HP 15 laptop. : UNINSTALATION OF SOFTWARE.

Similar Questions

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• When installing or uninstalling the software get error 2378 - could not access VBScript Runtime for custom action

  I get error 2378 could not access VBScript Runtime for custom action, when I try to install the software and uninstalling some software.

  I tried several online for regsvr32 vbscript.dll fixes and nothing has helped.

  I tried to remove the keys from HKCU\Software\Wow6432Node and it is said that they do not exist.

  I have registered the VBScript engine in the folder it is installed, said successful but still does not work.

  I tried with run as administrator of the command-line also.

  It is a Dell laptop with Windows 7 Home Premium 64 - bit.

  Any suggestion would be appreciated.

  Thank you

  Oldestman

  Hello

  What operating system is installed on your computer?

  Method 1: This error message indicates that the VBScript engine is not currently registered on the machine where the installation/uninstallation. I suggest to try the steps below and check if the problem is resolved. If you have already tried these steps then we do know.

  Delete the registry following key then save the VBScript code and check if that helps:

  Step 1:  If you have a 64-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  reg delete "HKCU\SOFTWARE\Classes\Wow6432Node\CLSID\ {B54F3741-5B07-11CF-A4B0-00AA004A55E8}" / f

  If you have a 32-bit operating system, you must follow these steps:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  c. at the command prompt, type the following command and press ENTER:

  Reg delete "HKCU\SOFTWARE\Classes\CLSID\" /f {B54F3741-5B07-11CF-A4B0-00AA004A55E8}

  Step 2: Register VBScript by following the steps below:

  a. Click Start and type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. at the command prompt, type the following command and press ENTER:

  If you are using32 bit version of Windows, and then run the following command:

  regsvr32 vbscript.dll

  If you are using64 bit version of Windows, and then run the following commands:

  %windir%\syswow64 CD

  regsvr32 vbscript.dll

  d. after the command is executed successfully, try to install

  Method 2: Diagnose and correct program installation and uninstallation of the problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• Can I uninstall the software and reinstall it on another pc/mac

  I have a temporary cell phone. I need the cloud creative adobe on this, but as I have on my iMac as well; This keeps me it from uninstalling the software on the laptop in the future and put it back on a new? Thank you.

  Not need to uninstall, simply sign Adobe Creative cloud current computer and then go ahead and install app CC on new computer and activate the same by signing in.

  You can activate and use CC apps on 2 computers.

  There is no limit for the facilities, but the activation limit is 2.

  Connect and disconnect activate Cloud Creative applications

• Uninstall the software provided?

  How we uninstall the software that came with my laptop Sony VPCZ2390Z?

  Hello M-L-R,.

  Please visit the link below to access the Manager from the Application to the VAIO.

  This software will allow you to uninstall the preinstalled VAIO applications.

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1004059...

  If this suggestion is useful, please click on accept as a Solution.

• uninstall the software for iMovie?

  Re [late 2009 iMac Yosemite 10.10.5

  I spend more time to read messages on this community and on the web, trying to make iMovie to work, that I actually do use it lately.

  I'm frustrated and I want it works, or I want it has disappeared from my computer and my life.

  What will happen if I removed and used an alternative software like MacX converter?

  Y at - it uninstall the software (version 8) right and do it completely, and how the said software work with GarageBand, Photos etc, or would it?

  I know there will be a price to do this, but how bad it will be in terms of integration?

  I used a third-party application to uninstall iMovie. Now, I have to decide what to replace iMovie with.

• Do I need to uninstall the software on the keyboard?

  I just installed a new Microsoft keyboard.  I took out the CD of the software before hitting the installation "Finish" and got the error message that the installation is not complete.  How do we uninstall software so that I can reinstall it properly?  The keyboard seems to work as it should.

  Hi Heidi,

  1. what operating system is installed on your computer?

  2. What is the Microsoft Keyboard model number?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can insert the installation for the keyboard software CD in the CD drive and try to install it, and if the installation does not complete, then you can uninstall the software and reinstall from the CD, by following the steps in the link below.

  Uninstall or change a program:

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

   

  I hope this helps.

• Uninstall the software to free up memory space

  I was unable to uninstall the software from my computer.

  Hi TirrellCrawford,

  To better assist you, please provide the following details:

  (1) what programs you try to uninstall?

  (2) what happens when you try to uninstall?

  (3) you get an error message?

  (4) what version of Windows you are running on the computer?

  Method 1: You want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-in/Windows-Vista/delete-files-using-disk-cleanup

  Method 2: You can follow the steps mentioned in the link below to optimize the performance of Microsoft Windows Vista

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  You might want to know
  

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

• Any advice on how to completely uninstall the software Call of Duty?

