HP Mini 210-3000sd: HP Mini 210-3000 memory update

Similar Questions

• HP Mini 210-3000

  I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

  The Bios CMU however not to update or restore as update is not available

  How can I fix the user profile so that I can open a session?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• HP Mini 110-3000: after formatting wifi network icon missing

  Dear Sir.

  I have HP Mini 110-3000. As there is problem in my original preloaded operating system so I formatted and installed windows 7 ultimate 64 bit operating system.

  After formatting, find it me impossible to see the wireless network icon in my tray instead it is another icon that is used to connect to the internet using a LAN cable.

  What is the problem?

  Hello:

  Go to Device Manager and look at the list of devices it.

  Is there a device listed in the Device Manager, labeled as a network controller?

  If so, this is the wireless card that need to install the driver.

  If you don't know which driver you need for the wireless card, please report it to the listed hardware ID of the device that you see as a network controller.

  To find the hardware ID, click the network controller device.

  Then click on the Details tab in the upper part of the window network controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd item (Hardware ID).

  After the first string of characters you see in the window.

• Why my guard for computer laptop hp mini 110 3000 kick start-up repair if I turn it on?

  HP mini 110-3000

  OS: Windows 7 32-bit

  Startup Repair always appears when I turn on my laptop, please help me.

  There are a handful of different reasons that could cause this. Are you shut down the computer properly? This may be due to being badly off the computer.

  Thank you

  Sean

• HP Mini 210-3000 network adapter

  Hi all

  Please, I got a problem with my hp mini and after having reinstalled windows 7 on it, I can't have the internet connection.

  Here are the details for the drivers I need.

  Network Manager: PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01

  Video video controller: PCI VEN_8086 & DEV_A012 & SUBSYS_3594103C & REV_02

  Thanks in advance

  Hello:

  You need these drivers in the order that you posted the ID:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108902-1&cc=us&DLC=en&LC=en&OS=4062&product=5082192&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-95476-1&cc=us&DLC=en&LC=en&OS=4062&product=5082192&sw_lang=

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• HP Mini 210-1121ej 2 GB memory update

  The HP service center and dealer can provide 2 GB of RAM that works.  Tried service center and the laptop hooked - they ordered a new motherboard and got the same answer.  Auditor memory online memory crucial responds "not available" and others don't recognize yet model number 210-1121ej (even if HP Support Assistant confirms that it is correct).

  Nice design, nice blue color but don't try to run more Windows 7 and Internet Explorer/Firefox.  Microsoft Word 2010 is too ask that much for 1 Gb RAM standard - just goes to sleep.

  All work beautifully - can run Firefox, MS Office 2010 Word & Outlook and Skype and camcorder running smooth.

  Finally found HP Support Assistant, who knew the correct details - HP part # 613857-351 2 GB RAM

  Manufacturer:

  (1) HMT325S6BFR8C-H9N0

• HP Mini 210-4120: Windows Update does not work after the Reset HP Mini 210-4120 factory

  Following the advice in another post on this site, in order to create a "clean" installation and his work & Office Starter (they do now--they have not before) I did a reset to factory of the recovery partition. (Trying to create discs of recovery or a USB key on the two brackets to the stage of checking).

  The new game worked well, without error, BUT try as I might, I can't have the updates of Windows to work. If tried to re - adjust the C:\Windows\SoftwareDistribution folder, sfc/scannow (no errors found) and using the powerful Microsoft FixIt which is supposed to re - install the Windows Update service - all without success.

  I read on a post no HP (but I can't remember where!) someone finds this problem caused by a chip Intel driver, so maybe that could be applied to my PC.  However, since the factory Reset recovery Partion includes SP1, I would have thought that at least the system should download updates!

  I get no error message, it justs waits... and waits... and waits.  I let wait for 90 minutes, but there is still no sign of activity.

  I hope someone knows how to solve this problem otherwise I'll have to go back on my installation of non - Office Starter - his, no. (Who, fortunately, I have a couple of image.)

  Hello:

  I get it, I guess.

