HP 15 Notebook PC: Update Synaptic TouchPad Driver problem

Similar Questions

• Cannot perform the specified command when I try to install the synaptic touchpad driver

  My led pen touchpad on my net book of HP compaq 2710p has stopped working. I downloaded the latest version of the HP driver, but when I try to install it I get the message "synaptic touchpad driver v13.2.6.2 could not execute the specified command line.

  A question for HP support, or their forums

• Synaptics Touchpad Driver problem - no driver appropriate to be installed (G580 20150)

  I downloaded the Synaptics Touchpad Driver for Windows 8.1 (32 - bit, 64 - bit) installed, but I get this error.
  

  What is Lenovo?

  Nassera salvation,

  Thanks for posting!

  Have you been able to check your touchpad settings before the upgrade if you have a touchpad Synaptics or momentum?

  According to the support download site, G580 could have Synaptics or momentum

  Elan touchpad, according to the support site doesn't have a driver yet for windows 8.1 and still works with the generic Windows 8.1 driver

  

  Concerning

  Solid Cruver

• Tecra M9 (PTM91E) and touchpad driver problem

  I had to install * Win 7, 64 bit * on my laptop * TECRA M9 PTM91E *.

  Most of the drivers could be found, but the * touchpad * is turned off. In addition (?) I get an error message, that a pilot for "* communication controller *" (ID: PCI VEN_8086 & DEV_2A04 & SUBSYS_00011179 & REV_03) is missing. Compatible devices would be PCI VEN_8086 & DEV_2A04 & REV_03

  I don't know, TECRA M9 is not supported by Toshiba for Win 7, but can someone help me with this problem of driver?

  Thanks in advance.

  Have you tried to install the driver for the touchpad Vista?

• Device driver problems"the operation requires an interactive window station

  Original title: device driver issues "the operation requires an interactive window station.  replaced the bad hard drive on laptop running Vista with Windows 7 HDD.

  I had two toshiba laptops satellite. On one, the hard drive went bad, the other liquid has been spilled, and the keyboard in ruins. The one with the bad hard disk was Windows Vista.  I replaced it with the hard drive of the other computer that uses Windows 7 Home Premium. Initially, it appeared, it would work without a problem, but I device driver problems.  First of all, it is audio and video.  When I updated the driver audio and restarted, Syntec PS / 2 touchpad no longer works. I tried (using the keyboard only) for updating the touchpad driver, but ultimately it fails with the message "the operation requires an interactive window station.  Then I tried to install a USB Microsoft Intellipoint mouse, it seems that the driver will be installed, but I had to use the keyboard to accept the terms and conditions. Then it errors "Setup was unable to install a required component: Microsoft Application Error Reporting." Restart your computer and try running the installer again. If this error occurs again, see the Readme file in help for more information. (Error code 1601).  How can I get my device drivers all working correctly?

  Best option is to reinstall the operating system.

  Also check this:

  This operation requires an interactive window station.
  http://www.TomsHardware.com/Forum/235014-44-this-operation-requires-interactive-window-station

  If the laptop is under warranty, contact Toshiba.

• Synaptic PS/2 Port Touchpad Driver Code 80240016 error

  During Microsoft updates on August 14, 2010, I received this error on my HP Pavilion tx2510us Entertainment Notebook PC.

  Do the following and it will be resolved the problem and the error.

  (1) unstall all the devices in the Manager device/mouse and other pointing under control panel devices.

  Click Start, control panel and click Device Manager (it is easlier to locate Device Manager using the classic version)
   
  Click on the + sign next to the "mice and other pointing devices."
   
  Double-click each list item, and then choose uninstall. When prompted with "Are sure you want to remove this element", click Yes. Repeat this operation for all items.

  Once all items are deleted; Close all open windows and restart the system.
   
  (2) turn off your Antivirus Security Suite for this installation.

  (3) install the driver for the Touchpad Synaptic PS/2 Port/file name sp39279.exe which provides HP:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-60970-1&LC=en&DLC=en&cc=us&...

  (4) restart the laptop as requested.

  (5) perform an update from Microsoft.

  (6) install the Synaptic Touchpad PS/2 Port driver.

  7-restart the computer.

  (8) perform an update from Microsoft.

  (9) if the Synaptic PS/2 Port Touchpad Driver is identified again. Do not do an update this time.

  (10) restart the computer.

  (11) to perform an update from Microsoft and Synaptic PS/2 Port Touchpad Driver should not appear this time.

  Hey

  Check "Add Remove Programs" or "programs and features" and uninstall the Synaptics Touchpad software.

  reboot PC

  Take Synaptics Touchpad Driver

  Note: Your laptop Touchpad is not working correctly?

