HP 10 G2: is the HP 10 G2 LSH compatible

The HP 10 g2 is compatible with mhl technology?

Hello and welcome to the HP support community!

The specifications of this model can be found here.

They make no mention of the compatibility of the MHL.  The USB port is version 2.0.

WyreNut

Tags: HP Tablets

Similar Questions

  • is - a mc at the beginning of 2008 pro compatible with sierra?

    is - a mc at the beginning of 2008 pro compatible with sierra?

    After no.

    https://www.Apple.com/MacOS/how-to-upgrade/

    "Mac Pro (mid-2010 or more recent).

  • The MacMini (late2009) is this compatible w/Sierra?

    The MacMini (late2009) is this compatible w/Sierra?

    It is difficult to say with certainty, see > get ready for macOS Sierra - official Apple Support

    If so, you'll probably want at least 4 GB of RAM as the previous OS Xs.

    https://eShop.MacSales.com/shop/Mac-mini/

  • Is the Airport Express optical fiber compatible? (Verizon Fios)

    Is the Airport Express optical fiber compatible? (Verizon Fios)

    Verizon wants me to have one of their routers. Is it necessary if I already have an AirPort Express?

    The airport is a router, not a cable modem. Verizon are likely to provide a cable modem that is also a router, and therefore has an entry for the cable and several outputs ethernet; It can also have wifi.

    You can probably turn off wifi if you prefer to use the airport; and there is nothing prevents to connect airport entrance to one of Verizon output using its wifi and ethernet ports. As long as it is reasonably recent, it should detect that it is connected to a router and configure properly.

  • What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    What is the acquisition card OR 1426 compatible with a line/Linear array scanner?

    I'm currently doing a feasibility study of the project that uses the NI 1426 and a linear Array Scanner acquisition card, and I would like to know if they are compatible with each other.

    Thanks in advance

    Martin

    Hi sandeepchinni,

    I agree with gunnesjr that we need more information about what you mean by Linear Array Scanner.  As he said if it is a scan line or an area then yes it will most likely compatible.  A small correction to what he says.  You need not buy NI Vision if all you need to do is to acquire images.  The framegrabber will be delivered with the software that is needed to work.  If you need to do any image processing then you need NI Vision.  The following knowledge base lists what is installed with the driver for the card.  Live that are installed with OR-IMAQ Vision Acquisition Software?

  • OfficeJet Pro 8600 Plus: is the Officejet Pro 8600 wireless compatible with the new standard AC dual routers.

    ISP is the Modem upgrade to DOCSIS 3.0 model. My current router, Linksis E 3200 is not fully compatible with the new modem, I have to upgrade to a model of AC Smart WiFi dual band.

    The wireless in this 8600 printer is compatible with the standard AC. If this is not the case, can it be upgraded via download to make the wireless compatible. Top of my head I have think.

    The wireless connection in the Officejet Pro 8600 is compatible with 802.11n connection on the 2.4 Ghz band.  Check your new router (or candidates for a new router), most routers AC will be also in charge of N connections.

  • "Failed to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer

    I have Lexmark X 5410 printer with the installation CD. Installed perfectly on computer with Windows Vista 32 bit. Try to install on Vista 64 bit computer but get error message "unable to create the object print Lexmark X 5400 Series. The printer driver is not compatible with a policy on your computer that blocks NT 4.0 drivers (1930). Tried using the compatibility in the computer. Without success. How can I fix?

    Original title:

    32-bit and 64-bit Windows: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/32-bit-and-64-bit-Windows-frequently-asked-questions

    Excerpt:
    Can I run a 32-bit program on a 64-bit computer?

    Most programs designed for 32-bit version of Windows works on the version 64-bit windows. The notable exceptions are many antivirus programs.

    Device drivers designed for 32-bit versions of Windows do not work on computers running a 64-bit windows. If you try to install a printer or other device that only has 32-bit drivers available, it won't work correctly on a 64-bit version of Windows. If you don't know if there is a 64-bit driver available for your device, go online to theVista Compatibility Center"" href = "http://go.microsoft.com/fwlink/?linkid=142444" > Windows Vista Compatibility Center

    .
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • The 300 series switches are compatible with detection of PoE before standard in old phones Cisco?

    The 300 series switches are compatible with detection of PoE before standard in old phones Cisco? They don't seem to be (7902G don't turn on when it is connected to a SF302-08MP with firmware version 1.1). What no need special configuration on the switch to enable this detection?

    Please note that the switches of the series 200 and 300 are now supported POE Legacy Cisco from September 2011, to provide power to 7960, 7940 and other phones standard pre and APs. Details on the following link:

    https://supportforums.Cisco.com/docs/doc-18337

  • The microprocessor as fast and compatible with creation software market who?

    Hello. I use Adobe first CC. I did a video processing that can exceed 5 hours. The rendering of my computer time is too long. 4790 3.6 GHz i7 processor has 8 MB Intel on my computer. I want to buy a new CPU on my computer better. The microprocessor as fast and compatible with creation software market who? Make the rate for which you propose to first CC processor.

    Exon processors so unfortunately I do not have a budget.
    Intel Core i7 Extreme Edition 3.0 GHz 20 MB Cache LGA 2011 v3 5960 X
    X 99-DELUXE ASUS / Intel U3.1 X 99-3200 Mhz (OCR) DDR4 Socket 2011-V3
    Kingston HyperX 3000 mhz Savage 8 GB DDR4 RAM x 4 = 32 GB

    Samsung 950 Pro 512GB 2500 to 1500 MB/s m2, SSD PCI-E 3.0 MZ-V5P512BW

    Archive of Seagate 8TB 3.5 "5900 RPM Sata 3.0 drive Sabit ST8000AS0002

    You can meet them in the budget. Is this system enough? Exon a passage or I?

