HP Mini 210-1121ej 2 GB memory update

Similar Questions

• Mini 210 help with upgrade options

  I have a mini 210-1142CL

  Someone has updated the motherboard on this model and if so, is it really make a difference in performance.

  Upgrade options are also somewhat confusing.

  The mini works fine for me and before that pitch for a newer model, wanted to explore options of upgrade of it for at least a dual processor at the fastest speed it can handle.  Right now, it is running.  Have disk space enogh with 128 GB of free space, 1 GB of RAM.   Running a 1.66 GHZ N455 chip.

  Not sure if a 1.5 GHZ dual chip will really make a substantial difference, or if it's time for new technologies.

  Thank you

  Stan

  Atom processors were a dead-end. However, the N550 1.5 ghz dual was one of the best. A bit like the world above 'little person' but still a honor:

  http://cpuboss.com/CPUs/Intel-Atom-N550-vs-Intel-Atom-N455

  Just to put it into perspective, here is a graph of the N550 vs some real processors.

  http://www.cpubenchmark.NET/CPU.php?CPU=Intel+Atom+N550+%40+1.50GHz

  I saw the N550 motherboards for $45 on eBay. Performance is perhaps 30% better than the single core 1.66.

  Your best upgrade is to install the 2 GB of RAM.

  If you feel compelled by the whole thing of netbook, I'd get a new laptop. The technology comes from the netbook to be a reference in the calculation of the story. Good idea at the time. A good current smart phone probably has as much computing power.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Mini 210-3000sd: HP Mini 210-3000 memory update

  I bought a HP Mini 210-3000sd, or LT963EA #ABH used. It came with 1 GB of memory, which is great for Linux with a small desktop computer, but most certainly is preferable. I think to upgrade the memory, but am a bit confused:

  According to the product page.
  http://support.HP.com/nl-NL/product/HP-mini-210-3000-PC-series/5082191/model/5116173/document/c02904... 1 GB is the maximum amount of memory.

  After Crucial, they have a module for 2 GB of RAM for this laptop, only they call cell 210-3000CTO and their recommended module has a non standard of 1.35v rather voltage of 1, 5V.

  The maintenance manual mentions single-channel 2GB DDR3 - 1333 MHz, no mention of any particular tension, but they list a number of spare parts 621565-001, which I couldn't find in the HP store, and he otherwise would be probably much more expensive than elsewhere.

  Can someone give me more specific information, that is, the memory is expandable and if so, should it be 1.35v?

  I got the memory today. Replace the memory module was quick and easy. Now the Starter Edition of Windows and Linux see 2 GB, and everything starts much more quickly.

• mini 210-1142cl RAM update

  question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz?

  If so, how?

  I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB,

  According to the manual, the mini can accept an upgrade to 2 GB, but it must be:

  2GB PC3 - 10600, DDR3-667 MHz, 204 pins sodimm

  Centon 2 GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm, tigerdirect, slightly cheaper.

  and now he has a black screen, and I can't start with F2, F8 or F10.

  What I did:

  1. update the BIOS to F24
  2. upgrade to Windows 7 Ultimate 64 bit, the Intel ATOM chip is 64-bit
  3. went to crucial.com for scanning of memory, and it is guaranteed to work:

  2GB PC3 - 10600, DDR3-1333 MHz, 204 pins sodimm

  Is it possible to make the 1333 MHz running on the cl 210-1142 mini?

  Yes, it is possible to improve from 1 GB to 2 GB

  Thank you

  I went to centon dot com, the hp mini 210-1142cl is not on their list of supported computers.

  However, I just got a Centon support respoonse and said that part # is compatible to->

  Centon CMP1333S02048.02

  also confirmed crucial RAM

  CT1440459 part number

  Material CT25664BC1339.8FMR

• Upgrade memory - HP mini 210 3000SD

  Hello

  I have a HP Mini 210-3000SD laptop. The HP support page says the RAM is expandable up to 1 GB, but I saw that a cell phone even has been upgraded to 2 GB.

  Mini Apparanetly hp in the series have the same thing too, hp support page says up to 1 GB, but in fact, it was possible to upgrade to 2 GB.

  My guess is that I have to use a special type of DDR3 RAM, anyone have advice?

  Thank you!

  daniel71317 wrote:

  Here is a link to the manual for this PC series portable:

  http://h10032.www1.HP.com/CTG/manual/c02987479.PDF

  If you look at the section of the Ram, you'll see that the laptop will support up to 2 GB of DDR3-1333 MHz ram. There is one slot memory, so the chip you buy must be a 2 gb chip. You can also go to www.crucial.com and download a tool they have there that will scan your system and give you ram and disk hard upgrade results specific to your system.