  Kind regards

  EverWin

• HP Envy 17 Notebook PC TS: Can't update the video driver

  HP Envy 17 Notebook PC TS

  F9M13UA #ABA

  64 bit

  I upgraded to win 10. Now when I try to open CC Adobe Illustrator I get this message: "one or more cards software drivers are not updated. To use the GPU Performance, upgrade the software drivers to the latest version and then restart illustrator".

  I ran the program from the HP driver from the HP site search and I get this: "HP has encountered an error when trying to analyze your product. " Please verify that your product is turned on and connected, and then try again in a few minutes. Or display all drivers available for your product below. »

  I found a driver in the list below this message

  High definition (HD) of Intel Graphics Driver 10.18.15.4248 place 169.2 MB 25 January 2016

  I tried to install it and got a different error message saying "the pilot is not validated for this computer. You can get the correct driver from the manufacturer of the computer. »

  I'm not a computer genius. All I want is for Illustrator work. How can I get the driver I need?

  archivedmemorie

  Based on your response, I did a new search for the drivers of your PC, based this time on the product number that you provided, instead of the template information in your thread title and found very different results!

  Here is the link for the drivers and software page: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-TouchSmart-17-j100-Notebook-PC-series/5425742/model/7415743

  The Intel driver you mentioned matches on the page - so I have no idea why you get this error message.

  Have you tried to download and install the Nvidia driver?

  Given that your PC is so recent, I suggest you contact the HP customer directly and have them put you in contact HP Technical Support.  If all goes well, they can solve the driver problem, you meet with.

  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1

  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Good luck

• the touchpad driver Synaptic starts do not at startup

  Pavilion dv7
  Windows 7 Home Premium 64-bit
  no error message, the driver of the synaptic touchpad that allows scrolling and zoom does not start when I turn on the computer.
  Recently, one of my friends turned a few drivers/software, saying he'll make my laptop run a little faster...
  scrolling doesn't work anymore so I returned all the settings to the way that it used to be (by default), but scrolling does not work when I start my laptop. I still have go to the control panel to open the pilot of the synaptic touchpad for scrolling to work.

  Hello

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55107.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  As this is a new installation, you may need to configure the parameters of scroll and others for the first time - all of the configurable options available are described here.

  Kind regards

  DP - K

• Reference Dell touchpad driver updated for Windows 10 new gesture

  Hello

  A new major upgrade for Windows 10 has been released a few days ago, and the update included a new gesture that allow the user to pass the workstations with 4 fingers on the touchpad and slide between the left or right to switch workstations.

  This new gesture does not work on my touchpad and I guess this can refer to the current version of the touchpad driver is not yet supported in this function because other gestures as three finger swipe to move all open windows and three finger tap to call Cortana are always works well for me.

  I was wondering if there is no update for the driver for the touchpad to soon, or all those were just my own question...

  Thank you!

  CALVINLAU0914,

  Can you give us the model of the computer you have so that I can look for drivers?

• HP g6-1b68nr KNOW SYNAPTIC TOUCHPAD...

  SYNAPTIC TOUCHPAD TIPS g6-1b68nr - function still portable great!  EXCEPT -

  It's 3 years since I purchsed 2 exactly the same Pavilion g6-1b68nr notebooks. One that I have used myself and it has TOUCHPAD intact SYNAPTIC functions; works very well.

  The other I just started to use again (different House) but Synptics are still missing from the search menu.

  Looking for the right HP or any other link secure, to reinstall the software, or perhaps, all that is needed is update driver? I'm not sure.

  Thnx for any advice. Today is December 10, 2014

  Hello:

  All I can say is that your laptop is supposed to have a Synaptics touchpad/mouse.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100216-2&cc=us&DLC=en&LC=en&OS=4063&product=5128912&sw_lang=

  If you want to try the latest version of the driver you can get it to Synaptics on the link below.

  http://www.Synaptics.com/en/drivers.php

• HP notebook G70 - keyboard and Touchpad problems

  Keyboard and Touchpad not working not after that I had to reset my laptop to factory settings after serious a virus put hand on laptop. I managed to make the keyboard work via help but as soon as windows update "updates" it makes my keyboard does not work yet so I have to go back to old keyboard version - help!

  In addition, currently, I use a USB mouse is connected but not my touchpad integrated on the laptop :(

  My laptop is a HP G70 Notebook PC - 32 bit... Help! : o /

  Hello

  ·         You remember update is caused the problem?

  Method 1:

  Try to update the drivers for your hardware from this link: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Method 2:

  Update the drivers of your keyboard and touchpad and check if this may help: http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3768356&taskId=135

• Value added package and touchpad driver for Linux

  I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux.

  Where can I find it?

  Hello!

