the touchpad driver Synaptic starts do not at startup

Similar Questions

• Satellite Pro A200 - vertical scrolling on the touchpad doesn't work does not after update

  Hello

  My A200 told me that I needed to update the drivers for my touchpad. I did it and now I can't use the vertical scroll feature. I looked on the site Web of Synaptic and there is nothing there to help. I checked to see if I have the drivers updated and I do, and I've looked through the settings of the mouse and can't find anything that will help you.

  Can someone help me please?

  Thank you very much
  Ian

  Hi Ian

  Why you n t trying to roll back the BONE to this early time?
  I mean the point OS before you installed the touchpad driver

  Usually, this should help to recover the functions first touchpad.

  Best regards

• HP 250 G3: I can't find the touchpad driver

  Hi all!

  I recently bought a nice HP 250 G3 (code: J4R70EA). I am very sattisfied with my purchase (even if there is a dead pixel that now I've corrected). I also managed to install and find all the drivers (since it came with FreeDOS), except for the touchpad driver. The touchpad works but all useful actions are missing.

  Can you please help to find the last updated driver for my touchpad so that I can use gestures effectively?

  PS: I have a 32 bit Windows 7 OS. HP only provides 64-bit for my laptop drivers. I like to keep 32-bit.

  Thank you!

  Thanks for the reply!

  I just think that 64-bit OS are a unacessary transition. For my average use (navigation, Office suite, etc.) and since I was only 4 GB of RAM, I wouldn't benefit by using a 64 bit OS.

  64-bit OSs are not an operating system more safe and stable. Yes, I'm aware of backward compatibility, but why I want to install 64-bit software because they use more resources (both in terms of disk space and RAM) when all I need is available in 32-bit?

  Perhaps you have more than 4 GB of RAM, and maybe you're using a program like Photoshop or Auto CAD. If this is the case I certainly recognize the need for a 64 bit OS. Otherwise, for the average user, 64-bit is just a hype, a marketing tool or a buzz.

  These are just my 2 cents

  PS: I tried these driver yesterday and it didn't really install anything. I tried earlier official HP drivers and magically everything works. Thus, they are not a driver 64 bit OS only after all

• Re: Satellite L655 - the Touchpad on/off button does not work

  This morning, I noticed that the power button of the touchpad of my Satellite does not, although the Fn + F9 key combination works by enabling and disabling my touchpad.

  It was working well until what I slept last night when I woke up, my laptop has rebooted due to updates of Windows during the night. I don't read anything since I have been using a wireless mouse. Then reach work and check if I can activate my touchpad (Windows has loaded and connected), the display screen that shows if the touchpad is active or not does not appear and my touchpad, power button does not work.

  Any help is greatly appreciated.

  Thank you.

  Is this problem only you?
  I mean it's not so important, and I would not reinstall or change anything because of this.
  Until you can use the FN + F9 key combination I put t think it's a serious problem.

  What do you think of this?

• problem with scroll - the touchpad on my laptop does not work as it should.

  When I open anthing the page down to the bottom and I can't scroll to the top. I have to press the up button the page upward and sometimes that doesn't work. What ca I do t get it working again? The touchpad on my laptop does not work as it should. I should be able to press on and get my finger upwards or downwards and have the page up or dwn and this isn't. Please can you help me with this?

  In Winupdate settings provide "recommended updates" is disabled. (Allow the important updates)

  Go to your laptop manufacturers site, reinstall the touchpad drivers and graphics drivers

• OS not found on the c: drive, cannot start windows

  Today, I tried to restart my laptop and all of a sudden, they won't let me restart. It keep telling me that I can't or my hard drive is too small. and I tried all the option, even tried to restore my c: drive, but then he told me that I have to choose: full system restore:.

  However, full system restore wasn't in one of my options and after that I dropped to restart the laptop want to just start over my windows, but then I can't do more because in the Windows error recovery just an option that is recovery tools, it doesn't have the choice as boot the system normally.

  So now I can't enter to windows or restart my computer, how do I get into my windows again? Help, please. :(

  Hello

  
  1. What is the exact error message you get?
  
  Method 1: I suggest you try the steps from the following link

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  Method 2: go to the BIOS (Basic Input Output system) Setup, & change the switch setting between AHCI (Advanced Host Controller Interface) and IDE (Integrated Drive Electronics), SATA (Serial Advanced Technology Attachment) and the drive controller is restarted. If it solves your problem, the driver for the HARD disk (HDD) is corrupted.

  IMPORTANT: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 3: Your hard drive is damaged to the point that it cannot even recognize that Vista has been installed on it. If you have a Windows Vista installation disc, you can try running chkdsk to fix the HARD disk; you need to restart (boot) your computer using the installation disc.

  a. Insert the installation disc and restart your computer.
  b. click the Start button, click the arrow next to the button lock and then click on restart.
  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see check the link for the BIOS: frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/BIOS-frequently-asked-questions

  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. in the System Recovery Options menu, click command prompt
  h. type chkdsk /f / r and press ENTER.
  
  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  This will perform a disk check and perhaps recover the system. CHKDSK can repair problems related to bad sectors, lost clusters, reticulate files and directory errors

   

  Method 4: I suggest you run /ScanOs, /FixBoot commands from following link:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• New Lenovo Ideapad Z710 friend refuses to install the touchpad driver.

  A few weeks ago my friend bought new a laptop Lenovo Ideapad Z710 pre-installed with Win8. I "upgraded" to Windows 7 for him, as none of us can handle the new OS. Usually, I have no trouble to reinstall the drivers after installing a new OS, but for some reason that its touchpad driver does NOT install.

  I use the official driver for his computer, apparently is a synaptics driver and it says it should work completely fine with Windows 7, but when I try to run the installation, I get the error "Synaptics Device Not Found!"