  I can uninstall only a part of the software.  When click on remove the program, withdrawal starts but does not complete the task.

  Hello

  I suggest you try these methods.

  Method 1:

  How to change or remove a program in Windows XP.

  http://support.Microsoft.com/kb/307895

  Method 2:

  You can find the third-party application in your favorite search engine, where it will help you to completely uninstall the software Call of Duty.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  You can also refer to:

  How to manually remove programs from the add tool / remove programs.

  http://support.Microsoft.com/kb/314481

• By mistake I uninstalled the software locker victory

  Hi I'm new to the community and by mistake I uninstalled win software my computer Acer Aspire 5750Z locker. Please help me to download the software!

  If you do not request encryption software, it's good to not have WinLocker.

  It should be available in the software eRecovery sub, drivers, and Applications.

• Impossible to uninstall the software for a webcam creative labs.

  Impossible to uninstall the software for a webcam creative labs.

  Hello

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you cannot uninstall the webcam creative labs computer software.

  1. that you get an error trying to delete the software?

  2 has there been recent changes made on the computer before the show?

  I will certainly help you in uninstalling the software of the webcam. Here are some methods that you can try in order to solve the problem.

  Method 1: Fix problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2: How to troubleshoot problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic)

  Windows service install is missing from my Windows Vista Home Premium, 32-bit system, after uninstalling other software (IOLO System Mechanic). After a month of looking for the installation Service, I finally found that a group of 10 files and among them was this executable file
  x86_microsoft-windows-p... installerandprintui_31bf3856ad364e35_6.0.6002.18005_none_d83fb8abf30e1638_printui.exe_bb673fff
  If these are the files I'm looking for, what should I do to get them back to where they should do? Any help would be appreciated...

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• I can't uninstall my software!

  My software is no longer right for some reason any and I can use is no longer my wireless adapter.  I tried to uninstall the software, but it won't let me do that.  He gets 2 bars in the uninstall and then freezes.  Reinstallation does not work either.  He said that the program is already installed and will not overwrite it.  I tried everything, including a manual removal of files, but nothing works.  I tried to contact Linksys but its computer system has problems, and they say they can't help me now.  Does anyone know how to get this program off my computer?

  I had this problem. manual uninstall.

  http://www.Cryer.co.UK/Brian/Windows/howto_manually_uninstall.htm

• Impossible to uninstall WPC11 software in Windows XP

  I have a WPC11 card.  I want to uninstall the software.  When I go on the program group and select uninstall, I get a prompt telling me that this has been done. After you restart the computer and try to reinstall the software, I get a prompt telling me that the WPC11 software is already installed and return to the Group of programs to uninstall.  I also tried to remove the software using the add and remove programs in Windows XP.  The program group refuses to disappear.  I found a pgm of uninstall on the WPC11 cd and tried.  I get the same result.  The three methods give me a prompt that the software has been removed.  The cd doesn't give me the possibility of replacing the software.  Any ideas?

  After working more with CC Cleaner I finally found the secret to completely remove the WPC11 software.  After you have uninstalled the program WPC11 regular anyway, I went to CC Cleaner Tools button.  It appears in the section "Uninstall" the registry entries display a for installed programs.  The 'wireless pc card configuration utility network' has been registered.  At first, I was hesitant about deleting the entry.  I thought that the only reason that it was because the program still exists.  I had nothing to lose so I deleted the entry.  'participation' is what he needed to go.  I ran the vacuum cleaner again and rebooted.  I went to add or remove programs in Windows XP, and finally, the configuration utility was gone.  I reinstalled the WPC11 software from the installation cd, and this time it worked.  I'm back in business.  I just need to be more familiar with the CC Cleaner.  Thank you! for your help.

• HP Officejet Pro 8620: Should I uninstall printer software HP old when I buy a new printer HP

  I just bought a new HP Officejet Pro 8620.  To uninstall all the software printer for my old printer which is a Photosmart 6180?

  Hey @MCPhilly

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that you have an old printer and ask yourself if you need to uninstall the software for it. While leaving the old software on the system should not affect your system somehow, I suggest to just in case something strange should happen later.

  Please let me know if you have any other questions. If not, have a great week!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• I have 2 questions. The first is: How do we uninstall the software. The second is: need to defrag and if so, how can I do?

  How to uninstall unwanted software? and need defragmentation?

  How to uninstall the software: http://www.ehow.com/how_2091810_uninstall-software.html

  You don't need to defragment your drive. Vista does this automatically.

  teengeek.freehostingcloud.com