  I put t know what phone you have but the Toshiba value added package is available for Windows. I checked the Web from Toshiba site but for Linux I can t find it.

  The driver for the touchpad, normally you can also find on the Toshiba site but it s is only available for Windows. Maybe you can find a driver on the site of the factory, for example, Synaptic.

  Good bye

• stream HP 11: touchpad driver does not

  Hello. I have reset my laptop due to problems of storage and the laptop is turned off and the whole process of resetting messed up until the bootmgr file is missing, I downloaded a file of windows on another computer * NOT ORIGINAL * and installed via USB key... Now everything was over some pilots were not available eg.wifi driver, that I had to download but when I reached the syntpatics touchpad driver or so its installed says ready to use, but I see nothing in that only some unknown device in Device Manager tried update and nothing went parameter-devies and still nothing it shows nothing there what should I do... I'm tired of using a usb mouse

  See this.

• Portege Z30 / driver Audio Replicator + Touchpad scroll problems

  Hello.

  I bought a Z30 and I'm pretty happy with it that I worked for years with the Thinkpads (+ Dock)
  but there are a few light (more or less can be addresses as a driver) questions that I discovered.

  Notice: I use Win7 64.

  (1) with the Replicator Docking Station, I'm not able to remove the USB Audio device is currently running.
  As you play a video or music. -J' looked for a newer driver (from C-MEDIA) as the standard Microsoft Driver may not be the best choice but I have found NO Win7 drivers for this device. The pilots of C-MEDIA only I found is Win8.

  (2) ALPS Touchpad (pilot)... EH... the material error only on this model really seems to be the touchpad. It is quite difficult to click on buttons AccuPoint (those under the keyboard) and drivers of touchpard are not flexible somehow. Gestures are not actually enforced as it should... seems to be as ALPS had to work on without a lot of time. Synaptics would have been a much better choice.
  The driver cannot be adjusted to speed with scroll gestures and by default is AVERAGE... really ridiculous WAY to fast. In short, it is unusable for regular use. That the effects of tape, the gesture with two fingers and also the gesture of circle. He is desperately missing from a slider to change speeds. Or at least some indication of registry settings.

  Also please advice DAPS to add finger 2 tap as a regular feature in the driver. It can be used without any problem after minor registry change and it works without any problem.

  (3) in the manual NFC is listed, but I have not found ANY Z30 Z40 (Tecra) model has / contain probably the NFC module. -I've seen in some photos the flexband connector (must be for NFC) above the battery is actually present. -There will be a few spare parts (Please give me the ID number /) in the future?

  (4) smart card reader driver problem: I'm using the latest drivers and after some time and sleep (with Intel Rapid Start) the player first must be deactivated and reactivated to rework. certutil.exe - scinfo unresponsive until I have disable and re-enable the device.

  (5) I am absent in BIOS/UEFI to exclude startup devices. -This is normally a must have feature.

  I think that the user manual contain parts which refers to different models of Toshiba as Portege Z30-A/Z30t-A / Satellite Z30-A/Z30t-A

  Some models are equipped with an NFC function, but can not say with certainty what models support this feature exactly.
  It turns out that in many cases the m2 additional connector be responsible for these additional modules.

  Regarding the mode of UEFI: check if the BIOS update would add it. Some portable computers taken over this function after that the BIOS updated.

• HP 250 G3: I can't find the touchpad driver

  Hi all!

  I recently bought a nice HP 250 G3 (code: J4R70EA). I am very sattisfied with my purchase (even if there is a dead pixel that now I've corrected). I also managed to install and find all the drivers (since it came with FreeDOS), except for the touchpad driver. The touchpad works but all useful actions are missing.

  Can you please help to find the last updated driver for my touchpad so that I can use gestures effectively?

  PS: I have a 32 bit Windows 7 OS. HP only provides 64-bit for my laptop drivers. I like to keep 32-bit.

  Thank you!

  Thanks for the reply!

  I just think that 64-bit OS are a unacessary transition. For my average use (navigation, Office suite, etc.) and since I was only 4 GB of RAM, I wouldn't benefit by using a 64 bit OS.

  64-bit OSs are not an operating system more safe and stable. Yes, I'm aware of backward compatibility, but why I want to install 64-bit software because they use more resources (both in terms of disk space and RAM) when all I need is available in 32-bit?

  Perhaps you have more than 4 GB of RAM, and maybe you're using a program like Photoshop or Auto CAD. If this is the case I certainly recognize the need for a 64 bit OS. Otherwise, for the average user, 64-bit is just a hype, a marketing tool or a buzz.

  These are just my 2 cents

  PS: I tried these driver yesterday and it didn't really install anything. I tried earlier official HP drivers and magically everything works. Thus, they are not a driver 64 bit OS only after all