  There are a few issues that I believe are related to the driver not being installed that can tell you something. When he closes the lid of the laptop and open it again, the mouse jumps over the screen constantly, and he can't use the computer until it restarts. In addition, he cannot turn his touchpad, which I suppose is a function that comes with the driver.

  Any help or contribution is greatly appreciated, if you need more information, do not hesitate to ask.

  Thanks again,
  -Tyler

  Are you sure the touchpad isn't a Synaptics touchpad ElanTech? If ElanTech, try to uninstall the currently installed driver. Then install the driver from the website. During the installation of the driver not to put a check mark in the box that says driver Synaptics install now.

• Remove the old driver of start-up

  I have a laptop which has been previously imaged (working machine) and I think that my problem of slow start is that the image was created on a computer AMD and the laptop itself is an Intel, one.  I keep getting "the next (s) starting or starting system could not load: ahcix86 ' in the vewer event.  And wise to time, it seems to be the best in the time of loading.

  ahcix86.sys exists in C:\WINDOWS\system32\driversC:\WINDOWS\system32\drivers

  Is it possible to prevent to load this driver?  (or if not where should I look :))

  http://support.Microsoft.com/kb/315311

• 7558 the touchpad driver/app

  I have an old Inspiron of 2 weeks 2-in-1 15 7558 i5 8G 500GHD. Windows 8.1 running of the factory.

  The problem is that I can't control the touchpad. The biggest problem is the tap to click. The whole buffer including buttons move the mouse and reacts to the tap to click. It's very frustrating, because when I press the button all sorts of crazy mouse click on register or when I try to click on a button, the mouse cursor moves because the button is part of the touch pad.

  All I want to do is disable tap-to-click. When I open Control Panel/mouse there is no touchpad tab nor the controls for the touchpad. In Device Manager, the Mouse/touchpad driver appears as a driver MS Mouse 2008 that seems very wrong, especially now that it is so from the factory. I checked the site driver from Dell for one pilot different both by model number and serial number, no driver of the touchpad or app. I found synaptics, Alps, ealn and Cyprus drivers on the web, but none of them work.

  Any fix for that? Looks like that tactile disabling click should be obvious.

  Thank you

  Don

  > BTW, your link is the 7568-oriented and I the 7558
  Oh, sorry...

  I'm not a native speaker of the English language and then apologize when there is an error.

  Methods that are introduced in this page (www.ryukent.com/.../fixed-install-synaptics-touchpad-driver-windows-8-1), I think it's probably the same way you did.

  and, there is a description that I think is important.

  My system does not display Synaptics tab in the Panel :(
  But
  Run program files \ Synaptics------SynTP------SynTPEnh.exe

  in this case, I think that even if there is no tab for synaptics to control panel, the installation was successful.

  Thus, if the information from the registry on synaptics is saved and customize it, I think it's possible to tap not valid click.

  The registry of my laptop with a synaptics entry is in
  HKEY_CURRENT_USER-Software-Synaptics

  y at - it registers for registration on synaptics in your pc?

  At the same time, either, but this is not a solution, is it possible to use this software?
  Forum.TabletPCReview.com/.../TwoFingerScroll-v1-0-7-Update-Two-Finger-scrolling-Done-Right-more.38405
  I usually use one of the functions that are provided by this software, when you are touching with a finger, clicks when you tap on the other finger.

  in this feature, I make it easier to click after the cursor of the mouse movement with trackpad.
  This software is for synaptics trackpad, so I hope this helps app to use the trackpad on your portable computer.

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• someone at - it get the PVSCSI driver works under XP (not supported)?

  Pvscsi. INF file specifically excludes XP but supports Windows 2003.  Like many

  other drivers that work in both this disc might as well, if the. INF file has been correctly

  modified.  I'm going to recognize and install the driver, but it does not start. It is possible

  or likely that I have not changed the. INF correctly.

  The inf in the package "VMware Tools.msi" file and can be retrieved using

  UniExtract.   (also other drivers can be extracted and a XP nlite-ed nice)

  disk can be made to Hardware Version 7, but that's another post)

  I know that XP is EOL this month but thought it might be useful for benchmarking.

  If the storport driver based (as opposed to scsi miniport) it'll work only on XP x 64, storport is not supported under XP x 86.

• Tecra S1: The Touchpad driver

  I reinstalled WIN - XP on my S1 and also used the drivers that I downloaded from the Toshiba site.
  Almost everything has worked well again except the WLAN (had to download a driver from Intel) and the touchpad.
  The touchpad still works with the basic functions, but I can't put horizontal or vertical scrolling to work.
  Can someone help me with this?

  It's cool that you have given feedback. Sometimes, such errors are happening to all of us. ;)

  Welcome and good evening

• Re: Portege Z930 (PT234) where to find the touchpad driver

  I tried the Alps and which gave me touch Synaptics feature is now impossible to install.

  Question:
  Where can I find the touchpad for portege Toshoba Z930 drivers?

  You will get all the drivers for your laptop on the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

• Satellite L40 - 18W PSL4CE - while charging the Touchpad doesn't work does not correctly

  Hi all..

  I'm on Toshiba Satellite L40-18W-PSL4CE model 00H0000GAR...
  Recently, my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter...
  My touchpad does not work correctly...
  That is to say... If I work with baterry the touchpad works very well... If I connect to the AC adapter the touchpad works not properly but the external pout works well.

  Please help me...
  Thanks in advance...

  > Recently my adapter went cause of overvoltage... so I changed the new adapter after changing the new adapter my touchpad is not working properly...

  Using the power adapter Toshiba original and recommended?
  In my opinion, the issues could be linked to the new Ac adapter and may happens with an adapter not entirely comatibel AC