of Toshiba and now I have the 2.00 BIOS os independent.

  My problem now is that the fan cooling and here's what happens with me. When I adjust method in the Toshiba cooling ensures peak performance so that the temp is between 36 to 63% and the fan speed is 52 to 75% and it takes a lot of time turns off because it is not easy to reach the beach of temp which makes it either stops when I'm inactive or work.

  The largest part of the problem is that when I change the method of cooling battery optimized mode everything working the fan going to 90% and rest, so never or up to this I put the laptop before in the refrigerator for 2 to 3 minutes. Then it is cool and it stops. So in the meantime either inactive or work done, it jumps again to 90%. When I turned off my laptop and wait to be completely cooled, then turn it on while in battery optimized mode the fan starts working during start-up only stops until Windows starts completely then it climbs to 90% and remaining so ever except when I force him to be cool by placing it in front of the fridge.

  My friends, I think that it is not logical to always work in conditions of refrigerator and also it is illogical to have fan always 90% especially that I'm on battery optimized mode.

  What is the problem in your opinion, and if someone has the same laptop can help and describe what is happening with him also. I do not remember if these events are produced before BIOS set to day or not as I they weren't in my mind before BIOS update and I don t know whether or not this happens also before the BIOS update.

  From what I understand, is that the battery optimized mode fan running weaker than the maximum performance mode. Then what's happening and if you say he remains silent until this than complete Windows starts and runs then 90% to compensate for the accumulated heat, I agree with you, but shouldn't t happen to some extend then stops at the battery life optimized according to the name of the battery optimized mode.

  Really I am so disappointed and now know what the problem is. Please help and don t advise me to call Toshiba. Whatever they say please send us the laptop. I m waiting for your responses and thanks a lot for the time spent reading my message.

  Hey,.

  Normally if you use the battery mode optimized for the method of cooling the fan will run less maximum performance. So your laptop will work more silent, but with a higher temperature but usually you don't notice it.

  So if this happened only since the update of the BIOS is you load the default settings in the BIOS after update? Go to the BIOS Setup and press F9 to load the default values. Then save & exit the BIOS Setup.

  I would be also interesting to know what operating system you are using. What is the version preinstalled Windows from Toshiba or your own installation?

  The fan should be cleaned from time to time using a jet of compressed air to blow the dust from the cooling fans. This can also help improve the cooling. An accurate and interesting article on cleaning the notebook, you can find here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

• Questions about the BIOS update and battery charge on Satellite M30 104

  Hey,.
  I try to update my BIOS, but it does not work because my battery won't charge any more, if a window always tells me that my battery is not enough. Yet, the reason why I'm updating my BIOS is that I read in a forum that might solve my problem of battery charging.
  I'm fairly certain that the battery is not the problem itself: I bought a new battery, it worked for 10 minutes once or twice, then again the load stop completely.
  If anyone knows what the problem is or how to update my BIOS, please...

  Hello Celia

  I am not a technician, but as far as I know, BIOS has nothing to do with charging the battery. In my opinion, there are some problems with e-procurement (electronic load). Sorry, but I imagine that you must contact the partner in your country.

  They have diagnostic tools and it can be verified. Please call and simply explain the situation.

  Good luck!

• Second battery charge no more than 29% on Portege R200

  Hello

  I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

  I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

  Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

  Thank you much in advance.

  Hello

  Looks like a malfunction of the battery to the battery performance and life is limited
  After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

  I think that you should simply replace the battery with a new and check if it helps to solve your problem!

  See you soon

• Y40 - 70 won't hold battery charge

  I plug, 100% load, unplug the unit. Bed 100% charged battery. About 15-20 minutes later, computer laptop stops suddenly with a dead battery. When I plug it back in and get it restarted, it shows the battery charge again, 0%.

  I'm on Windows 10, but this problem started a few weeks before proceeding with the update. Thanks for the help!

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you

• Question about battery charger - Satellite A60

  I live in the United Kingdom and hope someone can help me here. I have a problem with my laptop Satellite A60 where it will no more work on the power adapter as the laptop power light does not illuminate and not fed, it. So I used the battery upward and he works on it but who reached now so I can't load up on the computer.

  So I would like to know if I can buy a charger for the battery to use just battery mode all the time. I say this because I had a guy look at the laptop and he said I had a small burned/broken component on the motherboard and was the reason why I can't get the socket and replace the Commission would cost 250/300 pounds is true or could I get a cheaper or the Board repaired.

  Does anyone in the UK/midlands know of anywhere? This is why I would like to know if I can get a battery charger for my computer...

  Hi mate,

  I'm sorry for you because of your situation. It's really not very nice when something happens.
  Unfortunately it isn't charger for your battery because they are charged in the machines.

  Then, you can do the following:
  Remove the hard drive (to save your data) and sell the machine on ebay. After that, buy a new one. :)

  or

  Bring your machine to repair and pay good money to make your machine working again.

  Hope I could help you ;)
  See you soon