  I thought that you also had a simple W7 starter installation disc (which must be done by editing the efi cfg file in any drive of W7 installation), and then you use the product key on the case of the laptop to turn on.

  I knew that you had tried the partition recovery without result.

  I was in the middle of the answer I have provided the link for audio driver, and I see that you already have.

• HP mini 210 1091NR memory upgrade, possible?

  I have received contradictory information concerning the possibility of upgrade from 1 to 2 GB memory. No one knows for sure if she will definitely work or be a waste of money to try. I would only really be upgraded because I can't really use Skype as the system is seriously more taxed right now and I removed all the things running in the background.

  My system is running windows 7 starter edition.

  Thanks for your help!

  Larry

  2 GB upgrade would be fine.

• HP mini 110-3000 black screen

  The reset but still xp does not start.

  Just a cursor blinks upper-left with black screen.

  All the test went thru ok and Quick View strives to find

  but I can not for xp.

  Did you run the Diagnoistics to start during the startup (by pressing F2) and run tests of different? If Yes, and the material is very well, I think it would be that the OS is corrupted and you need to reinstall the operating system to use this mini device.

• IPad mini 1 explains its update

  I can't get 10 IOS on my ipad mini 1? I thought he would be out for all versions. I'm in Australia.

  Sorry, 1 Mini is not compatible.

  http://osxdaily.com/2016/06/14/iOS-10-compatibility-list/

• HP Mini 1035NR: 802.11ac update for HP Mini 1035NR

  Are you looking for a current internal wireless card in my mini 1035NR to a 802.11ac to be compatible with my home network.  Want to know what cards do not work (not on the white list in the bios) before buy you. Is there a list to show what cards would work? Seen 7260 Intel but it looks like success in a laptop HP is not guaranteed.

  Map No. 802.11ac will work. They did not exist when the laptop was built, so it can't be on the white list. Here is the Mini 1035nr REPAIR, and it lists a single wireless, a Broadcom card. See page 14:

  Link to the manual

  Sorry, but Netbooks are very limited. They were popular for a very short time. If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Inspiron Mini 1012 - Max memory taken in charge?

  Hello comrades Inspiron Mini 1012 users:

  I noticed that my software of Dell Support Center reports that my 1012 can take charge of 8 GB of memory. But when I contacted Dell via Live Chat support, they say the memory maximum supported is 2 GB, which is what I currently have.

  There, everyone using greater than 2 GB in their 1012? Would love to hear from you.

  See you soon,.

  bhoffe

  Guide specifications for the Mini 1012
  http://support.Dell.com/support/eDOCS/systems/ins1012/en/CS/cs_en.PDF

  Memory a user accessible SODIMM connector
  Memory 1 GB and 2 GB capacities
  Type of memory 800 MHz DDR2 (667 MHz works)
  Memory 1 GB and 2 GB configurations

• HP mini 110-1111TU PC update

  Hello and good day to all!

  I live in the Philippines and I just bought my HP mini 110-1111TU PC to one of the stores in Singapore and I wonder if its posible to upgrade my memory to 2 GB? The specification States, it supports only 1 GB of memory, maximum.

  My question is, will the aircraft crashed when I update in 2 GB?

  Thanks in advance!

  It seems that this is possible. Here is a link to a youtube video where a guy did exactly that. He had the habit of GSkill ram.

  Best regards
  ERICO

• U44M1 | 210 has no update

  I'm unable to complete the update of cloud creative Photoshop CC 2015 and bridge CC.  Halfway through, I get the message update failed (U44m1: 210).  I am running Photoshop CC 2015, 2015.0.0 output on my Sony Vaio Ultrabook with Windows 8.1. I just can't update with your last update, even with town privileges involved.  Same thing with bridge CC.

  Your help would be greatly appreciated...  Thank you.

  David B.

  Hi David,

  Please follow the steps mentioned in the article.

  https://helpx.Adobe.com/Creative-Suite/KB/error-u44m1i210-installing-updates-CCM.html

  Please post on the Adobe Forums.