  Thank you, the Manual Guide to different Rams depending on the operating system for most windows. I have a debian (linux) on my mini hp computer... could this be a problem?

• What are the upgrade options (memory, video, audio, etc) for my HP Mini 210-4022 YOU?

  Are there options to upgrade for my netbook HP Mini 210-4022 YOU?

  I'm hoping to hear that there is in the following categories and their corresponding limit for upgrades:

  - internal memory (currently 2 GB of DDR3 memory, as far as I know, but am sure it's 2 GB), I want that this more general if possible

  - graphics card (integrated Intel, I know it is soldered on the motherboard but maybe, just maybe? a upgrade?) Some games I can't play and having problems with simple games and apps that should not be a problem in the first place as PlantsvsZombies because the latest drivers cannot Martin play this game and other games as well and I need to uninstall the drivers of the said... Is that how it supposed to work backward rather than forward? But I hope I can improve this...

  - audio (but that's fine, I have beats just want to know)

  Thanks in advance and more power for HP... My brother for your business works if all goes well I have not made a mistake in buying HP products... But so far so good, a few small bumps on the road as I call it...

  Hey,stealth_1014.

  Unfortunately, you can not.

• How can I order additional memory for my HP Mini 210-2001sd PC computer

  How can I order additional memory for my HP Mini 210-2001sd PC computer

  Here is a link to a seller.

• Can I have my HP mini 210-2080NR updated with more than 1 GB of RAM it came with?

  I have a HP mini 210-2080NR. I would really like the amount of RAM upgraded fom the he arrived with more than 1 GB. Is this possible and if so, how it will manage?

  Hello

  Yes you can, you can upgrade to 2 GB and because she has only 1 slot you have to throw 1 GB and 2 GB, put on it. I replaced the RAM for my daughter about 2 months back. He encrypted his 28 our Australian dollars and 5 minutes of my time.

  Kind regards

• Upgrade hp mini 210-1110eq RAM to 2 GB

  Hello..
  I have a HP mini 210-1110eq with Windows 8.1 Pro (i bought the notebook with win7 starter). I have only 1 GB of RAM. I recently bought a KINGSTON 2 GB 1333 MHz RAM. I updated my BIOS for HP f24 (HP.com said this is the most recent). But when I put it in the 2 GB of RAM, the laptop does not work (I think the cooler works). Someone help me please. Thank you!

  Here are recommended by Crucial memory:

  http://www.crucial.com/USA/en/HP-mini-210-1108tu/CT5626138

  This model has caused support long thread here when he came out about the compatibility of memory. A lot of people had a lot of trouble to get 2 gigs to work right:

  http://h30434.www3.HP.com/T5/notebook-hardware/HP-mini-210-1100-1180nr-memory-upgrade-DDR3-nothing-works/TD-p/287913/page/4

  Apparently, the memory density is a problem. This means that memory black blocks how are on the chip.  Read the entire thread. Crucial offers DDR3-1600 was 8 blocks of memory, not 16 and she is at work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP Mini 210-1000 is very slow, even after disabling several programs.

  I bought a HP Mini 210-1000 little more than one year. 1 GB of RAM. Win 7 Basic. Since only my son used and that occasionally, I never realized how incredibly slow, it was. Often, it takes 1 min for IE open a page. Even though I have broadband, I can't watch Netflix movies. I have disabled several programs in the menu of boot, run CCleaner, but it is still slow. When I check the Task Manager, it seems that 60-70 memory is used even when the CPU usage is 5%. I tried to tune up with HP Support Assistant, but when I click on update, it fails to update, fails to analyze or gather information. HP Support Assistant is only for products still under warranty? Can I maybe just uninstall and reinstall? Or am I left with no other choice than the upgrade of perhaps the memory? I would appreciate any advice. Thank you.

  boonetrace wrote:

  He said no "reference" on the mini, only the number of 'product', that is: WH684UA #ABA. Thank you.

  I was thinking about product and written a part.

  The first time I asked the correct thing and, unfortunately, I made a mistake.

  My advice? I would upgrade the RAM to 2 GB.

  Resource:

  Crucial - HP Compaq HP Mini 210-1084NR Netbook

  You can check some solutions in the link below:
  How to speed up system boot time and performance.

  PS.

  Remember then it's the netbook, so it will be never powerful as laptop.

• HP Mini 210-2070NR RAM upgrade

  I bought a HP Mini 210-2070NR at Staples and wanted to upgrade the RAM to 2 GB.

  Manual says that Windows 7 Starter only supports 1 G of RAM so I've upgraded to Windows 7 Home Premium to try to support 2G of RAM.