    It is a system which may constitute the budget better than this system

    Thank you very much for your help

  • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

    I see that this error was mailed here, but can't seem to find a position with a resolution.

    We use Lab Manager 4.0.4 and just upgraded the hosts in our laboratory.  Before updating to ESXi 4.1 ESX 4.0 u1, we cancelled all VMs in all configurations.  There is none who were suspended, they were all turned off.  We have improved vcenter 4.0 to 4.1 as well.  We moved from a dell poweredge 1950 with two quad core intel L5410 to a r610 with two quad core intel processor E5506.

    When I try to turn on some of the lab configurations (our VM models all work fine), I get this error:

    • Cannot use 'lab1' host because the host CPU is not compatible with the judgment of the virtual machine suspend state.

    I threw the State for the lab configuration (even if it was turned off and cancelled) and still get this message.  I guess the processor architecture of these chips is quite similar, and both are Intel.

    If I go into this directory of Manager of laboratory inside the data store for one of these virtual machines that does not light and add to the inventory, he turned and starts fine on my server esxi 4.1.  So how do Lab Manager to get account it's well deploy and start it?

    Hey billk.

    Although not supported completely, you can solve it by going to the SQL of Lab Manager database.  Make sure that you back up your database before you do anything like that.

    Open the table "fsdir" and corresponds to the dir_id with the id Lab Manager VM.  Once you find the relevant line, change suspend_proctype_id to null (Zero-Ctrl).  You can do this while Lab Manager is still running.

    The results can be unstable (i.e. Windows can crash if it was a drastic change of CPU), but at least you look at a hard reset.  The bat reset certainly not being able to return to the previous state.

    Also note that while Lab Manager does not include CVS, if you activated, your virtual machines still work in CVS mode.  If you have a mixture of heterogenious of hosts in a cluster for Lab Manager, you can see this question pop up a lot.  There is absolutely nothing wrong with take back the virtual machine because of the VCA, but Lab Manager thinks otherwise and prevents it.

  • Most recent version of the Oracle client version is compatible with the low version

    Most recent version of the Oracle client version is compatible with the Oracle DB low version

    Client Oracle 10.2.0.5 version should be compatible with 10.2.0.4 DB?

    Yes - see on Oracle (ID 207303.1) support compatibility table

  • The new Apple Watch comes compatible with my iPhone 5 s 16/09/2016?

    Hello world

    I am interesting in buying the new Apple Watch, and I don't know if the watch is compatible with my iPhone 5 s.

    I already pre-order my iPhone 7 more, but it won't do anytime soon, and I'm sure that the watch is compatible with the new more than 7. I wonder all the old iPhone 5s. My iPhone 5s does not use IOS 9, but 10 of IOS.

    Thank you

    Hello

    Yes - the new Apple Watch models are compatible with your iPhone 5s.

    As for the first generation watch, the new models require iPhone 5 or later.

  • Is the current version of Firefox Compatible with Windows 10

    Windows 10 due for release July 29, Firefox will be compatible

    If all goes well, there will be no problem. Some people are already using Firefox with Windows 10 pre versions.

    It should be a 64 bit version of Firefox for Windows available later this year, but until then the standard 32-bit for Windows Firefox is what should be used.

  • Why do I get and error when you try to install the calendar which is not compatible with firefox 34.0.5 lighting...

    I use firefox 34.0.5, my thunderbird is 31.3.0 and I am trying to install the lightning calendar. I checked the compatibility list. I downloaded the correct version of the lightning, and whenever I try to install any version it fails and gives me errors that this version is not compatible with firefox 34.0.5. I tried five different versions of lightning with the same results.

    It is an extension of Thunderbird e-mail client.
    https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/

  • Which runs the latest version of Firefox compatible with a MacBook Pro with 2.33 GHz Intel Core 2 Duo OSX 10.5.8?

    I keep says my browser needs updating and it does not work on some Web sites. I had bad experiences in the past trying to update to Apple's OS and Firefox due to compatibility issues. I guess I could go to Safari, but I have been using Firefox for many years and prefer to stick to what I know.

    Firefox 16.0.2 was the last to work on the old Mac OSX 10.5.x as Firefox 17.0 abreast demanded that OSX 10.6 +.

    https://www.Mozilla.org/en-us/Firefox/16.0/system-requirements/
    https://www.Mozilla.org/en-us/Firefox/17.0/system-requirements/

Maybe you are looking for

  • Air iPad does not illuminate

    The symptom is more simply not turn on: It happened a few times before (within two weeks) that the ipad just froze and turned the icon apple black and white background. After working in the home/power together for a while, he fixed the situation. Las

  • deactivation of the system

    My computer was stolen a few months ago. The police returned the laptop, but now she's asking code administration or power. After trying now I have exceeded the attempts he said disabled system and code 65454648. Help, please? +

  • Disable the function of property

    Good afternoon I'm using LabVIEW 8.6.1 and I used three Boolean types in a vi. What I want is: when one of them is on the other two to be disabled, and of course when all are to be activated. Can someboby help me with this. Thanks in advance

  • Photosmart 7525: HP7525 wifi frequency 2.4 and 5.0?

    I have a Motorola SBG6580 router I had to fix to 5.0 ghz in order to get faster speeds on my laptop. It is unfortunately not a router dual-band auto. In any case, when I made this change, he lost contact with my HP 7525 which leads me to believe that

  • BlackBerry smartphones receive do not mail

    I can send email from my BB, but for some reason that I don't get everything now. Only the events in the last hour or two! All ideas