  Went to Crucial site, put in the computer model, classified in 2G of RAM DDR3 10600 S, installed and computer won't start with 2 G of RAM in it.

  Deletion of 2G, inserted original 1 G to start the computer to the top.

  I've updated the BIOS with the latest version on the HP website.

  Someone can help me to find a solution to this, or is this netbook on only a function with 1 G of RAM?

  Thanks in advance

  Gaspasser

  You can upgrade to 2 GB of memory, but at the moment, not all DDR3 memory is accepted by the new Intel N455 processor... You will need to order it from HP part Surfer... Here is the link for the same thing... http://PartSurfer.HP.com/search.aspx?SearchText=615863-001

  There is another forum thread, where the user has been able to find particular memory sold by Crucial module which works with HP Mini 210... Here is the link for the same http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=C3C1FEA3A5CA7304

• HP Mini 210-3000

  I have a HP Mini 210-3000 got my son, it works fine but now the user profile is not recognized at startup and I can't get past the password, the password is accepted, but the message "the service user profile Service has no logon. Failed to load the user profile"I was HP Advanced System Diagnostics and the machine passes all of the Tests such as Start UP, hitches etc.

  The Bios CMU however not to update or restore as update is not available

  How can I fix the user profile so that I can open a session?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Mini 210: the mini 210

  Hi guys.
  
  I have a HP mini 210 which I use mainly for internet when they travel, but also for playing iTunes for house music when I execute concerts. Last week the on the key sound turns power on and off remains permanently lit. If I hit him, the o/s tells me that his is switching on and outside, and yet there is no sound on the internal speakers or headphones if I plug them in. Device Manager tells me that the sound is very good, icon audio system looks very happy they control noise. You can see the icon switch between sound off (with the cross inside) and suite. Supposedly I can adjust levels. But no sound, and the orange light on this key remains resolutely. It makes me think that it is not material, but a software problem. All the latest updates are on board.
  
  Met someone with something like that before or have an idea where to find the next?

  See you soon

  KeV

  Hello @kevgl,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I stumbled upon your post on sound level and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:
  How can I find my model number or product number?

  In the meantime, have you started having this problem before or after the upgrade to Windows 10?  Try to review the following document and let me know how it goes:

  HP - no sound from speakers (10, 8 Windows) laptops

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Mini 210% of the battery cannot go > 75%

  Hello. I have a mini 210-2036TU for<2 months.="" i="" recently="" just="" noticed="" that="" my="" battery="" percentage="" indicator="" cannot="" go="" higher="" than="" 75%.="" last="" night="" i="" charged="" it="" while="" the="" notebook="" is="" turned="" off,="" and="" the="" charge="" light="" indicator="" (orange)="" was="" on.="" however="" in="" the="" next="" morning="" the="" charge="" light="" indicator="" still="" shows="" orange="" (as="" far="" as="" i="" know="" when="" the="" batt="" is="" fully="" charged="" the="" light="" indicator="" should="" turn="" blue).="" i="" did="" though="" update="" the="" bios="" recently="" to="" fix="" the="" missing="" home="" end="" pgup="" pgdn="" keys,="" but="" still="" not="" sure="" whether="" the="" bios="" update="" is="" the="" root="" cause="" of="" the="" battery="" charge="" issue.="" does="" anyone="" have="" the="" same="" experience,="" or="" know="" any="" solution="" to="">

  Problem solved by following these steps:

  1. Unplug the AC adapter / CC & remove the battery from the laptop
  2. Press the power button and hold for 60 seconds
  3. Plug the power adapter, put running the laptop and let windows start
  4. Leave it for 5 minutes then shut down windows
  5. When the laptop is turned off, insert the battery
  6. Turn the laptop computer, start Windows, and the battery indicator in the Windows taskbar should now display the battery level indication

• Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea

  So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.

  @jass007 ,

  Hello and thanks for the display on the HP support forums.  A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.

  The reason for this, it's a bit like a traffic COP for all the other drivers on the system.  I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.

  If you can make sure that you back up all data.

  Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.

  HP Mini 210 - 1014EA PC - software & drivers

  Once it's done Windows Safe Mode startup.

  Enter SafeMode (Windows 7)

  Once you're in safe mode, that you want to remove all your drivers.  You may need to uninstall one at a time and restart between uninstalls.  Don't forget to start mode without fail every time.

  When all the drivers have been removed.  Start Windows again normally. Here, you will need to install the drivers one at a time.  Be sure to start with the Chipset Driver first.

  Please let me know how it goes for you.

  Thak you again for the display and have a great day.